• Advances in aircraft and spacecraft science
• /
• v.3 no.4
• /
• pp.471-502
• /
• 2016

This paper presents the dynamic instability analysis of un-damped elastically supported piezoelectric functionally graded (FG) beams subjected to in-plane static and dynamic periodic thermomechanical loadings with uncertain system properties. The elastic foundation model is assumed as one parameter Pasternak foundation with Winkler cubic nonlinearity. The piezoelectric FG beam is subjected to non-uniform temperature distribution with temperature dependent material properties. The Young's modulus and Poison's ratio of ceramic, metal and piezoelectric, density of respective ceramic and metal, volume fraction exponent and foundation parameters are taken as uncertain system properties. The basic nonlinear formulation of the beam is based on higher order shear deformation theory (HSDT) with von-Karman strain kinematics. The governing deterministic static and dynamic random instability equation and regions is solved by Bolotin's approach with Newmark's time integration method combined with first order perturbation technique (FOPT). Typical numerical results in terms of the mean and standard deviation of dynamic instability analysis are presented to examine the effect of slenderness ratios, volume fraction exponents, foundation parameters, amplitude ratios, temperature increments and position of piezoelectric layers by changing the random system properties. The correctness of the present stochastic model is examined by comparing the results with direct Monte Caro simulation (MCS).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.88.1-88.1
• /
• 2015

In recent printed electronics technology, Photo-Sintering, a technique for sintering materials using a light source, has attracted attention as an alternative to time-consuming high-temperature thermal processes. The key principle of this technique is the selective heating of a strongly absorbent thin film, while preventing the heating of the transparent substrate by the light source. Many recent studies have used a flash lamp as the light source, and investigated the material-dependent effect of the width or intensity of the pulsed light. However, the flash lamp for sintering is not suitable for industry yet, because of needing too high power to sinter for a large scale. In energy-saving and large-scale sintering, LED technologies would be very useful in the near future. In this work, we investigated a sintering process for silver nanoparticles using UV-LED array. Silver nanoparticles in ink were inkjet-printed on a $1{\times}1cm$ area of a PET film and photo-sintered by 365 nm UV-LED module. A sheet resistance value as low as $72.6m{\Omega}/sq$ (2.3 - 4.5 times that of bulk silver) was obtained from the UV-LED sintering at 300 mW/cm2 for 50 min.

• Journal of Oriental Neuropsychiatry
• /
• v.20 no.3
• /
• pp.49-64
• /
• 2009

Objectives : The water and methanol extracts of Aconitum carmichaeli(Aconiti Tuber Preparat) were investigated for their anti-depressant effects. Methods : In this study, reserpine-induced hypothermia test, tail suspension test and hot plate test. Additionally, the brain monoamine oxidase activity was determined in vivo. Results: In the reserpine-induced hypothermia test, both extracts suppressed the fall of body temperature compared to the control group in a dose-dependent manner, suggesting the inhibition on hypothermia. In the tail suspension test, the methanol extract dose-dependently reduced the duration of immobility by 28.4% at a dose of 1 g/kg compared to control group, which is more effective than the water extract. In the hot plate test, the water extract and methanol extract increased the jump latency time compared to the control group, showing the inhibition rate of 198% and 182%, respectively, at a dose of 1 g/kg. Methanol extracts potently inhibited the brain monoamine oxidase activity in an in vivo assay compared to the control group, showing 84.6% inhibition, but the water extract revealed very weak activity. Conclusions : Above results suggested that the extract of Aconitum carmichaeli can be useful for the prevention and treatment of depression.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.1
• /
• pp.79-93
• /
• 2013

One of the biggest problems affecting bridges is the transverse cracking and deterioration of concrete bridge decks. The causes of early age cracking are primarily attributed to plastic shrinkage, temperature effects, autogenous shrinkage, and drying shrinkage. The cracks can be influenced by material characteristics, casting sequence, formwork, climate conditions, geometry, and time dependent factors. The cracking of bridge decks not only creates unsightly aesthetic condition but also greatly reduces durability. It leads to a loss of functionality, loss of stiffness, and ultimately loss of structural safety. This investigation consists of field, laboratory, and analytical phases. The experimental and field testing investigate the early age transverse cracking of bridge decks and evaluate the use of sealant materials. The research identifies suitable materials, for crack sealing, with an ability to span cracks of various widths and to achieve performance criteria such as penetration depth, bond strength, and elongation. This paper also analytically examines the effect of a wide range of parameters on the development of cracking such as the number of spans, the span length, girder spacing, deck thickness, concrete compressive strength, dead load, hydration, temperature, shrinkage, and creep. The importance of each parameter is identified and then evaluated. Also, the AASHTO Standard Specification limits liveload deflections to L/800 for ordinary bridges and L/1000 for bridges in urban areas that are subject to pedestrian use. The deflection is found to be an important parameter to affect cracking. A set of recommendations to limit the transverse deck cracks in bridge decks is also presented.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.416-421
• /
• 2009

This experiment was conducted to find out optimum priming treatment conditions to the sesame seed as a preliminary study for enhancing sesame germination properties. Effective priming agents and concentrations for sesame seed were $K_3PO_4$, 200 mM and PEG6000, -1.0 MPa respectively. Optimum priming temperature and duration were $15^{\circ}C$, 4 days in view of germination speed and germination percentage. PEG6000 with -1.0 MPa was selected as an efficient priming treatment condition at $15^{\circ}C$, 4 days. This study suggested that priming treatment to sesame seed would be an effective technique enhancing sesame seed germination and shortening time to the $T_{50}$ at the field condition, but the efficiency of priming treatments to the sesame seed would be strongly dependent on individual or integrated conditions of priming agent, concentration, temperature and duration etc.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.131-138
• /
• 2010

Because real flow of engine exhaust is very hot and highly transient, it may cause thermal and inertial loads on catalyzed filters in DPF. Transient and detailed flow and thermal simulations are necessary in this field. To assess the importance of time dependent phenomena, typical cone-type configuration such as an underbody DPF is selected for steady and transient analysis. User defined functions of FLUENT by sinusoidal inlet velocities are written and integrated with main solver for realistic simulation. Also, 4-cylinder and 6-cylinder engines for 3,000 L class are considered for the dynamic exhaust effect of engine type. Key parameters to understanding of catalyst performance and durability issues such as flow uniformity index and peak velocity are investigated. Also, pressure drop for engine power are considered. From the simulation results for three different cases, proper approach is recommended.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.1
• /
• pp.212-217
• /
• 2005

The purpose of this study was to examine the effects of Citrus Reticulata(CR) on the Cell Detachment and Apoptosis in Human Gastric Cancer SNU-668 Cells. The effect of CR on apoptosis was investigated through MTT assay, DAPI staining, and TUNEL assay. We also performed RT-PCR for apoptotic genes including BCL-2, BAX, and caspase-3, the caspase-3 activity assay, and western blotting for pro-CASP-3. Then, to detect that adhesion of cell to ECM was reduced by CR, we investigated mRNA expression of CDH1 and PTK2 using RT-PCR, and their protein expressions using western blotting, and immunocytochemistry in SNU-668 cells. In this study, the results showed that treatment of CR induced time and dose-dependent cell death in SNU-668 cells. Downregulated mRNA expression of BCL-2, and upregulated mRNA expressions of BAX and CASP-3 indicated that the cell death was due to apoptosis. Protein expression of inactivated CASP-3, and caspase-3 activity assay also showed that apoptosis was induced in CR-treated cells.

• The Plant Pathology Journal
• /
• v.33 no.2
• /
• pp.206-211
• /
• 2017

The effect of temperature on the rate of systemic infection of potatoes (Solanum tuberosum L. cv. Chu-Baek) by Potato virus Y (PVY) was studied in growth chambers. Systemic infection of PVY was observed only within the temperature range of $16^{\circ}C$ to $32^{\circ}C$. Within this temperature range, the time required for a plant to become infected systemically decreased from 14 days at $20^{\circ}C$ to 5.7 days at $28^{\circ}C$. The estimated lower thermal threshold was $15.6^{\circ}C$ and the thermal constant was 65.6 degree days. A systemic infection model was constructed based on experimental data, using the infection rate (Lactin-2 model) and the infection distribution (three-parameter Weibull function) models, which accurately described the completion rate curves to systemic infection and the cumulative distributions obtained in the PVY-potato system, respectively. Therefore, this model was useful to predict the progress of systemic infections by PVY in potato plants, and to construct the epidemic models.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.4
• /
• pp.295-301
• /
• 2016

The out-of-squareness is one of the error sources that affect the positioning accuracy of machine tools and coordinate measuring machines. Laser interferometer is widely used to measure the position and angular errors, and can measure the squareness using an optical square. However, the squareness measurement using the laser interferometer is difficult, as compared to other errors due to complicated optics setup and Abbe's error occurrence. The effect of out-of-squareness mainly appears at the face-diagonal of the movable plane. The diagonal displacements are also affected by the position dependent geometric errors. In this study, the squareness estimation techniques via diagonal displacement measurement using the laser interferometer without an optical square were proposed. For accurate estimation and measurement time reduction, the errors selected from proposed discriminant were measured. Discrepancy between the proposed technique with the laser interferometer (with an optical square) result was $0.6{\mu}rad$.

• Korean Journal of Veterinary Research
• /
• v.42 no.3
• /
• pp.321-326
• /
• 2002

The effect of nitric oxide synthase(NOS) inhibita, $N^G$-nitro-L-arginine-methyl ester(L-NAME) and prostanoid synthesis inhibiter, indomethacin on the photorelaxation, when was exposed to the long-wave length UV-light, was examined on the precontraction by the phenylephrine in the isolated pig renal artery. 1. UV-light relaxed both with-endothelium and without-endothelium in the pig renal arterial ring contracted by the phenylephrine. The magnitude of photorelaxation was dependent on the exposure time for UV-light. 2. UV-Iight induced relaxation was inhibited by L-NAME and indomethacin on the precontraction by the phenylephrine in the isolated pig renal artery. 3. UV-Iight induced relaxation was inhibited by methylene blue on the precontraction by the phenylephrine in the isolated pig renal artery. These results suggest that UV-light induced photorelaxation may be due to cGMP involved both nitric oxide and prostanoid on the precontraction by the phenylephrine in the isolated pig renal artery.