• Journal of the Korean Institute of Educational Facilities
• /
• v.19 no.2
• /
• pp.41-50
• /
• 2012

This study aims to analyze chlidcare philosophy and the architectural characteristics of communal childcare cooperative nurseries(parent cooperative childcare facilities), and also to examine their mutual relationship. The communal childcare cooperative is an ideal childcare method to break away from employee-supported childcare system and cooperatively solve childcare problems in the family community system. The child-rearing philosophy of the communal childcare can bring spontaneous and creative development amidst 'daily life' and 'play' by switching from knowledge and skill-oriented education and puts an emphasis on physical environments in child's growth. The features of architecture related the childcare philosophy derived from this study are as follows: the way of participation and self-help, the extension of spatial scope and focuses on outside space, architecture of house-like residence rather than educational facility, spatial 'overlapping' focusing on transitional space and multi-purpose space rather than spatial partitions, the pursuit of creativity through play is realized in the incompletion and unspecification of space evolving over time.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.255-261
• /
• 2012

Since PV PCS uses output current sensor for ac output current control, the sensor's sensing value includes unnecessary offset inevitably. If PV inverter is controlled by the included offset value, it's output current will generate DC offset. The DC offset of output current for trans-less PV inverter is fatal to grid, which results in saturating grid side transformer. Usually DSP controller of PV inverter reads several times sensing value during initial operation and, finally, it's average value is used for offset calibration. However, if temperature changes, the offset changes, too. And also, the switch device is not ideal, both each switching element of the voltage drop difference and on & off time delay difference generate DC offset. Thus, to compensate for deadtime and the switch voltage drop, feedback control by output current DC offset should be provided to compensate additional distortion of the output current. The validity of the proposed method is confirmed through PSIM simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1550-1559
• /
• 2013

Light emitting diode(LED) lighting has been applied various industry fields because of its high efficiency, low power consumption, long life time, and environment friendly characteristics. Generally, LED lighting needs a driver to maintain constant current. Most popular driver is the switching converter. In the converter, there are several electrolytic capacitors. However the lifespan of the electrolytic capacitor is much shorter than LED. Therefore the lifespan of LED lighting with electrolytic capacitor is decreased. Also, LED lighting needs dimming control because of various needs and energy saving. This paper presents the dimmable single-stage PFC DCM flyback converter without electrolytic capacitor and parallel LC resonant filter for reducing 120[Hz] ripple on the output. The type 2 controller is used to maintain constant current and the analog dimming control is used. The proposed converter is verified through simulation and experimental works.

• ETRI Journal
• /
• v.21 no.2
• /
• pp.31-39
• /
• 1999

Given two sorted lists A=(a0, a1, ${\cdots}$,a${\ell}$-1}) and B=(b0, b1, ${\cdots}$, bm-1), we are to merge these two lists into a sorted list C=(c0,c1, ${\cdots}$, cn-1), where n=${\ell}$+m. Since this is a fundamental problem useful to solve many problems such as sorting and graph problems, there have been many efficient parallel algorithms for this problem. But these algorithms cannot be performed efficiently in the postal model since the communication latency ${\lambda}$, which is of prime importance in this model, is not needed to be considered for those algorithms. Hence, in this paper we propose an efficient merge algorithm in this model that runs in $$2{\lambda}{\frac{{\log}n}{{\log}({\lambda}+1)}}+{\lambda}-1$$ time by using a new property of the bitonic sequence which is crucial to our algorithm. We also show that our algorithm is near-optimal by proving that the lower bound of this problem in the postal model is $f_{\lambda}({\frac{n}{2}})$, where $${\lambda}{\frac{{\log}n-{\log}2}{{\log}([{\lambda}]+1)}{\le}f_{\lambda}({\frac{n}{2}}){\le}2{\lambda}+2{\lambda}{\frac{{\log}n-{\log}2}{{\log}([{\lambda}]+1)}}$$.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.1-5
• /
• 2020

The leakage accident from a storage tank in an oil refinery plant occurred in April 2014 and the total loss is KRW 18 billion. This accident has prompted many companies to develop their own mitigation system to minimize the loss of the leakage accident. The aim of this study is to design the temporary storage facility system for dealing with leakage accidents. The basic concept of this system is that the leakage fluid of a hazardous material flows into a temporary storage tank and this is transferred to a spare tank by a pump as avoiding the overflow of a temporary storage tank. In order to design this system, the leakage velocity and quantity according to time series should be evaluated. In addition, a proper pump capacity should be determined to avoid repeating the pump switching on and off frequently. In this study, the benzene tank is selected to verify the efficacy of this system. This study can play a critical role to provide a guideline for designing a new system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.89-101
• /
• 2006

Frequency-variant transmission line parameters are determined. Then the signal transient characterizations of frequency-dependent multi-coupled lines are investigated. With the proposed method, an accurate signal integrity degradation such as signal ringing (overshoot, undershoot) and crosstalk noises relevant to the switching patterns of signals, rising / falling time(tr, tf) and line lengths is investigated. It is shown that there may be approximately 26% discrepancy of signal transients and 260% difference of crosstalk noises between the constant RLC model and frequency-variant RLC model in on-chip global interconnects while those of package lines are 11% and 70%, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.53-59
• /
• 2012

Smart phones are very convenient for communication, but you need to not to forget to change to silent mode when you go to church or cinema. Many people used to forget changing their cell phones to silent mode. In this paper, we have developed an android smart phone app. for automatic changing silent mode, which exploited smart phones' GPS and computing capability. According to the GPS location data and time, this app. will automatically change a cell phone to silent mode. We believe that this app. would provide us a lot of convenience.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.151-160
• /
• 2017

This paper presents a new technique of reference current generator based on Kalman filter (KF) estimator for three-phase shunt active power filter (APF). The stationary reference frame (d-q algorithm) is used to transform the load currents into DC component. The harmonics of load currents are extracted and the three-phase reference currents are generated using KF estimator. The work is simulated using Matlab/Simulink platform. To validate the simulation results, an experimental test-rig have been perform using real-time control dSPACE DS1104. In addition, hysteresis current control was used to generate the switching signal for the correction of the harmonics in the system. The non-linear load were constructed with three-phase rectifier which connected in series with inductor and parallel with resistor and capacitor. The results shows that the new technique of shunt APF embedded with KF is proven to eliminate the harmonics created by the non-linear load with some improvement on the total harmonics distortion (THD).

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1207-1216
• /
• 2015

In order to suppress the low frequency oscillation of the neutral-point voltage for three-level inverters, this paper proposes a new discontinuous pulse width modulation (DPWM) control method. The conventional sinusoidal pulse width modulation (SPWM) control has no effect on balancing the neutral-point voltage. Based on the basic control principle of DPWM, the relationship between the reference space voltage vector and the neutral-point current is analyzed. The proposed method suppresses the low frequency oscillation of the neutral-point voltage by keeping the switches of a certain phase no switching in one carrier cycle. So the operating time of the positive and negative small vectors is equal. Comparing with the conventional SPWM control method, the proposed DPWM control method suppresses the low frequency oscillation of the neutral-point voltage, decreases the output waveform harmonics, and increases both the output waveform quality and the system efficiency. An experiment has been realized by a neutral-point clamped (NPC) three-level inverter prototype based on STM32F407-CPLD. The experimental results verify the correctness of the theoretical analysis and the effectiveness of the proposed DPWM method.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.7
• /
• pp.489-494
• /
• 2009

Since multimedia content is often independently encoded into multiple variations having diverse bandwidths, resolutions and compression formats, the same segment might be stored at different temporal positions within the variations. In this paper, we present a durable multimedia bookmark mechanism which provides a convenient way of switching to any variation before or during playback of the multimedia content, without experiencing temporal discontinuity or overlapping a portion of the content. We also present a new multimedia bookmark player with which users can manage a personal collection of bookmarks with an intuitive visual interface.