• Earthquakes and Structures
• /
• 제10권2호
• /
• pp.409-428
• /
• 2016

To realise the full benefits of a self-centering seismic resilient system, the designer must ensure that the entire structure does indeed re-center following an earthquake. The idealised flag-shaped hysteresis response that is often used to define the cyclic behaviour of self-centering concrete systems seldom exists and the residual drift of a building subjected to an earthquake is dependent on the realistic cyclic hysteresis response as well as the dynamic loading history. Current methods that are used to ensure that re-centering is achieved during the design of self-centering concrete systems are presented, and a series of cyclic analyses are used to demonstrate the flaws in these current procedures, even when idealised hysteresis models were used. Furthermore, results are presented for 350 time-history analyses that were performed to investigate the expected residual drift of an example self-centering concrete wall system during an earthquake. Based upon the results of these time-history analyses it was concluded that due to dynamic shake-down the residual drifts at the conclusion of the ground motion were significantly less than the maximum possible residual drifts that were observed from the cyclic hysteresis response, and were below acceptable residual drift performance limits established for seismic resilient structures. To estimate the effect of the dynamic shakedown, a residual drift ratio was defined that can be implemented during the design process to ensure that residual drift performance targets are achieved for self-centering concrete wall systems.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.127-132
• /
• 2003

A study of high-pressure n-heptane droplet vaporization is conducted with emphasis placed on equilibrium at vapor-liquid interface. General frame of previous rigorous model[1] is retained but tailored for flash equilibrium calculation of vapor-liquid interfacial thermodynamics. The model is based on complete time-dependent conservation equations with a full account of variable properties and vapor-liquid interfacial thermodynamics. The influences of high-pressure phenomena, including ambient gas solubility, thermodynamic non-ideality, and property variation on the droplet evaporation are investigated. The governing equations and associated moving interfacial boundary conditions are solved numerically using a implicit scheme with the preconditioning method and the dual time integration technique. And a parametric study of entire droplet vaporization history as a function of ambient pressure, temperature has been conducted. Some computational results are compared with Sato's experimental data for the validation of calculations. For low ambient temperatures, the droplet lifetime first increases with pressures, then decreases for high pressures. For higher ambient temperatures, the droplet lifetime increase with less amplitude than that of low ambient temperatures, which then decreases with more amplitude than that of low temperatures. The solubility of nitrogen can not be neglected in the high pressure and it becomes higher as the pressure goes up.

• 터널과지하공간
• /
• 제19권2호
• /
• pp.95-106
• /
• 2009

암석파괴역학과 파괴인성 이하의 응력상태에서 균열이 발생하고 성장하는 특성을 고려하여 암반사면의 진행성 파괴를 검토하였다. 굴착이 종료된 암반사면은 응력이 거의 변하지 않은 조건이지만, 시간이 경과함에 따라 절리면 내 미소한 접점에서 파괴가 발생하고 파괴된 접점의 수효가 증가함에 따라 절리면이 파괴되고, 파괴된 절리면이 많아져 사면이 파괴되는 진행성파괴 현상을 수치해석적으로 확인하였다. 따라서 암반사면의 진행성 파괴는 파괴인성보다 낮은 응력상태에 있는 암반 절리면 내 미소한 접점에서 시간의 경과에 따라 발생한 균열이 성장하여 사면을 파괴시키는 것으로 분석되었다.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.622-632
• /
• 1995

The present numerical study is aimed to investigate time-dependent characteristics of a two-dimensional lid-driven square cavity flow of three high Reynolds numbers, $7.5{\times}10^3$, $10^4$ and $3{\times}10^4$. A conservative convection term on irregular grids was adopted by renewing the MAC type difference schemes on regular grids. Relaxation of velocity and pressure is implemented by SOLA algorithm. In case of $Re=7.5{\times}10^3$, flow behavior converges to steady state after a transient period. But for $Re=10^4$, periodic unsteady sinusoidal fluctuation of local velocity and kinetic energy is found and continuous movements of small eddies in the secondary flow regions are also discovered. Random generation of eddies and their active migrating behavior are detected for $Re=3{\times}10^4$, resulting in complete unsteady and non-linear flow characteristics. And, an organized structure similar to a Moffat vortex is also observed from the time-mean flow patterns. Furthermore, a typoon-like vortex(TLV) appears intemittently and rotates along the separation regions and boundary layers.

• Bulletin of the Korean Chemical Society
• /
• 제27권11호
• /
• pp.1819-1824
• /
• 2006

The general objective of the present study was to investigate the potential application of the UV spectroscopic method for determination of the polymeric additives present in papermaking fibrous stock solutions. The study also intended to establish the surface-chemical retention model associated with the adsorption kinetics of additives on fiber surfaces. Polyamide epichlorohydrin (PAE) wet strength resin and imidazolinium quaternary (IZQ) softening agents were selected to evaluate the analytical method. Concentrations of PAE and IZQ in solution were proportional to the UV absorption at 314 and 400 nm, respectively. The time-dependent behavior of polymeric additives obeyed a mono-molecular layer adsorption as characterized in Langmuir-type expression. The kinetic modeling for polymeric adsorption on fiber surfaces was based on a concept that polymeric adsorption on fiber surfaces has two distinguishable stages including initial dynamic adsorption phase and the final near-equilibrium state. The simulation model predicted not only the real-time additive adsorption behavior for polymeric additives at high accuracy once the kinetic parameters were determined, but showed a good agreement with the experimental data. The spectroscopic method examined on the PAE and IZQ adsorption study could potentially be considered as an effective tool for the wet-end retention control as applied to the paper industry.

• 수면정신생리
• /
• 제5권1호
• /
• pp.12-17
• /
• 1998

Circadian rhythms in subjective alertness, mood, and performance can be classified as psychological rhythm, compared with physiological rhythm such as body temperature and hormonal change. While in normal condition entrained by 24hr zeitgeber, subjective alertness would reach its maximum value around midday, subjective alertness would parallel body temperature rhythm with its peak at evening in non-entrained, free-running state. With desynchronization technique, subjective alertness rhythm is thought to be controlled by both temperature and sleep-wake rhythm oscillator. Circadian performance rhythms depend on the kind of task tested. It shows parallelism with body temperature rhythm when subjects are tested with simple, repetitive task. But when tested with tasks requiring complex verbal reasoning or immediate memory, subjects would perform them best at early morning, with performance decreasing as time of day advances. The desynchronization technique shows that circadian performance rhythm of simple, repetitive task is dependent on temperature oscillator but circadian performance rhythm of complex verbal reasoning is influenced by both temperature and sleep-wake rhythm oscillator or another independent oscillator. It would be worthwhile to compare psychological rhythm with hormonal change such as cortisol and melatonin. And more simple and time-saving method than desynchronization technique may facilitate the study of the mechanism underlying psychological rhythm.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1139-1147
• /
• 2015

In this paper, an algorithm based on a model analysis of the online calculation of the root-mean-square (RMS) value of welding current for single-phase AC resistance spot welding (RSW) was developed. The current is highly nonlinear and typically non-sinusoidal, which makes the measuring and controlling actions difficult. Though some previous methods focused on this issue, they were so complex that they could not be effectively used in general cases. The electrical model of a single-phase AC RSW was analyzed, and then an algorithm for online calculation of the RMS value of the welding current was presented. The description includes two parts, a model-dependent part and a model-independent part. Using a previous work about online measurement of the power factor angle, the first part can be solved. For the second part, although the solution of the governing equation can be directly obtained, a lot of CPU time must be consumed due to the fact that it involves a lot of complex calculations. Therefore, a neural network was employed to simplify the calculations. Finally, experimental results and a corresponding analysis showed that the proposed algorithm can obtain the RMS values with a high precision while consuming less time when compared to directly solving the equations.

• 태양에너지
• /
• 제14권2호
• /
• pp.91-101
• /
• 1994

[ $Ca(OH)_2/CaO$ ]계 가역반응 싸이클을 이용하는 화학축열에서 열전도도가 낮은 고체입자 충전층의 전열성능을 개선하여 축열장치의 효율을 높이고자 한다. 본 연구에서는 반응기내의 CaO 입자 충전층의 전열성능 향상을 도모하기 위해 반응기 속에 구리판으로 된 전열핀을 설치하고 수화발열 반응시의 방열특성을 조사 하였다. 이 때 반응조건의 변화에 따른 반응층내의 온도 분포를 조사하고 전열촉진 효과에 대해 검토하였다. 그 결과 구리판 전열핀의 방열촉진 효과로 인하여 수화발열반응의 방열시간이 전열핀을 사용하지 않은 때보다 1/2 이상 단축되었으며, 방열시간은 전열핀의 매수에 가장 많은 영향을 받았다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.17-22
• /
• 2008

Construction project have extremely high risk in the process of construction owing to unexpected event, like as design amendment. As a result, owner have to endure enormous extra-cost to control the risk and continue to the project having more higher uncertainty. Also, if the structure is completed, it is needed that the structure is protected and maintained continuously during life cycle time to satisfying original aim of structure itself. LCC analysis to calculate cost of structure alternatives divides into two stage, one is design_LCC and the other is maintenace_LCC. But two stages all is needed in the transition deterioration model to calculate more reasonable LCC analysis. This paper developed the model using analysis of FMS contents and survey from professional about Prestressed concrete beam girder bridge(PC Beam bridge)in railway. The model is focused in project level of PC beam because any condition state information for element level analysis can not get up. This paper is intended to use the developed model in LCC analysis of PC Beam bridge in railway and constitute the foundation to perform more deep study in the near future.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.355-355
• /
• 2016

There has been an explosive development of nanocrystal (NC) synthesis and application due to their composition-dependent specific properties. Despite the composition, shape, and size of NCs foremost determine their physicochemical properties, the surface state and molecule conjugation also drastically change their characteristics. To make practical use of NCs, it is a prerequisite to understand the NC surface state and the degree to which they have been modified because the reaction occurs on the interface between the NCs and the surrounding medium. We report in here an analysis method to identify conjugated ligands and their binding states on semiconductor nanocrystals based on their molecular information. Surface science techniques, such as time-of-flight secondary-ion mass spectrometry (ToF-SIMS) and FT-IR spectroscopy, are adopted based on the micro-aggregated sampling method. Typical trioctylphosphine oxide-based synthesis methods of CdSe/ZnS quantum dots (QDs) have been criticized because of the peculiar effects of impurities on the synthesis processes. Since the ToF-SIMS technique provides molecular composition evidence on the existence of certain ligands, we were able to clearly identify the n-octylphosphonic acid (OPA) as a surface ligand on CdSe/ZnS QDs. Furthermore, the complementary use of the ToF-SIMS technique with the FT-IR technique could reveals the OPA ligands' binding state as bidentate complexes.