• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2143-2145
• /
• 2005

Power semicondcutor인 IGBT MOSFET, GTO, SI-Thyristor등은 높은 스위치 신뢰성과 life time, 그리고 fast repetition rate 등을 지니고 있기 때문에 medium/High voltage영역에서 스위치 사용이 대두되어 왔으나, Thyratron이나 Trigatron(Gap switch)와 비교하여 낮은 전압/전류를 스위칭하기 때문에 전통적으로 직렬연결을 통해 high voltage 영역의 스위치로 사용되어 왔다. 하지만, 직렬연결되어 있는 각각의 power semiconductor와 gate driving circuit의 on/off synchronization이 맞지 않기 때문에 부하의 급격한 변화에 따른 전압의 balance에 문제가 가장 심각하게 대두되어 왔다. 이러한 문제를 해결하기 위해서 gate driving circuit에서 제어를 해주는 방법과 power semiconductor에서 제어를 해주는 방법이 있으나 두 방식 모두 문제점이 있다. 본 논문에서는 기존의 zener clamping방식에서 벗어나 새로운 active clamping방식의 직렬연결을 제안했으며 시뮬레이션과 실험을 통해 나타난 이 결과들은 on/off transient 시 symmetry를 유지하는데 효과적이라는 것을 보여주고 있다.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.720-723
• /
• 1996

The recent summer power peak crisis has been caused by excessive use of cooling loads at daily peak time in summer. The yearly load shape of KEPCO has gradually became very steep valley. Under this situation, more efficient DSM(Demand Side Management) tools are fully required for summer peak clipping and shaving. In this paper, the KEPCO's Jeju-Do model project for DSM, especially for Demand Controller, is presented. Demand Controller was evaluated to have the very high economical efficiency against the investment in equipment, as compared with another DSM tools. There were some serious problem to apply Demand Controller to many customers in the aspect to synchronization with KEPCO's watthour meter. But these problems have solved by Keyin's new Demand Controller using vision algorithm.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2301-2303
• /
• 2003

A steam turnine in thermal/nuclear power plant drives generator and maintains it at rated speed using high temperature and high pressure steam energy. After synchronization in parallel with the power system, generator output increases according as the governor, that is the controller, increases steam flow into turbine. By the way, as the steam flow into turbine can not be reduced fast even though the electrical load is lost, the turbine gets into dangerous situation due to the increase of its speed. At this time, the duty of the turbine governor is to limit the speed to its overspeed trip setpoint by stopping the steam flow as soon as possible, the test of which is called load rejection test. It is introduced in this paper for a simulation test of generator load rejection to be implemented on the turbine governor in a 600MW nuclear power plant before its startup.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.520-522
• /
• 2004

분산 감시 제어 시스템은 산업분야에서 중요한 부분이다. 그러나 일반적인 분산 감시 제어 시스템의 응용 소프트웨어간이나 감시 장비간의 또는 응용 소프트웨어와 감시 장비간의 통신이 필요하다. 이러한 문제점은 통신의 과부하로 이어질 수 있다. 본 논문에서는 이러한 문제점을 해결하고 대규모 분산 감시 제어 시스템에서 사용할 수 있는 개발 환경을 제안한다. 이 시스템은 분산 시스템에서 정보를 동기화 하여 분산 환경하의 모든 응용 소프트웨어나 감시 장비가 공유 할 수 있도록 하는 정보 동기화 기술로 이루어져 있다 이 기술은 공유메모리를 사용하여 프로그램 코드와 데이터 구조를 분리하여 데이터 구조 및 데이터 값을 공유할 수 있게 하는 SDSL(Shared Data Structure Library)기법을 사용한다. 그리고 적시성을 보장해 주는 미들웨어인 TMO(Time-triggered Message-triggered Object)를 이용하여 실시간 성을 보장해 주는 한편 통신을 가능하게 해줌으로써 분산 시스템에서도 적용할 수 있다. 본 논문에서 제안하는 개발 환경은 데이터 구조를 동적으로 변화시켜주면서 대규모 분산 감시 제어 시스템에서 응용 프로그램을 보다 편하게 구현하고자 하는 산업 분야에 적용할 수 있다.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2903-2913
• /
• 1997

This paper describes the design and implementation of the ParaC language that supports parallel programming on the shared memory and distributed memory parallel machine. The ParaC language is designed for the effective use of system resources of scalable parallel systems. The goal is achieved by adding parallel and synchronization constructs for shared address spaces, and remote task constructs for distributed address spaces. This paper also shows the translation method, and we implement the translator and the run-time library for parallel execution of extended constructs.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1605-1606
• /
• 2007

An electrical generator in power plant is driven and maintained its speed at rated by steam turbine. By the way, after synchronization in parallel with the power system, as the steam flow into turbine can not be reduced fast even though the electrical load is lost, the turbine gets into dangerous situation due to the increase of its speed. At this time, the duty of the turbine governor is to limit the speed to its overspeed trip set point by stopping the steam flow as soon as possible, the test of which is called load rejection test. It is introduced in this paper for a field simulation test of generator load rejection to be implemented on the turbine governor in a 680MW nuclear power plant before its startup.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.80-88
• /
• 2006

This paper proposes a new steel strip surface inspection system. The system acquires bright and dark field images of defects by using a stroboscopic IR LED illuminator and area camera system and the defect images are preprocessed and segmented in real time for feature extraction. 4113 defect samples of hot rolled steel strip are used to develop KNN (k- Nearest Neighbor) classifier which classifies the defects into 8 different types. The developed KNN classifier demonstrates about 85% classifying performance which is considered very plausible result.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.124-129
• /
• 2004

Recently, the demand for the optical cable is rapidly growing because the number of internee user increases and high speed internet data transmission is required. But the present optical cable winding systems has some serious problems such as pile-up and collapse of cable usually near the flange of the bobbin in the process of the cable winding. To reduce the pile-up collapse in a cable winding systems, a new guiding system is developed for a high-speed self-align cable winding. First of all, the winding mechanism was analyzed and synchronization logics for the motions of winding, traversing, and the guiding were created. A prototype cable winding systems was manufactured to validate the new guiding system and the suggested logic. Experiment results showed that the winding system with the developed guiding system outperformed the system without the guiding system in reducing pile-up and collapse in the high-speed winding.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.379-383
• /
• 2005

This paper proposes a new steel strip surface inspection system. The system acquires bright and dark field images of defects by using a stroboscopic IR LED light and area camera system and the defect images are preprocessed and segmented in real time for feature extraction. 4113 defect samples of cold roll steel strips are used to develop KNN (k-Nearest Neighbor) classifier which classifies the defects into 8 different types. The developed KNN classifier demonstrates about 85% classifying performance which is considered very plausible result.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2010

An integrated type fire alarm control panel which is for the purpose of the ubiquitous environment application is reported. For the ubiquitous environments, mainly three additional functions upon its inherent capabilities are implemented. That is, wireless technology with ZigBee capability is applied for the interface of ZigBee detectors. Camera images can be displayed in the fire alarm control panel in which images are transferred via ethernet. For the time synchronization of the distributed fire alarm control panel, GPS module is introduced and implemented in the system.