• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.33-37
• /
• 2014

This paper introduces homogeneous liquid crystal (LC) orientations on chemically modulated polystyrene (PS) surfaces using various ion beam (IB) exposure time. Transparent PS was replaced with conventional polyimide material. As a non-contact process, IB bombardment process induced LC orientation in the direction parallel to the IB process. Through x-ray photoelectron spectroscopy, it was shown that the chemical compositional changes of the IB-irradiated PS surfaces were determined as a function of IB exposure time.Using this analysis, the optimal IB bombardment condition was determined at IB exposure time of up to 15 s. Moreover, thermal stability on IB-irradiated PS surfaces were carried out which showed that a relatively high IB exposure time induced a thermally stable LC alignment property.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.300-312
• /
• 2000

The application areas of embedded real-time systems are very wide and so are the requirements for real-time processing and reliability of the systems. To develop embedded real-time systems effectively with its real-time and reliability properties guaranteed, an appropriate real-time model is needed. Recently, the research on real-time object-oriented model is active, which graft the concept of object-orientation on real-time systems modeling and development. In this paper, we propose dRTO (dependable Real-Time Object) model, with 5 primitive classes. These allow designers to effectively model the characteristics of real-time systems, i.e., object-orientation, real-time-ness and dependability. The dRTO model has three main features. First, it is able to model and implement the timing constraints imposed on real-time objects as well as interactions among the objects. Second, hardware and software components (including kernel) of embedded systems can be modeled in one frame. Third, it is able to represent fault detection and recovery mechanisms explicitly.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.4
• /
• pp.321-330
• /
• 1999

Automation of observation and positioning of fiducial marks is made possible with the application of image matching technique, developed through the cooperative research effort of computer vision and digital photogrammetry. The major problem in such automation effort is to minimize the computing time and to increase the positional accuracy. Except for scanning and ground control surveying, the interior orientation process was automated in this study, through the development of an algorithm which applies the image matching and image processing techniques. The developed system was applied to close-range photogrammetry and the analysis of the results showed 54% improvement in processing time. For fiducial mark observation during interior orientation, the Laplacian of Gaussian transformation and the Hough transformation were applied to determine the accurate position of the center point, and the correlation matching and the least squares matching method were then applied to improve the accuracy of automated observation of fiducial marks. Image pyramid concept was applied to reduce the computing time of automated positioning of fiducial mark.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.293-300
• /
• 2023

The Shape Preferred Orientation (SPO) method has been used to analyze the orientation of fault motion, which is utilized as basic data for fault kinematics studies. The rigid grains, which as quartz, feldspar, and rock fragments, in the fault gouge are arranged in the P-shear direction through rigid body rotation by a given shear stress. Using this characteristic, the fault motion can be estimated from the SPO inversely. Recently, a method for securing precision and reliability by measuring 3D-SPO using X-ray CT images and examining the shape of a large number of particles in a short time has been developed. As a result, the SPO method analyzes the orientation of thousands to tens of thousands of particles at high speed, suggests the direction of fault motion, and provides easy accessibility and reliable data. In addition, the shape information and orientation distribution data of particles, which are by-products obtained in the SPO analysis process, are expected to be used as basic data for conducting various studies such as the local deformation of fault rocks and the fault generation mechanism.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.93-98
• /
• 2010

Recently, as digital photogrammetry bas been widely used in various fields including construction, it is also being applied to several industries. It is essential for interior orientation to determine accurate focal length of camera, lens distortion, location of principal point in order to apply high quality digital camera to digital photogrammetry. In this study we conducted interior orientation for zoom lens camera with regular time and zoom factors and analyzed change of radial distortion parameters and location of principal point to evaluate interior orientation stability. As a result, radial distortion parameters($k_1,k_2$) are converged into zero by increasing zoom factors. There are correlation between the change of location of point and zoom factors. The displacement of $x_p$, $y_p$ increase as zoom factors rise high.

• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.190-194
• /
• 2012

The formation of high-quality polycrystalline silicon (poly-Si) on relatively low cost substrate has been an important issue in the development of thin film solar cells. Poly-Si seed layers were fabricated by an inverse aluminum-induced crystallization (I-AIC) process and the properties of the resulting layer were characterized. The I-AIC process has an advantage of being able to continue the epitaxial growth without an Al layer removing process. An amorphous Si precursor layer was deposited on Corning glass substrates by RF magnetron sputtering system with Ar plasma. Then, Al thin film was deposited by thermal evaporation. An $SiO_2$ diffusion barrier layer was formed between Si and Al layers to control the surface orientation of seed layer. The crystallinity of the poly-Si seed layer was analyzed by Raman spectroscopy and x-ray diffraction (XRD). The grain size and orientation of the poly-Si seed layer were determined by electron back scattering diffraction (EBSD) method. The prepared poly-Si seed layer showed high volume fraction of crystalline Si and <100> orientation. The diffusion barrier layer and processing temperature significantly affected the grain size and orientation of the poly Si seed layer. The shorter oxidation time and lower processing temperature led to a better orientation of the poly-Si seed layer. This study presents the formation mechanism of a poly seed layer by inverse aluminum-induced crystallization.

• The Korean Journal of Community Living Science
• /
• v.28 no.3
• /
• pp.461-479
• /
• 2017

This study was to investigate the appearance orientation and body shape management of adolescents in Daejeon. A survey was performed from December 16th~28th 2015 and 355 respondents were collected for analysis. 45.9% of the subjects were middle school students, whereas 54.1% of them were high school ones. The female and high school students tended to show higher ratings in lookism tendency and interests in beauty care, whereas male and middle school students tended to show higher ratings in physical satisfaction than the others. More than 40% of the respondents perceived them fatter than the standard weight, in particular, girls and the ones with opposite-sex friend perceived them fatter than their actual conditions. On body shape satisfaction, female and high school students indicated lower satisfaction. For body shape management, 75% of the female and 40% of the male students had tried weight control. The frequency and the duration time of exercise had higher for boys than girls, and the ones with opposite-sex friend than without. For methods of weight control, girls were more likely to do diet control, whereas boys were more committed to exercise. In general, students with high appearance orientation tended to control taking snacks and fast food or did diet control for body shape management. Conclusively, continued interest and guidance, not only at home but also in school, is required for students so that they can do proper body shape management to fulfill their appearance orientation and they will improve academic performance by gaining confidence through their appearance satisfaction.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.6
• /
• pp.566-576
• /
• 2003

Carbon-fiber reinforced plastics (CFRP) composite laminates often possess strong in-plane elastic anisotropy attributable to the fiber orientation and layup sequence. The layup orientation thus greatly influences its properties in a composite laminate. It could result in the part being rejected or discarded if the layup orientation of a ply is misaligned. A nondestructive technique would be very beneficial, which could be used to test the part after curing and to require less time than the optical test. In this paper, ultrasonic scanners were set out for different measurement modalities for acquiring ultrasonic signals as a function of in-plane azimuthal angle. The motorized scanner was built first for making transmission measurements using a pair of normal-incidence shear wave transducers. Another scanner was then built fer the acousto-ultrasonic configuration using contact transducers. A ply-by-ply vector decomposition model has been developed, simplified, and implemented for composite laminates fabricated from unidirectional plies. We have compared the test results with model data. It is found that strong agreement are shown between tests and the model developed in characterizing cured layups of the laminates.

• Korean Journal of Optics and Photonics
• /
• v.25 no.4
• /
• pp.193-199
• /
• 2014

The net effect of the emitter orientation, Mie scatters, and pillow lenses on the outcoupling efficiency (OCE) of a bottom-emitting OLED having an internal photonic crystal layer was investigated by a combined optical simulation based on the finite-difference time-domain method (FDTD) and the ray-tracing technique. The simulation showed that when the emitter orientation was horizontal with respect to the OLED surface, the OCE could be increased by 54% when a photonic crystal layer was employed, while it could be improved by 86% under optimized conditions of Mie scatters and pillow lenses applied to the glass substrate. The peculiar intensity distribution of the OLED, caused by the periodic lattice structure of the photonic crystal layer, could be ameliorated by inserting Mie scatters into the glass substrate. This study suggests that conventional outcoupling structures combined with control of the emitter orientation could improve the OCE substantially.

• Journal of Digital Convergence
• /
• v.19 no.6
• /
• pp.91-101
• /
• 2021

As many CSR activities grow steadily, how charitable giving messages affect donation attitude is received attention. In the current research, temporal orientation and donation recipients is presented an effective variables to judge a organization activities. This article based on CLT theory, we establish the experimental condition focused on interaction effects between two variables: time orientation in charitable activities outcomes(near future: a week vs. far future: a year); and based on the recognizability of recipients(a individual child vs. collective group). Result from study, charitable activities outcomes generated in near future orientation(far future orientation) increase donation attitude and affective when messages are used in a specific(general group) context. Furthermore, empathy of CSR organization is a mediator on donation attitude and affective. We expect that these findings have important implication for charitable giving strategy.