• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.5
• /
• pp.273-278
• /
• 2002

Even though the modulating signal frequency of the light is too high to detect directly, the signal can be extracted by frequency conversion at the same time as the detection by means of the non-linearity of the APD. An analysis is presented for super-high-speed optical demodulation by an APD with electronic mixing. A normalized gain is defined to evaluate the performance of the frequency conversion demodulation. The nonlinear effect of the internal capacitance was included in the small signal circuit analysis. We showed theoretically and experimentally that the normalized gain is dependent on the down converted difference frequency component. In the experiment, the down converted different frequency outputs became larger than the directly detected original signal for the applied local signal of 20㏈m.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.10
• /
• pp.864-868
• /
• 2007

Effect of high-temperature annealing on morphology of fully coherent self-assembled InAs quantum dots' grown on Si (100) substrates at $450^{\circ}C$ by atmospheric pressure metalorganic chemical vapor deposition(APMOCVD) was investigated by atomic force microscopy(AFM). When the dots were annealed at 500 - 600$^{\circ}C$ for 15 sec - 60 min, there was no appreciable change in the dot density but the heights of the dots increased along with the reduction in the diameters. In segregation from the InAs quantum dots and/or from the 2-dimensional InAs wetting layer which was not transformed into quantum dots looked responsible for this change in the dot size. However the change rates remained almost same regardless of annealing time and temperature, which may indicate that the morphological change due to thermal annealing is done instantly when the dots are exposed to high temperature annealing.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.173-177
• /
• 1995

Thermal cracks ard occured when thermal stress due to the hydration of cement exceeds the tensile strength of concrete. Since cracking causes poor durability of concrete, the effect of thermal cracking should be included for the desing and construction of massive concrete structures. In this study, an experiments are performed for the investigation of time dependent temperature and thermal stress of massive concrete structure at early ages. In order to measure temperatures and thermal stresses, concrete stress meter, embedded strain meter, non-stress meter, and thermocouples are used. Based on the analyses of measured thermal stress data, measured values by concrete stress meter are more reliable than those by embedded strain meter and non-stress meter, And measured values by concrete stress meter are compared with the calculated values by FEM program developed by DICT (DWTS2D). Calculated values by DWTS2D show good agreement with measured values.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.1
• /
• pp.9-16
• /
• 1996

This is an experimental investigation of the temperature generated in a cutting tool during the machining of stainless steel. The temperature results from the wear of the cutting tool are considered in order to investigate the relation between cause and effect of these factors. This possibility has been tested using a thermocouple technique to record temperature vs. time curves for a variety of cutting conditions. This is done by employing a thermocouple inserted on the tool tip near the major cutting edge. Temperature distributions are calculated using finite element method and compared to the contour maps measured by an optical system. It suggests that the temperature gradients and the tool performance will be dependent on certain facotrs in tool geometry when cutting this material.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.3
• /
• pp.122-127
• /
• 2007

Photosensitized extracts of 28 seaweed species were tested in vitro to examine the variation in their algicidal activities against the toxic microalga Cochlodinium polykrikoides. When both seaweed extracts and microalgae were exposed to UV and visible light, methanol extracts of Porphyra yezoensis showed 5.7- and 4.4-fold increasesin light-dependent algicidal activity, respectively. When only seaweed extracts were exposed to both UV (365 nm) and visible light (white lamp) at the same time, methanol extracts of Enteromorpha linza and Carpopeltis affinis showed 3.3- and 3.4-fold increases in algicidal activity, respectively. When UV-photosensitized extracts were left in the dark, the algicidal activity of Ecklonia cava increased 13-fold after 5 h. When visible light-photosensitized extracts were left in the dark, the algicidal activity of Monostroma nitidum increased by 3.3-fold in 1 h.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2001.11a
• /
• pp.101-101
• /
• 2001

In the present study, we explored to determine if insulin has any effect on the nuclear translocation of insulin receptor and tyrosine phosphoryaltion of nuclear proteins in the UMR-106 cells. Significant amount of insulin receptors and IRS-1 proteins were detected in the nucleus. IRS-1 and PI$_3$-Kinase appeared to translocate to the nucleus in a time dependent manner. Tyrosine phosphorylation of a number of proteins including 180 KDa, 85 KDa protein in the nucleus was significantly stimulated by insulin, suggesting IRS-1 and PI$_3$-Klnase was activated in the nucleus by insulin treatment. In addition, p70 S6 Kinase, a downstream target of PI3-Kinase was transiently appeared in the nucleus by insulin and its activity was stimulated by insulin. These results suggest that the insulin signaling system containing insulin receptor, IRS-1, PI$_3$-Kinase and p70 S6 Kinase operates in the nucleus of osteoblast cells. The nuclear insulin-mediated tyrosine phosphorylation may play an essential role in the gene expression, differentiation and growth of osteoblast cells.

• Structural Engineering and Mechanics
• /
• v.22 no.6
• /
• pp.647-664
• /
• 2006

The main purpose of this paper is to investigate the effect of transient stochastic analysis on nonlinear response of earth and rock-fill dams to spatially varying ground motion. The dam models are analyzed by a stochastic finite element method based on the equivalent linear method which considers the nonlinear variation of soil shear moduli and damping ratio as a function of shear strain. The spatial variability of ground motion is taken into account with the incoherence, wave-passage and site response effects. Stationary as well as transient stochastic response analyses are performed for the considered dam types. A time dependent frequency response function is used throughout the study for transient stochastic responses. It is observed that stationarity is a reasonable assumption for earth and rock-fill dams to typical durations of strong shaking.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.200-204
• /
• 1986

Particle size distribution in a Continuous Mixed Suspension Mixed Crystal Removal (CMSMPR) crystallizer has been analyzed using the Population Balance (PB) model. This method presents difficulties when the growth rate of crystal depends on the crystal size. Recent studies indicate that in many cases the growth rate is dependent on size when the crystal sizes are small. In this study, a Residence Time Distribution(RTD) model was proposed to take the size dependence into account together with an appropriate numerical scheme. When compared with the approximate results based on PB model, RTD model results showed improvements also a nucleation effect which is normally unimportant for steady state analysis. Start-up data for NaCl-Water-Ethanol system was compared with computed values.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.625-628
• /
• 2004

Ceruloplasmin (CP), the blue oxidase present in all vertebrates, is the major copper-containing protein of plasma. It has been proposed that oxidation of L-3,4-dihydroxyphenylalanine (DOPA) may contribute to the pathogenesis of neurodegenerative disorders. The effect of the oxidized products of DOPA on the modification of human CP was investigated. When CP was incubated with the oxidized L-DOPA, the protein was induced to be aggregated and ferroxidase activity was decreased in a time-dependent manner. Radical scavengers and catalase significantly inhibited the oxidized DOPA-mediated CP aggregation. Copper chelatrors, Diethylenetriaminepenta acetic acid (DTPA) and Diethyldithiocarbamic acid (DDC), also inhibited the oxidative modification of CP. The results suggested that DOPA oxidation led to the formation of free radical and induced the CP aggregation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.496-499
• /
• 2006

In this study, a practical method of shrinkage stress analysis on concrete slab in multi-story building is proposed, which considers both internal restraint and external restraint variation resulting from construction sequence. The shrinkage stress due to external restraint is obtained by multiplying relaxation coefficient to elastic shrinkage stress. The additional shrinkage stress due to internal restraint is obtained by residual strain of the elastic analysis. A verification example was analyzed and compared by the proposed method and commercial analysis program that is capable of time-dependent analysis of concrete. The results of 10-story example building show that the internal restraint of reinforcement increases the shrinkage stress considerably at the slabs under loose external restraint.