• Annual Conference of KIPS
• /
• 2007.05a
• /
• pp.667-670
• /
• 2007

볼륨 데이터에 대한 압축 기법의 필요성은 데이터 용량의 증가와 네트워크 사용량의 증가와 함께 더불어 증가해 왔다. 현재에는 다양한 압축 기법이 개발돼 있으며, 사용자는 데이터 유형이나 응용 분야에 맞춰 압축 기법을 선택, 적용할 수 있다. 그러나 최근에는 응용 과학자들로부터 생성되는 데이터의 용량이 기하급수적으로 증가했는데, 이렇게 응용과학 분야에서 생성되는 데이터는 대부분 3차원 볼륨 데이터다. 2차원 이미지나 3차원 동영상 데이터의 경우에는 다양한 표준 압축 방식을 사용할 수 있지만 3차원 볼륨 데이터에 적용할 수 있는 방법은 한정돼 있으며, 특히 시간가변(time-varying) 볼륨 데이터에 대한 압축 표준은 거의 존재하지 않는다고 볼 수 있다. 본 논문에서는 시간가변 볼륨 데이터에 대한 압축 방식을 제안한다. 이 방식은 가시화를 목적으로 하는 시간가변 볼륨 데이터의 인코딩을 목적으로 하며, MPEG의 I-프레임과 P-프레임 개념을 사용해서 압축률을 높인다. 본 방식은 시간가변 부동 소수점 데이터(single precision floating-point data)로 구성된 시간가변 볼륨 데이터를 대상으로 하는데, 한 블록 단위의 무작위 복원을 지원하며 Daubechies 웨이블릿 필터와 프레임간의 상관 관계를 사용, 대형 시간가변 볼륨 데이터를 이미지 화질을 보존한다.

• Advances in nano research
• /
• v.9 no.1
• /
• pp.59-67
• /
• 2020

Filter cake formation during rotary drilling operation is an unavoidable scenario, hence there is need for constant improvement in the approaches used in monitoring the cake thickness growth in order to prevent drill-string sticking. This study proposes an improved model that predicts the growth of mud cake thickness overtime with the consideration of the addition of nanoparticles in the formulated drilling fluid system. Ferric oxide, titanium dioxide and copper oxide nanoparticles were used in varying amounts (2 g, 4 g and 6 g), and filtration data were obtained from the HPHT filtration test. The filter cakes formed were further analyzed with scanning electron microscope to obtain the morphological characteristics. The data obtained was used to validate the new filtrate loss model. This model specifically presents the concept of time variation in filter cake formation as against the previous works of constant and definite time. Regression coefficient which is a statistical measure was used to validate the new model and the predicted results were compared with the API model. The new model showed R² values of 99.9%, and the predictions from the proposed filtration model can be said to be more closely related to the experimental data than that predicted from the API model from the SSE and RMSE results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.3
• /
• pp.326-333
• /
• 2003

In the measurement using DMA and CPC in series, there is some time delay for particles classified in DMA to detect in CPC. During this time, the DMA time-response changes due to the velocity profile of sampling tube and the diffusion of particles in the volume that exists between the DMA exit and the detector of ultra-fine CPC. This is called mixing effect. In the accelerated measurement methods like the TSI -SMPS, the size distribution is obtained from the correlation between the time-varying electrical potential of the DMA and the corresponding particle concentrations sampled in DMA. If the DMA time -response changes during this delay time, this can cause the error of a size distribution measured by this accelerated technique. The kernel function considering this mixing effect using the residence time distribution is proposed by Russell et al. In this study, we obtained a size distribution using this kernel to compare to the result obtained by the commercial accelerated measurement system, TSI -SMPS for verification and considered the errors that result from the mixing effect with the geometric mean diameters of originally sampled particles, using virtually calculated responses obtained with this kernel as input data.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.1-14
• /
• 2021

It is highly challenging to measure the efficiency of electric vehicle charging stations (EVCSs) because factors affecting operational characteristics of EVCSs are time-varying in practice. For the efficiency measurement, environmental factors around the EVCSs can be considered because such factors affect charging behaviors of electric vehicle drivers, resulting in variations of accessibility and attractiveness for the EVCSs. Considering dynamics of the factors, this paper examines the technical efficiency of 622 electric vehicle charging stations in Seoul using data envelopment analysis (DEA). The DEA is formulated as a multi-period output-oriented constant return to scale model. Five inputs including floating population, number of nearby EVCSs, average distance of nearby EVCSs, traffic volume and traffic congestion are considered and the charging frequency of EVCSs is used as the output. The result of efficiency measurement shows that not many EVCSs has most of charging demand at certain periods of time, while the others are facing with anemic charging demand. Tobit regression analyses show that the traffic congestion negatively affects the efficiency of EVCSs, while the traffic volume and the number of nearby EVCSs are positive factors improving the efficiency around EVCSs. We draw some notable characteristics of efficient EVCSs by comparing means of the inputs related to the groups classified by K-means clustering algorithm. This analysis presents that efficient EVCSs can be generally characterized with the high number of nearby EVCSs and low level of the traffic congestion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.9 s.240
• /
• pp.1065-1073
• /
• 2005

The thermal conductivity of water- and ethylene glycol-based nanofluids containing alumina $(Al_2O_3)$, zinc oxide (ZnO) and titanium dioxide $(TiO_2)$ nanoparticles is measured by varying the particle diameter and volume fraction. The transient hot-wire method using an anodized tantalum wire for electrical insulation is employed for the measurement. The experimental results show that nanofluids have substantially higher thermal conductivities than those of the base fluid and the ratio of thermal conductivity enhancement increases linearly with the volume fraction. It has been found that the ratio of thermal conductivity enhancement increases with decreasing particle size but no empirical or theoretical correlation can explain the particle-size dependence of the thermal conductivity. This work provides, for the first time to our knowledge, a set of consistent experimental data over a wide range of nanofluid conditions and can therefore serve as a basis for developing theoretical models to predict thermal conduction phenomena in nanofluids.

• IE interfaces
• /
• v.24 no.1
• /
• pp.40-50
• /
• 2011

We develop a nonlinear integer programming model which minimizes the total cost with the optimal number of operators to hire and their optimal allocation to the tasks under the diverse constraints such as the weekly, daily, and hourly maximum allowable abandonment rates for the time-varying inbound call volume. We present a case study based on actual data at a call center, in order to prove the validity of applying the optimization method proposed. By the one-sample two-tailed t-test, we confirm that the expected abandonment rates resulting from the optimization method are identical with the ones from the discrete-event simulation within specified confidence intervals.

• Journal of Environmental Science International
• /
• v.21 no.3
• /
• pp.277-287
• /
• 2012

The MFFn(Mass First Flush) was analyzed for various rainy events(monitoring data from 2008 to 2009) in Transportation area(Highway, National road, Trunk road). Estimated MFFn using SWMM was evaluated by comparison with observed MFFn. MFFn was estimated by varying n-value from 10% to 90% on the rainy events. The n-value increases, MFFn is closed to '1'. As time passed, the rainfall runoff was getting similar to ratio of pollutants accumulation. The result of a measure of the strength of the linear relationship between observed data and expected data under model was good ($R^2$=0.89). Pollutants runoff loads by volume showed Highway 26.6%, National road 44.8%, Trunk road 35.0% at the MFF20(20% by total runoff). A case of MFF30, pollutants runoff loads by volume showed Highway 40.2%, National road 54.3%, Trunk road 46.8%. According to the results, Initial precipitation basis were Highway MFF30, National road MFF20, Trunk road MFF30 when the Non-Point source control facilities set up.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.57-69
• /
• 1995

The development of a finite difference model for cross-shore sediment transport prediction in the surf tone due to the storm surge event is presented in this paper. Using the inhomogeneous diffusion equation with moving boundaries. the present numerical model is found to be robust and efficient and does not possess a number of restrictions imposed in Kriebel and Dean's(1985) numerical model. Our numerical model is validated through comparison with the analytical solution. the data of a large-scale experiment and the field data of Hurricane Eloise. The Present model if able to predict the averaged volumetric erosion rate of a beach due to the time-varying real storm surge hydrographs and satisfies the conservation of sediment between eroded volume in the onshore region and deposited volume in the offshore region. In addition. the present model is able to reasonably predict the recession of a beach with wide berm and dune. and can describe the change of a breaking point by the offshore deposition. From the sensitivity analysis or the present numerical model with various input parameters, it is concluded that the present numerical model is able to analyze the beach change in a reliable manner including the effects of different sizes of sediments.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.360-370
• /
• 2004

Adaptive mesh refinement(AMR) is one of the popular computational simulation techniques used in various scientific and engineering fields. Although AMR data is organized in a hierarchical multi-resolution data structure, traditional volume visualization algorithms such as ray-casting and splatting cannot handle the form without converting it to a sophisticated data structure. In this paper, we present a hierarchical multi-resolution splatting technique using k-d trees and octrees for AMR data that is suitable for implementation on the latest consumer PC graphics hardware. We describe a graphical user interface to set transfer function and viewing / rendering parameters interactively. Experimental results obtained on a general purpose PC equipped with an nVIDIA GeForce3 card are presented to demonstrate that the proposed techniques can interactively render AMR data(over 20 frames per second). Our scheme can easily be applied to parallel rendering of time-varying AMR data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.9-16
• /
• 2024

In this paper, we aimed to convert the fire curve in volume units to a fire curve per unit area for application in the Fire Dynamic Simulator (FDS) surface heat release rate method. The fire curve was expressed dimensionlessly considering the total combustion characteristic time, and improvements were made to represent the appropriate ratios for the growth , steady, and decay phases concerning the fire intensity. Additionally, a correction function for combustion characteristic time varying with mass increase was derived. Also to control the growth time values according to the increase in mass, a function to correct the growth phase ratio was derived. Consequently, utilizing existing data, a formula was established to determine the reference mass for combustion materials and predict the fire curve based on mass increase.