• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.194-202
• /
• 2015

본 연구에서는 수직 진동에 노출된 승객의 승차감을 정량적으로 분석하기 위해 점탄성 특성을 가진 시트에 기댄 인체의 동적 모델링을 제시한다. 시트 위 인체의 운동을 기술하기 위해 문헌에서 찾은 5자유도계 다물체 동역학 모델이 이용되었다. 철도차량 시트에 사용되는 점탄성 특성은 비선형 강성 특성과 시간 지연을 표현하는 컨볼루션 적분으로 수식화된다. 바닥 가진에 대한 전달함수를 분석 결과 시트의 비선형 특성으로 인해 입력 가진의 크기에 따라 전달함수는 변하는 것으로 나타났다. 측정된 철도차량의 바닥 가진을 이용하여 실제적인 인체 진동 특성을 분석한다. 주파수 가중치 자승평균치 값을 계산하고 시트 설계 파라미터가 이 주파수 가중치 자승평균치에 미치는 영향을 제시한다.

• 한국측량학회지
• /
• 제37권5호
• /
• pp.293-302
• /
• 2019

In mountain accident events, it is important for the search team commander to determine the search area in order to secure the Golden Time. Within this period, assistance and treatment to the concerned individual will most likely prevent further injuries and harm. This paper proposes a method to determine the search priority area based on missing persons behavior and missing persons incidents statistics. GIS (Geographic Information System) and MCDM (Multi Criteria Decision Making) are integrated by applying WLC (Weighted Linear Combination) techniques. Missing persons were classified into five types, and their behavioral characteristics were analyzed to extract seven geographic analysis factors. Next, index values were set up for each missing person and element according to the behavioral characteristics, and the raster data generated by multiplying the weight of each element are superimposed to define models to select search priority areas, where each weight is calculated from the AHP (Analytical Hierarchy Process) through a pairwise comparison method obtained from search operation experts. Finally, the model generated in this study was applied to a missing person case through a virtual missing scenario, the priority area was selected, and the behavioral characteristics and topographical characteristics of the missing persons were compared with the selected area. The resulting analysis results were verified by mountain rescue experts as 'appropriate' in terms of the behavior analysis, analysis factor extraction, experimental process, and results for the missing persons.

• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.135-144
• /
• 2001

The capital cost of the company is one that must be paid to the money owner as the price by using the money. The capital cost according to the source of money supply can be estimated by the expected profit rate undertaken by the use of the capital. But in the area of pre-existent economic evaluation, the evaluation of the company investment has been treated by the profit rate of the capital after considering the repayment conditions of the other's money or the interest. Thus in this study, in case the company makes an investment on various kinds of the capital at the same time, not make use of the capital as a one source, the economic evaluation of an investment should be handled by taking the weighted average cost of capital into consideration in proportion to the constitution of the capital cost by the sources of money supply, Especially, as the cost of the private money is very much connected with the profit rate through the stock market, the Capital Asset Pricing Model (CAPM) will be applied. This kind of economic evaluation method can be said to have much to do with the Economic Value Added : EVA) as well as to be highly thought as a standard to estimate the company' value recently To certify the usefulness of this approach, the case study of the output of the capital cost will be made for the purse of the economic evaluation of the alternative investment by using the financial statements of a motor company H.

• 설비공학논문집
• /
• 제28권12호
• /
• pp.502-508
• /
• 2016

An optimized PI controller design method is presented to promote the control performance of an oil cooler system for high precision machine tools. First, a transfer function model of the oil cooler system with a variable rotating speed compressor was obtained by the perturbation method as the first order system with a negligible dead time. Then, the closed-loop control system was described as the second order system with a zero. Its dynamic behaviors are mostly governed by characteristic parameters, the damping ratio, and the natural frequency which is incorporated in PI gains. Next, an optimum integral of the time-weighted absolute error (ITAE) criterion was applied to the second order system. The characteristic parameters can be determined by the given design specifications, percent overshoots and settling times and comparisons with the ITAE criterion. Hence, the PI gains were plainly identified in a deterministic way. Finally, the PI gains were fine-tuned to obtain desirable dynamics in real systems, considering the zero effect and parameter variations. The validity of the proposed method was proven by computer simulations and real experiments for selected cases.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2003년도 춘계학술대회
• /
• pp.214-225
• /
• 2003

Now a day, the company must strengthen the contact-point of the customer who the company has and has to block the secession of the customer by providing services or goods on time. Under this market situation, the corporation extends the CRM for the customer management and strategic management, and set the CRM-strategies up for managing the customer relationship. For this, the present enterprise's level and the business-ability for the management of the customer relationship should be considered. Therefore, in this study, we will analyze the critical factors to set the CRM up as a strategy by studying the literature review. In the critical factors, the factors of enterprise level as well as the technical factor will be included. Secondly, as you know, the BSC is used to evaluate the corporation as a index. In this study the BSC model is changed and rearranged for the applied BSC model to measure the C3M level of companies. Thirdly, based on the model developed, the factors in the first step are classified by levels and weighted values are calculated by using AHP method. As a result, we will show the diagnostic model for check the operational performance of management, marketing and sales etc.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1363-1370
• /
• 1997

Single liquid droplet combustion processes including heating, evaporation, droplet burning and flame radiation were theoretically investigated by adopting nongray gas radiation model for the radiative transfer equation (RTE). n-Heptane was chosen as a fuel and the numerical results were compared with the experimental data available in the literature. The discrete ordinate method (DOM) was employed to solve the radiative transfer equation and the weighted sum of gray gases model (WSGGM) was applied to account for nongray effect by CO$_{2}$, and H$_{2}$0. Therefore, detailed effects by nongray gas and its comparison with the gray gas model could be figured out in the results. It is found that the radiative heat flux is higher when the nongray model is used, thereby reducing the maximum gas temperature and the flame thickness, but the total burning time increases due to the deceased conductive heat flux in nongray model. Consequently, a better agreement with experimental data could be obtained by using nongray model.

• 대기
• /
• 제28권3호
• /
• pp.291-303
• /
• 2018

In this study, a new consensus technique for predicting tropical cyclone (TC) intensity in the western North Pacific was developed. The most important feature of the present consensus model is to select and combine the guidance numerical models with the best performance in the previous years based on various evaluation criteria and averaging methods. Specifically, the performance of the guidance models was evaluated using both the mean absolute error and the correlation coefficient for each forecast lead time, and the number of the numerical models used for the consensus model was not fixed. In averaging multiple models, both simple and weighted methods are used. These approaches are important because that the performance of the available guidance models differs according to forecast lead time and is changing every year. In particular, this study develops both a multi-consensus model (M-CON), which constructs the best consensus models with the lowest error for each forecast lead time, and a single best consensus model (S-CON) having the lowest 72-hour cumulative mean error, through on training process. The evaluation results of the selected consensus models for the training and forecast periods reveal that the M-CON and S-CON outperform the individual best-performance guidance models. In particular, the M-CON showed the best overall performance, having advantages in the early stages of prediction. This study finally suggests that forecaster needs to use the latest evaluation results of the guidance models every year rather than rely on the well-known accuracy of models for a long time to reduce prediction error.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.503-517
• /
• 1995

강제대류 천이비등 열유속을 보다 실제 적으로 예측하기 위한 역학적 모델을 개발하였다. 이 모델은 가열된 벽면 근처를 어떤 기포기둥(Vapor Blanket)이 통과할 때 일어나는 다단계 비등과정 즉, 임계 기포기둥의 형성, 기포기둥밑의 미소액막(Macrolayer)의 기화 및 고갈, 그리고 얇은 기체막에서 일어나는 불안정한 막비등과정에 기초하였다. 핵비등이탈점 (DNB )과 막비등이탈점 (DFB)사이의 천이비등 곡선상의 열유속은 임계 기포기둥이 주어진 벽면을 통과할 동안 상기한 각 비등과정의 지속 시간비(Time Fraction)를 각 비등열유속에 곱한 후 그것을 합하여 정량화하였다. 이 모델의 예측치를 현재까지 발표된 문헌들에 나타난 실험치와 비교한 결과, 본 모델은 저건도 및 10 bar 근처의 고압조건의 실험치를 잘예측하는 것으로 나타났다.

• 한국강구조학회 논문집
• /
• 제20권1호
• /
• pp.21-31
• /
• 2008

응답면기법(RSM, Response surface method)은 복잡한 구조물의 매우 작은 발생확률이나 신뢰성해 석에서 폭넓게 사용된다. MCS(Monte-Carlo Simulation)방법은 어떤 시스템의 평가에서도 사용될 수 있으나 해석시간이 파괴확률의 역수에 비례하게 되어 발생확률이 매우 희박한 시스템의 평가에 불리하다. 확률유한요소해석법은 이러한 MCS의 한계점을 해결해 줄 수 있는 대안이 될 수 있다. 그러나 이 방법은 평균과 표준편차 등이 모델링 (내부 프로그래밍)된 특별한 프로그램에서만 적용 가능하며 임의의 범용소프트웨어의 응답을 모델링하거나 임의의 프로그램의 특성을 이용할 수가 없다. RSM방법은 복잡한 구조시스템에서 응답에 대한 회귀모델을 구성하여 효율적인 해석단계를 통해 시간과 노력을 획기적으로 절감시킬 수 있다. 그러나 RSM의 정확도는 한계상태방정식의 선형성과 축점간의 거리에 영향을 받게 된다. 이런 단점을 해결하기 위해 한계상태방정식의 선형성과 무관하게 정확한 수렴해를 구하기 위한 개선된 적응적 응답면기법을 개발하고 선형과 2차형식의 응답면방정식에 대한 2가지 예를 들어 검증하였다. 검증결과 가장 효율적인 RSM기법을 결정하였다. 개발된 선형적응적가중응답 면기법 (linear adaptive weighted response surface method, LAW-RSM)은 비적응적이거나 비가중형식의 2차 RSM기법에 비해서 정해의 신뢰성지수에 가장 근접한 정확성과 수렴성을 나타낸다.

• 품질경영학회지
• /
• 제27권4호
• /
• pp.123-142
• /
• 1999

Conventional SPC assumes that observations are independent. Often in industrial practice, however, observations are not independent. A common approach to building control charts for autocorrelated data is to apply conventional SPC to the residuals from a time series model of the process or is to apply conventional SPC to the weighted or unweighted subgroup means. In this paper, we propose a robust CUSUM control scheme for the detection of level change, without model identification or subgrouping of autocorrelated data. The proposed CUSUM chart and other conventional control charts are compared by a Monte Carlo simulation. It is shown that the proposed CUSUM chart is more effective than conventional CUSUM chart when the process is autocorrelated.