• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.581-590
• /
• 2003

This paper proposes the routing path selection mechanism for source routing-based PtMP (Point-to-Multipoint) call in ATM switching system. Especially, it suggests PtMP routing path selection method that can share the maximum resource prior to the optimal path selection, guarantee the reduction of path calculation time and cycle prevention. The searching for the nearest branch point from destination node to make the maximum share of resource is the purpose of this algorithm. Therefore among neighbor nodes from destination node by back-tracking, this algorithm fixes the node crossing first the node on existing path having the same Call ID as branch node, constructs the optimal PtMP routing path. The optimal node to be selected by back-tracking is selected by the use of Dijkstra algorithm. That is to say, PtMP routing path selection performs the step of cross node selection among neighboring nodes by back-tracking and the step of optimal node selection(optimal path calculation) among neighboring nodes by back-tracking. This technique reduces the process of search of routing information table for path selection and path calculation, also solves the cycle prevention easily during path establishment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.926-934
• /
• 2016

In this paper, we designed a compact frequency synthesizer with multi-function for Ka-band seeker. DDS(Direct Digital Synthesizer) is applied to generate various waveform and to cover high-speed frequency sweep. In order to reduce size, waveform generator and frequency up-converter are integrated in one module. Proposed frequency synthesizer provides precise detection and tracking waveform for low and high speed targets. It is observed that fabricated synthesizer performs $0.45{\mu}sec$ frequency switching time and -93.69 dBc/Hz phase noise at offset 1 kHz. The size of the synthesizer is kept within 120 mm width, 120 mm length and 22 mm height.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.397-404
• /
• 2011

In this research, wish to suggest method to embody system that can accommodate defect of PLC and find actual propriety. Defect permission control system minimizes production damage because enables repair and checking without discontinuance and improve believability about whole system. Propose duplexing of system to embody this fault tolerant system. Therefore, composed control system that can permit defect or breakdown duplexings of various module proposing this system, and confirms to simulation and actuality kiln of defect permission control system through an application experiment, and compares for mean time between defect by estimate and defect special quality and system configuration of failure(failure) to improve believability of PLC control system together. In proposed system expression method and system mode and relation with operation mode, error discovery mode and switching tube of duplexing mode, and PLC's central processing unit of node study algorithm about master-standby conversion driving and continuous operation of 2 channels method that have 2 that is not one and deduced continuous operation method and result about defect permission in this algorithm and applies this result to actuality kiln control system and confirms continuous operation about PLC defect permission.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.465-468
• /
• 2005

MMA(Multi-Modulus Algorithm) is inferior at a initial equalization in high ISI(intersymbol interference), because it is the inaccurate decision. To improve this probel SMMA(Sliced Multi-Modulus Algorithm) is based on using the MCMA(Modified Constant Modulus Algorithm). SMMA is a improved capability than MMA in high SNR but is inaccurate decision in low SNR. In this paper, We propose some multi-modulus blind equalization algorithm scheme. It is a method of operation in some multi-modulus algorithm which does no obstruct a convergence property at the initial equalization in the low SNR. Proposed algorithm improves the steady-state performance. And it uses residual ISI of the equalizer output in order to decide the optimum switching time between the single modulus and the multi-modulus algorithm.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.141-144
• /
• 2006

The deviations in the injection orbital parameters, resulting from launcher dispersions, need to be estimated and used for autonomous satellite operations. For the proposed small satellite mission of the university there will be two GPS receivers onboard the satellite to provide the instantaneous orbital state to the onboard data handling system. In order to meet the power requirements, the satellite will be sun-tracking whenever there is no imaging operation. For imaging activities, the satellite will be maneuvered to nadir-pointing mode. Due to such different modes of orientation the geometry for the GPS receivers will not be favorable at all times and there will be instances of poor geometry resulting in no output from the GPS receivers. Onboard the satellite, the orbital information should be continuously available for autonomous switching on/off of various subsystems. The paper presents the strategies to make use of small arcs of data from GPS receivers to compute the mean orbital parameters and use the updated orbital parameters to calculate the position and velocity whenever the same is not available from GPS receiver. Thus the navigation message from the GPS receiver, namely the position vector in Earth-Centered-Earth-Fixed (ECEF) frame, is used as measurements. As for estimation, two techniques - (1) batch least squares method, and (2) Kalman Filter method are used for orbit estimation (in real time). The performance of the onboard orbit estimation has been assessed based on hardware based multi-channel GPS Signal simulator. The results indicate good converge even with short arcs of data as the GPS navigation data are generally very accurate and the data rate is also fast (typically 1Hz).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.65-73
• /
• 2002

This paper proposes a new carrier-based PWM method to solve the most serious problem of flying capacitor multi-level inverter that is the unbalance of capacitor voltages. The voltage unbalance occurs due to the difference of each capacitor's charging and discharging time applied to Flying Capacitor Inverter. New solution controls the variation of capacitor voltages into the mean '0'during some period by means of new carriers using the leg voltage redundancy in the flying capacitor inverter. The solution can be easily expanded to the multi-level inverter. The leg voltage redundancy in the new method makes the switching loss of device equals to the conduction loss of device. This paper will examine the unbalance of capacitor voltage and the conventional theory of self-balance using Phase-shifted carrier. And then the new method that is suitable to the flying capacitor inverter will be explained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.298-305
• /
• 2003

In this paper, we proposed a high performance lookup controller for IP packet forwarding engine of ATM based label edge routers. The lookup controller is designed to provide services such as MPLS, VPN, ELL, and RT services as well as the best effort. For high speed searching for IP addresses, we employed a TCAM based hardware search device not using traditional algorithmic approaches. We also implement lookup control functions into FPGA for fast processing of packet header and lookup control. The proposed lookup controller is designed to support differenciated services for users and to process in pipelined mechanism for performance improvement. A two-step search scheme is also applied to perform lookup for the key combined with multi-field of packet header. We found that the proposed lookup controller provides the performance of about 16M packets per second through simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1426-1437
• /
• 1999

The introduction of fast packet switching networks such as the ATM leads to the possibility of video services with constant quality. However, the fixed traffic descriptor(TD), which is defined by ATM Forum and ITU-T, can not simultaneously satisfy network efficiency and video quality. This paper presents fast resource reallocation protocol (FRRP) which can provide an effective compromise between network efficiency and video quality. This protocol reallocates the network resources and then adapts the traffic to the reallocated resources. In the proposed method, a video session is divided into several time-intervals according to its generated traffic and TD is calculated which well characterizes the traffic during the specific subdivided interval. In addition, a system model, where MPEG coding algorithm and network control are unified, is proposal and the performance of the FRRP in terms of cell loss rate(CLR) is evaluated though the simulation using real video traffic(Star Wars). Simulation results show that the FRRP has only 5 ~35% CLR of the fixed TD.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.212-214
• /
• 2004

In this study, we fabricated the organic thin film by self-assembly method by using nitro-group and methoxy-group organic molecule. Also, we selected the organic single molecule in organic thin film and measured current-voltage characteristics by using scanning tunneling microscopy. The Organic molecules that use in an experiment is 4,4'-(diethynylphenyl)-2'-nitro-1-benzen ethiol and 4-[2,5-dimethoxy-4-ph enylethynylphenyl]ethynylphenylethanthiol. 4,4'-(dimet hynylphenyl)-2'-nitro-1-benzenethiol is applied widely in molecular electronic device and 4-[2,5-dime thoxy-4-phenylethynylphenyl]ethynylphenylethanthiol composed in Korea Research Institute of Chemical Technology. To be confirmed the formation of the self-assembled monolayers, we observed the real time frequency shift of the QCM and investigated surface of the self-assembled monolayers the using STM. With this, we measured current to the organic single molecule, in condition of the air state. As a result, we confirmed in constant voltage that properties of negative differential resistance. Using properties of negative differential resistance to get from this study, application is expected to be molecular switching device, memory device and logic device.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.328-339
• /
• 2006

In this paper the characteristic analysis of a single-phase switched reluctance motor (SRM) drive system with power factor correction (PFC) circuit is presented. The SRM is a low cost, simple and has a good high speed performance. The SRM drive with diode rectifier and filter capacitor has a low power factor because of short switch on time of capacitor. A novel switching topologic is presented to improve power factor and reduce torque ripple based on analysis of PFC circuit. Accordingly the SRM drive system with PFC circuit is also presented. Through the numerical analysis of the system, the toque ripple, power factor and efficiency with the change of rotary speed, load torque and capacity of the capacitor are achieved and compared with actual measured value.