• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.597-600
• /
• 1999

By periodically varying the current density and etching time during anodic oxidation of crustalline silicon wafers in 15% HF-ethanol solution, we obtained porous silicon multilayers which have periodically varying refractive index. We fabricated the porous silicon microcavity (PSM) which consist of porous silicon multilayers (I), active layer of porous silicon, and porous silicon multilayers (II) and investigated its physical properties. The AFM (Atomic Force Microscope) measurement from the cross section of multilayers (I and II) shows uniformity of high refractive index and low index layers as well as the active layer. We observed the characteristics of Bragg reflector when the thickness of layers was 1/4 and the thickness of active layer was twice of the effective wavelength, which can be used as a filter for specific wavelength. We found the emission characteristic from the PSM, which FWHM (full width half maximum) was considerably decreased and emission intensity was increased.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2011

Traffic congestion is a source of significant economic and social costs in urban areas. Intelligent Transportation Systems (ITS) are a promising means to help alleviate congestion by utilizing advanced sensing, computing, and communication technologies. This paper proposes and investigates a basic and advanced ITS framework Advanced Traveler Information System (ATIS) using wireless Vehicle to Roadside (Centralized ATIS model: CA model) and Vehicle to Vehicle (DeCentralized ATIS model: DCA model) communication and assuming an ideal communication environment in the typical $6{\times}6$ urban grid traffic network. Results of this study indicate that an ATIS using wireless communication can save travel time given varying combinations of system characteristics: traffic flow, communication radio range, and penetration ratio. Also, all tested metrics of the CA and DCA models indicate that the system performance of both models is almost identical regardless of varying traffic demand and penetration ratios. Therefore, DCA model can be a reasonable alternative to the fixed infrastructure based ATIS model (CA model).

• Journal of Biosystems Engineering
• /
• v.17 no.1
• /
• pp.79-90
• /
• 1992

Viscoelastic characteristics of agricultural products may be determined through three basic tests ; stress relaxation, creep, and dynamic test. Considering the changeability of living materials, dynamic test in which information is derived in a relatively short time appears to be highly desirable, in which either cyclic stress or cyclic strain is imposed and the remaining quantity (strain or stress) is measured. The periodically varying stress will also result in periodically varying strain which in a viscoelastic material should theoretically be out of phase with the stress, because part of the energy subjected to sample is stored in the material as potential energy and part is dissipated as heat. This behavior results in a complex frequency-dependent compliance denoted by J($i{\omega}$). The complex compliance and therefore the storage compliance, the loss compliance, the phase angle, and percent energy loss for the sample should be obtainable with a given static viscoelastic property of the material under static load. The complex compliance of the rough rice kernel were computed from the Burger's model describing creep behavior of the material which were obtained in the previous study. Also, the effects of cyclic load and moisture content of grain on the dynamic viscoelastic behavior of the samples were analyized. The results obtained from this study were summarized as follows ; 1. The storage compliance of the rough rice kernel slightly decreased with the frequency applied but at above the frequency of 0.1 Hz it was nearly constant with the frequency, and the loss compliance of the sample very rapidly decreased with increase in the frequency on those frequency ranges. 2. It was shown that the storage compliance and the loss compliance of the sample increased with increase in grain moisture content. Effect of grain moisture content on the storage compliance of the sample was highly significant than effect of the frequency applied, but effect of the frequency on the loss compliance of the sample was more significant than effect of grain moisture content. 3. In low moisture content, the percent energy loss of Japonica-type rough rice was much higher than that of Indica-type rough rice, but, in high moisture content, vice versa.

• Smart Structures and Systems
• /
• v.21 no.3
• /
• pp.257-262
• /
• 2018

Vibrational problems in the domestic Small Horizontal Axis Wind Turbines (SHAWT) are due to flap wise vibrations caused by varying wind velocities acting perpendicular to its blade surface. It has been reported that monitoring the structural health of the turbine blades requires special attention as they are key elements of a wind power generation, and account for 15-20% of the total turbine cost. If this vibration problem is taken care, the SHAWT can be made as commercial success. In this work, Shape Memory Alloy (SMA) wires made of Nitinol (Ni-Ti) alloys are embedded into the Glass Fibre Reinforced Polymer (GFRP) wind turbine blade in order to reduce the flapwise vibrations. Experimental study of Nitinol (Ni-Ti) wire characteristics has been done and relationship between different parameters like current, displacement, time and temperature has been established. When the wind turbine blades are subjected to varying wind velocity, flapwise vibration occurs which has to be controlled continuously, otherwise the blade will be damaged due to the resonance. Therefore, in order to control these flapwise vibrations actively, a non-linear current controller unit was developed and fabricated, which provides actuation force required for active vibration control in smart blade. Experimental analysis was performed on conventional GFRP and smart blade, depicted a 20% increase in natural frequency and 20% reduction in amplitude of vibration. With addition of active vibration control unit, the smart blade showed 61% reduction in amplitude of vibration.

• Smart Structures and Systems
• /
• v.23 no.6
• /
• pp.641-651
• /
• 2019

The stochastic stability control of the parameter-excited vibration of an inclined stay cable with multiple modes coupling under random and periodic combined support disturbances is studied by using the direct eigenvalue analysis approach based on the response moment stability, Floquet theorem, Fourier series and matrix eigenvalue analysis. The differential equation with time-varying parameters for the transverse vibration of the inclined cable with control under random and deterministic support disturbances is derived and converted into the randomly and deterministically parameter-excited multi-degree-of-freedom vibration equations. As the stochastic stability of the parameter-excited vibration is mainly determined by the characteristics of perturbation moment, the differential equation with only deterministic parameters for the perturbation second moment is derived based on the $It{\hat{o}}$ stochastic differential rule. The stochastically and deterministically parameter-excited vibration stability is then determined by the deterministic parameter-varying response moment stability. Based on the Floquet theorem, expanding the periodic parameters of the perturbation moment equation and the periodic component of the characteristic perturbation moment expression into the Fourier series yields the eigenvalue equation which determines the perturbation moment behavior. Thus the stochastic stability of the parameter-excited cable vibration under the random and periodic combined support disturbances is determined directly by the matrix eigenvalues. The direct eigenvalue analysis approach is applicable to the stochastic stability of the control cable with multiple modes coupling under various periodic and/or random support disturbances. Numerical results illustrate that the multiple cable modes need to be considered for the stochastic stability of the parameter-excited cable vibration under the random and periodic support disturbances, and the increase of the control damping rather than control stiffness can greatly enhance the stochastic stability of the parameter-excited cable vibration including the frequency width increase of the periodic disturbance and the critical value increase of the random disturbance amplitude.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.635-641
• /
• 2010

Time-varying channel characteristics in OFDM systems over doubly selective channels cause inter-carrier interferences(ICI) in the frequency domain. Time domain windowing gives rise to restriction on the bandwidth of the frequency domain channel matrix and makes it possible to approximate the OFDM system as a simplified linear input-output model. When successive interference cancellation based on linear MMSE estimation is employed for channel equalization in OFDM systems, symbol detection ordering produces considerable effects on overall system performances. In this paper, we show the reduction of the residual ICI by time domain windowing and the resultant performance improvements, and investigate the effects of SINR- and CSEP-based symbol detection ordering on the performance of successive interference cancellation.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.922-932
• /
• 2020

Previous research has indicated that radish powder could be a suitable replacement for chemical nitrite sources in alternatively cured meat products. However, the effects of radish powder level on the physicochemical properties of cured meat have not been systematically studied. In this study, we aimed to investigate the effects of varying concentrations of radish powder and incubation time on the physicochemical properties and cured meat pigments of alternatively cured meat products. We divided our experimental setup into seven groups with different radish powder concentrations and incubation times: control (0.01% sodium nitrite), treatment 1 (0.15% radish powder and 2 h incubation), treatment 2 (0.15% radish powder and 4 h incubation), treatment 3 (0.30% radish powder and 2 h incubation), treatment 4 (0.30% radish powder and 4 h incubation), treatment 5 (0.30% celery powder and 2 h incubation), and treatment 6 (0.30% celery powder and 4 h incubation). The cooking yield, CIE a* values (redness), and total pigment levels were not significantly different (p > 0.05) between any of the alternatively cured treatments and the control. However, when 0.30% radish powder or celery powder was added to the products, the CIE b* values increased significantly (p < 0.05) with incubation time. At the same vegetable concentration, the nitrite content, nitrosyl hemochrome, and curing efficiency also increased significantly (p < 0.05) as the incubation time increased from 2 to 4 h, regardless of the types of vegetable powder. Among the meat products cured with radish powder, treatment 4 showed the highest increase in residual nitrite content, nitrosyl hemochrome content, and curing efficiency, but showed decreased lipid oxidation. Our results suggest that increased concentrations of radish powder and longer incubation times would be more suitable for producing alternatively cured meat products comparable to traditionally cured products treated with synthetic nitrite.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.1
• /
• pp.143-148
• /
• 2012

This study evaluated the quality characteristics of white birch (Betula platyphylla var. japonica) sap with different collection times. The changes of browning index, turbidity, pH, total acidity, organic acid, free sugar, crude protein, crude ash, and mineral content were investigated. The browning index and turbidity increased from 0.076 to 0.222 and from 0.048 to 0.138, respectively, with increasing collection time. The pH decreased from 6.09 to 4.72, while total acidity increased with increasing collection time. Citric and malic acids were detected and malic acid increased with increasing collection time. Glucose and fructose as free sugars were detected and their contents were 0.364~0.433% and 0.497~0.664%, respectively. Crude protein and crude ash contents remarkably increased from 3.40 to 32.37 mg% and from 0.01% to 0.04%, respectively, with increasing collection time. Cu, Fe, Ca, Mg, Mn, and K were detected, and increased with increasing collection time. Particularly, K increased remarkably from 5.25 to 37.27 mg/L over time. These results indicate that the optimum processing method to improve the quality of white birch sap is necessary, because the quality of sap decreased as collection time increased, but nutritional value increased.

• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1127-1134
• /
• 2002

The effects of pressure and temperature on the autoignition of propane and n-butane blends were investigated using a rapid compression machine (RCM) , which is widely used to examine the autoignition characteristics. The RCM was designed to be capable of varying the compression ratio between 5 and 20 and minimize the vortex formation on the cylinder wall using a wedge-shaped crevice. The initial temperature and pressure of the compressed gas were varied in range of 720∼900 K and 1.6∼ 1.8 MPa, respectively, by adjusting the ratio of the specific heat of the mixture by altering the ratio of the non-reactive components (N$_2$, Ar) under a constant effective equivalence ratio (ø$\_$f/= 1.0) The gas temperature after the compression stroke could be obtained from the measured time-pressure record. The results showed a two-stage ignition delay and a Negative Temperature Coefficient (NTC) behavior which were the unique characteristic of the alkane series fuels. As the propane concentration in the blend were increased from 20% and 40% propane, the autoignition delay time increased by approximately 41 % and 55% at 750 K. Numerical reduced kinetic modeling was performed using the Shell model, which introduced some important chemical ideas, represented by the generic species. Several rate coefficients were calibrated based on the experimental results to establish an autoignition model of the propane and n-butane blends. These coefficients can be used to predict the autoignition characteristics in LPG fueled Sl engines.

• Korean Journal of Animal Reproduction
• /
• v.7 no.2
• /
• pp.72-85
• /
• 1983

This presentation firstly is discussed the characteristics of estrus, the time of first postpartum estrus, and the relative accurate of various estrus detection aids and secondly discussed the abnormalities of estrus and ovarian function and its control by treatment of exogenous hormones in cattle and pig. Longer estrus cycles as well as the shorter than 18 day cycles showed the lowered conception rates as compared to the normal cycles of 18 to 25 days. Other characteristics of est겨s such as duration of estrus, intensity of estrus and time of estrus are reviewed to affect fertility. The first postpartum ovulation and estrus in cows usually occurs about 20 to 30 days and 40 to 50 days after parturition, respectively. Irregularities in estrus cycle length have been conducted during early postpartum period. In sows, weaning is followed by ovulation and estrus although there is some individual variation. The most common method of estrus detection is direct visual observation on standing estrus behavior, but various aids of estrus detection have been empolyed with varying degree of effectiveness. The results from heat detector devices are about as accurate as twice-daily observation(about 90%). The abnormal estrus can be classified into three types; irregular or continuous estrus, silent estrus and anestrus. Cystic ovarian disease, follicular cysts and luteal cysts, is a serious cause of reproductive failure in cattle and pig. The follicular cysts are much more common than luteal cysts and the incidence of ovarian cysts in dairy cattle is higher than beef cattle and pig. The occurrences of ovarian cysts have been closely associated with levels of milk production, stages of postpartum period, nutritional levels and seasons. The luteal cysts and persistent corpora lutea are responsive to the luteolytic effects of the recently synthetic analogues of PGF2$\alpha$ in cows and sows and recently GnRH or LH-RH has been successfully used as a treatment for cows and sows with ovarian follicular cysts.