• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.230-242
• /
• 2022

The purpose of this study was to verify the effectiveness of the computerized cognitive rehabilitation program in which areas and to suggest effective ways to utilize the program in the future, being conducted for 20 college students. We lasted this study from May 3 to 23, 2021. As a result of analyzing the groups using the Computer-based Cognitive Rehabilitation Program (CoTras), in terms of the difference in accuracy for the case of visual perception group B was statistically significantly improved than group C(p<0.05). In the case of attention, memory, and orientation, there was no significant difference between groups(p>0.05). In the case of reaction time difference, there was no significant difference between groups in visual perception, concentration, memory, and orientation(p>0.05). And in order to improve attention and visual perception, it is recommended to conduct the program three times with a duration of 20 minutes, and in order to improve orientation and memory, it can be said that it is helpful to conduct one experiment for at least 30 minutes rather than conducting short and frequent experiments. Through this study, we found that it is effective to apply different times according to each area to improve cognitive function. In other words, depending on the purpose of which cognitive function is to be improved, the duration of the program should be applied differently.

• Computers and Concrete
• /
• v.30 no.5
• /
• pp.323-337
• /
• 2022

This paper proposes a numerical model to simulate the rotational behavior of steel fiber in fresh cement-based materials in the presence of a magnetic field. The results indicate that as the aspect ratio of fiber increases, the required minimum magnetic field intensity to make fiber rotate in viscous fluid increases. The optimal magnetic field intensity is 0.03 T for aligning steel fiber in fresh cement-based materials to ensure that the applying time of the magnetic field can be conducted concurrently with the vibrating process to increase the aligning efficiency. The orientation factor of steel fiber in cement mortar can exceed 0.85 after aligning by 0.03 T of the uniform magnetic field. When the initial angle of the fiber to the magnetic field direction is less than 10°, the magnetic field less than 0.03 T cannot make the fiber overcome the yield stress of fluid to rotate. The coarse aggregate in steel fiber-reinforced concrete is detrimental to the rotation and alignment of the steel fiber. But the orientation factor of ASFRC under the 0.03T of the magnetic field can also exceed 0.8, while the orientation factor of SFRC without magnetic field application is around 0.6.

• Korean Journal of Remote Sensing
• /
• v.24 no.3
• /
• pp.223-233
• /
• 2008

In the mid 90's, the U.S. government released images acquired by the first generation of photo reconnaissance satellite missions between 1960 and 1972. The Declassified Intelligent Satellite Photographs (DISP) from the Corona mission are of high quality with an astounding ground resolution of about 2 m. The KH-4A panoramic camera system employed a scan angle of $70^{\circ}$ that produces film strips with a dimension of $55\;mm\;{\times}\;757\;mm$. Since GPS/INS did not exist at the time of data acquisition, the exterior orientation must be established in the traditional way by using control information and the interior orientation of the camera. Detailed information about the camera is not available, however. For reconstructing points in object space from DISP imagery to an accuracy that is comparable to high resolution (a few meters), a precise camera model is essential. This paper is concerned with the derivation of a rigorous mathematical model for the KH-4A/B panoramic camera. The proposed model is compared with generic sensor models, such as affine transformation and rational functions. The paper concludes with experimental results concerning the precision of reconstructed points in object space. The rigorous mathematical panoramic camera model for the KH-4A camera system is based on extended collinearity equations assuming that the satellite trajectory during one scan is smooth and the attitude remains unchanged. As a result, the collinearity equations express the perspective center as a function of the scan time. With the known satellite velocity this will translate into a shift along-track. Therefore, the exterior orientation contains seven parameters to be estimated. The reconstruction of object points can now be performed with the exterior orientation parameters, either by intersecting bundle rays with a known surface or by using the stereoscopic KH-4A arrangement with fore and aft cameras mounted an angle of $30^{\circ}$.

• The Korean Journal of Health Service Management
• /
• v.2 no.1
• /
• pp.1-27
• /
• 2008

The purpose of this study is to investigate the effects of customer orientation factors in relation to medical services on the values of the service and customer satisfaction and loyalty. Those factors include patient safety and, as found by previous studies, specialization, explanation of what to be medically examined and customer orientation itself. Based on these pervious studies, this study surveyed customers of 7 general hospitals located in Busan to empirically identify relations between customer orientation factors of medical services and the values of the services and customer satisfaction. Results of the study can be summarized as follows. First, this study is very meaningful in that it established a basic theory of patient safety as one of the above customer orientation factors, and tried to empirically demonstrated the theory by applying it to medical services. Second, another of the factors, specialization was found positively affecting the values of medical services, but not affecting customer satisfaction. Customers are likely to choose specialized medical institutions even at higher cost when they undergo an accident or disease. Nevertheless, in factors, whether medical service providers are specialized is not influencing customer satisfaction. This is because medical institutions are failing to properly make recognized their specialization to customers who want to receive specialized medical services. Third, another of customer orientation factors, that is, explanation of what to be medically examined was found not having positive effects on the values of medical services and customer satisfaction. This is probably because enough time was not given for the explanation or because the explanation itself was not provided enough. Fourth, medical service providers' customer orientation was found positively influencing the values of medical services and customer satisfaction. In other words, it seems that customer-centered attitudes and behaviors of medical service providers had positive effects on customers' perception of medical services. Fifth, another of the factors, that is, patient safety was found positively affecting the values of medical services and customer satisfaction. This is probably because medical services' accurate diagnoses and reliable services had positive effects on customers' perception of medical services. Sixth, customers' perceived values of medical services were found having positive effects on customer satisfaction and loyalty. This suggests that the values of medical services are an antecedent variable that directly influences customer satisfaction and loyalty. Seventh, customer satisfaction was found positively affecting customer loyalty. This suggests that customer satisfaction is an antecedent variable of customer loyalty. In conclusion, this study showed that in relation to medical services, customer orientation factors' significant influences on the values of the services and customer satisfaction requires continuous efforts for raising customers' perceived qualities of medical services.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2191-2204
• /
• 1993

A sensor system has been developed to measure the posture(position and orientation) of mobile robots working in industrial environments. The proposed sensor system consists of a CCD camera, retro-reflective landmarks, a strobe unit and an image processing board. The proposed hardware system can be built in economic price compared to commercial vision systems. The system has the capability of measuring the posture of mobile robots within 60 msec when a 386 personal computer is used as the host computer. The experimental results demonstrated a remarkable performance of the proposed sensor system in the posture measurement of mobile robots - the average error in position is less than 3 mm and the average error in orientation is less than 1.5.

• Journal of the Korean Home Economics Association
• /
• v.35 no.6
• /
• pp.157-171
• /
• 1997

The purpose of this study was (1) to assess the level of financial management and financial goal attainment on housing purchase and children's educational expenditure, (2) to identify individual, family and environment variables which influence financial goal attainment, and (3) to investigate causal relation of variables which affect financial goal attainment. Data were collected from questionnaire with 772 married women who were residents of Jeonju. The major finding were as follows; (1) The levels of financial management and financial goal attainment on housing purchase and children's educational expenditure were middle. (2) The variables which exerted direct effects on financial goal attainment on housing purchase were time orientation of consumption life, asset, income stability, easiness in extending credit, financial planning, and financial implementing. the most powerful predictor of financial goal attainment on housing purchase was asset. (30 The variables which exerted direct effects on financial goal attainment on children's educational expenditure were time orientation of consumption life, asset, children's presence on the camp8us, easiness I extending credit, financial planning, and financial implementing. The most powerful predictor of financial goal attainment on children's educational expenditure was financial planning.

• 한국기계연구소 소보
• /
• s.15
• /
• pp.57-66
• /
• 1985

Fibers with a high degree of axial preferred orientation can be obtained from mesophase pitch. Prior to cabonization, the pitch fibers must be rendered in fusible so that their orientation is preserved. The stabilization of the pitch fibers was heated at temperature between $250^{circ}C$ and $300^{circ}C$ and a treatment time 5 to 80minutes. Oxidized fibers heated $1800^{circ}C$without stretching. Pitch based carbon fiber have a young's modulus as high as 304GN/$m^2$. The structure of the pitch cased carbon fiber is determining factor for the mechanical properties of the produced fibers. The structure depending on the pitch precursor as well as on the oxidation time.

• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.142-150
• /
• 2018

This paper describes the algorithm that lowers the dimension, maintains the object recognition and significantly reduces the eigenspace configuration time by combining the edge orientation histogram and principle component analysis. By using the detected object region as a recognition input image, in this paper the object recognition method combined with principle component analysis and the multi-layer network which is one of the intelligent classification was suggested and its performance was evaluated. As a pre-processing algorithm of input object image, this method computes the eigenspace through principle component analysis and expresses the training images with it as a fundamental vector. Each image takes the set of weights for the fundamental vector as a feature vector and it reduces the dimension of image at the same time, and then the object recognition is performed by inputting the multi-layer neural network.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1733-1736
• /
• 2008

ZnO thin films with preferred orientation along the (0 0 2) plane were fabricated by a sol-gel method. The effects of the annealing temperature, time, and thickness were studied by investigating UV-visible spectra, FT-IR spectra, and XRD of ZnO films. The films were dried and annealed ed at $100^{\circ}C,\;200^{\circ}C$, and $300^{\circ}C$ for 1hr, 2hrs, and 3hrs, respectively. The film showed the preferred (0 0 2) orientation and high transmittance near 90% in the visible range. Also, SEM images of the films exhibited very smooth surfaces without holes and cracks. Schottky diodes were fabricated by using ZnO sol-gel material. Au and Al were used as electrodes to make Ohmic and Schottky contacts, respectively. The annealing temperature, time and the thickness dependent I-V characteristics were presented in this article.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.77-80
• /
• 2010

The demand for human security significantly promotes the development of surveillance applications using a multi-sensor integrated UAV system. For more sophisticated operations, the system should provide a sequence of images rectified in a ground coordinate system in realtime. This rectification requires accurate position and attitude of the camera at the time of exposure of each image, which can be estimated through an Aerial Triangulation process using the GPS/INS data and tie points between adjacent images. In this work, the KLT tracker is utilized to obtain the tie points. To satisfy the realtime requirements, we present an approach to speed up the tracker by supplying the initial guessed positions of tie points based on the exterior orientation. The experimental results show that, when the guessed positions are supplied, the KLT tracker consumed less computational time than the ordinary KLT which is more suitable to be incorporated into the realtime image georeferencing process.