• Smart Structures and Systems
• /
• v.3 no.3
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.2
• /
• pp.33-43
• /
• 1993

Lock mechanism is essential for synchronization on the multiprocessor systems. Lock mechanism needs to reduce the time for lock operation in low lock contention. Lock mechanism must consider the case of the high lock contention. The conventional lock control scheme in memory results in the increase of bus traffic and memory utilization in lock operation. This paper suggests a lock scheme which stores the lock data in cache and manages it efficiently to reduce the time spent in lock operation when the lock contention is low on a multiprocessor system built on HiPi-bus(Highly Pipelined bus). This paper also presents the design of the HIPi-CLOCK (Highly Pipelined bus Cache LOCK mechanism) which transfere the data from on cache to another when the lock contention is high. The designed simulator compares the conventional lock scheme which controls the lock in memory with the suggested HiPi-CLOCK scheme in terms of the RMW(Read-Modify-Write) operation time using simulated trace. It is shown that the suggested lock control scheme performance is over twice than that of the conventional method in low lock contention. When the lock contention is high, the performance of the suggested scheme increases as the number of the shared lock data increases.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.647-649
• /
• 2013

This paper is the study of effective recovery system in the android set-top box, using NTP (Network Time Protocol). Because of Response to the user react quickly in case of a set-top box, needs compared to other electronic products, set-top box is one of always powered features to work at home. But general-purpose OS such as Android-based set-top box have to reset for cache & main memory initialization. In this paper, we introduce system reset & recovery by NTP client utilizing.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.5
• /
• pp.1204-1215
• /
• 1998

In this paper, we propose a scenario representing method, a specification language, and a verification technique for OARTS(Object based Approach for Real-Time Systems). As well as the general modeling method(event trace diagram), this study includes a specification language and a verification technique because there was no study about methodological level technique for scenario development as yet. Centering around the synchronization problem of transition of external modules which are the communication interfaces based on the objects, we lay stress on the representation of sequence of external events and internal action transitions. From the results of practical experiences, it has been ascertained that the proposed method reflect well the requirements in the analysis step, and its validity of the representation has been identified by a conceptual verifier. We support that it can serve as an analyzing tool for representing a general real-time scenarios also.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.9
• /
• pp.4271-4294
• /
• 2018

Communication cost is the most important factor in Wireless Sensor Networks (WSNs), as exchanging control keying messages consumes a large amount of energy from the constituent sensor nodes. Time-based Dynamic Keying and En-Route Filtering (TICK) can reduce the communication costs by utilizing local time values of the en-route nodes to generate one-time dynamic keys that are used to encrypt reports in a manner that further avoids the regular keying or re-keying of messages. Although TICK is more energy efficient, it employs no re-encryption operation strategy that cannot determine whether a healthy report might be considered as malicious if the clock drift between the source node and the forwarding node is too large. Secure SOurce-BAsed Loose Synchronization (SOBAS) employs a selective encryption en-route in which fixed nodes are selected to re-encrypt the data. Therefore, the selection of encryption nodes is non-adaptive, and the dynamic network conditions (i.e., The residual energy of en-route nodes, hop count, and false positive rate) are also not focused in SOBAS. We propose an energy efficient selection of re-encryption nodes based on fuzzy logic. Simulation results indicate that the proposed method achieves better energy conservation at the en-route nodes along the path when compared to TICK and SOBAS.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.446-455
• /
• 2001

In this paper, the precise synchronized clock generator using GPS receiver is presented. The GPS receiver provides a synchronized IPPS signal which guaranties a reliable standard time mark. This signal allows us to do time synchronization and correct the time step. We designed and implemented the precise synchronized clock generator based on DPLL in order to generate a high-resolution clock from a low-cost inaccurate oscillator with ALTERA FLEX EPM6016TC144-3. We also implemented a hardware unit and proved that the unit provides 1MHz clock output which had a high resolution and accuracy when it was combined with GPS receiver.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.170-177
• /
• 2011

This paper proposes a telemetering method that transmits the real-time data together with the time-delayed data and that merges both data after flight test. The method can minimize the error data which occur in the communication environment affected by the multipath fading and transmit antenna pattern when telemetry data are received during the flight test. This method was applied to the design of the telemetry unit and the development of data merging program. By merging the resulting data of flight test and analyzing synchronization errors, its efficiency for the telemetry link is verified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.358-363
• /
• 2019

If the EOIR equipment mounted on an unmanned aircraft transmits images and receives commands through a data link, there may be delays in data transmission depending on the transmission path of the data and the conditions of the ground equipment or wireless network. This increases the possibility of initial target LOCK-ON failure due to the difference between the time when the received image is viewed and the time when the image is taken. Therefore, this paper proposed a way to use frame indexes to synchronize with images, and to increase the success of target tracking by adding frame indexes to commands from the ground station.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.9-14
• /
• 2006

Galileo is the European Global Navigation Satellite System, under civilian control, and consists on a constellation of medium Earth orbit satellites and its associated ground infrastructure. Galileo will provide to their users highly accurate global positioning services and their associated integrity information. The elements in charge of the computation of Galileo navigation and integrity information are the OSPF (Orbit Synchronization Processing Facility) and IPF (Integrity Processing Facility), within the Galileo Ground Mission Segment (GMS). Navigation algorithms play a key role in the provision of the Galileo Mission, since they are responsible for computing the essential information the users need to calculate their position: the satellite ephemeris and clock offsets. Such information is generated in the Galileo Ground Mission Segment and broadcast by the satellites within the navigation signal, together with the expected a-priori accuracy (SISA: Signal-In-Space Accuracy), which is the parameter that in fault-free conditions makes the overbounding the predicted ephemeris and clock model errors for the Worst User Location. In parallel, the integrity algorithms of the GMS are responsible of providing a real-time monitoring of the satellite status with timely alarm messages in case of failures. The accuracy of the integrity monitoring system is characterized by the SISMA (Signal In Space Monitoring Accuracy), which is also broadcast to the users through the integrity message.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.145-147
• /
• 2010

This study is the visually emotional identification lighting for easy to distinguish using 3colors LED on AtoN facility in shore and harbor, which have realized a controller for certainly express the mouth of a harbor by red light and green light of both sides a harbor and for synchronization at a time of right and left or serial sequential the harbor guidance light through synchronizer or timer by GPS. There is expectation effect that is prevent a confusion about distinguish of facility by ship's operator and to beautify a night scene of harbor, which is expressed to emotional identification lighting differ from great many lighting of harbor with variable color lighting the lighthouse body and vertical layer color lighting using LED. The function of AtoN is adapted that guidance light through synchronization or serial sequential lighting and display of harbor safety message by CW lighting, and this system is the power consumption greatly reduce by candle alternated high light LED.