• Journal of Hydrogen and New Energy
• /
• v.30 no.4
• /
• pp.320-329
• /
• 2019

This study was performed by the numerical approach to investigate chemical behaviors of homogeneous syngas ($CO/H_2$) with nitric monoxide (NO) in pressurized oxy-fuel conditions. Hydrogen had a dominant effect to the ignition delay time of syngas due to the fast chemistry of its oxidation. Combustion was promoted by NO at the low temperature region. It was by the additional heat release through NO oxidation and production and consumption of major radicals related to the ignition. Two stage ignition behavior was shown in the pressurized condition by the accumulation of $H_2O_2$ produced from $HO_2$ radical. Additional NO oxidation was induced by the pressurized oxy-fuel condition to produce $NO_2$.

• Geomechanics and Engineering
• /
• v.17 no.3
• /
• pp.295-305
• /
• 2019

The bedding plane has a significant influence on the effect of blasting fragmentation and the overall performance of underground mining. This paper explores the effects of fragmentation of the bedding plane and different angles by using the numerical analysis. ANSYS/LS-DYNA code was used for the implementation of the models. The models include a dynamic compressive and tensile failure which is applied to simulate the fractures generated by the explosion. Firstly, the cracks propagation with the non-bedding plane in the coal with two boreholes detonated simultaneously is calculated and the particle velocity and maximum principal stress at different points from the borehole are also discussed. Secondly, different delay times between the two boreholes are calculated to explore its effects on the propagation of the fractures. The results indicate that the coal around the right borehole is broken more fully and the range of the cracks propagation expanded with the delay time increases. The peak particle velocity decreases first and then increases with the distance from the right borehole increasing. Thirdly, different angles between the bedding plane and the centerline of the two boreholes and the transmission coefficient of stress wave at a bedding plane are considered. The results indicated that with the angles increase, the number of the fractures decreases while the transmission coefficient increases.

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.121-127
• /
• 2023

A 500 km/h linear motor high speed terrestrial transportation service is planned to launch 2027 in Japan. In order to support 5G service in the train, the Sub-carrier spacing frequency of 30 kHz is planned to be used instead of common 15 kHz sub-carrier spacing to mitigate Doppler effect in such high-speed transportation. In addition, to increase the cell size of 5G mobile system, plural Base Station antenna will transmit the identical Down Link (DL) signal to form the expanded cell size along the train rail. In this situation, forward and backward antenna signals will be Doppler shifted by reverse direction respectively and the receiver in the train might suffer to estimate accurate Channel Transfer Function (CTF) for its demodulation. In this paper, Delay and Doppler Profiler (DDP) based Channel Estimator is proposed and it is successfully implemented in signal processing simulation system. Then the simulated performances are compared with the conventional Time domain linear interpolated estimator. According to the simulation results, QPSK modulation can be used even under severe channel condition such as 500 km/h, 2 path reverse Doppler Shift condition, although QPSK modulation can be used less than 200 km/h with conventional Channel estimator.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.34-40
• /
• 1998

The existing flood runoff models, Complex Hydrograph and HEC-1, have some problems which do not properly represent runoff characteristics on the Korean paddy basin and their basin slopes. In this study, FAS(Flood Analysis System) was developed in order to supplement those problems, which was built calibrating runoff curve number for paddy basin and applying basin slopes to classify 5 levels. And also the FAS can synthesize the flood hydrographs of subbasin and analyze flood routing along a stream. To verify the applicability of the FAS, the computed flood hydrographs were compared with the observed hydrographs from the four watersheds. In the small basin smaller than 10$\textrm{km}^2$, the results of the FAS did not completely agree with the observed ones due to concentration time delay of paddy storage effect while in the medium and large size basin showed good agreements between the observed and computed ones. Therefore, it was concluded that the FAS could be applied for the flood analysis of Korean watershed which was characterized by paddy storage effect.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1040-1043
• /
• 1996

The accuracy of the servo control in CNC system has a great influence on the duality of machine product. Tracking performance of the servo control is deteriorated mainly by the time delay of the servo system and the inertia of the work table or bed. Contouring errors occur in every interpolation steps by the effect of the tracking performance. In this paper, $H_{\infty}$ two-degree-of-freedom(TDF) controller is designed for improvement to improve the tracking performance. The designed controller is applied 3-axis machining center model and the cutting accuracy is simulated in case of corner cutting, circular and involute interpolation. Simulation results show that $H_{\infty}$ TDF controller designed in this paper has a good effect to improve tracking performance in CNC system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.134-135
• /
• 2014

In this study, mock-up test for high strength concrete with ERCO has been carried to analyse the effect of autogenous shrinkage reducing of using ERCO. The following results could be made as the conclusion. Results of EIS were lower than 2.5 and showed good resistance for separation of materials. For the setting time, specimen with ERCO showed delay of setting comparing with Plain. For the autogenous shrinkage, as the generation of saponification, capillary pores inside the concrete were filled by soap and the autogenous shrinkage has been obviously decreased. It could be identified that using ERCO in high strength showed good effect on reducing autogenous shrinkage in high strength concrete.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1891-1898
• /
• 1999

Traditional syntax-oriented serializability notions are considered to be not enough to handle in particular various types of transaction in terms of duration of execution. To deal with this situation, altruistic locking has attempted to reduce delay effect associated with lock release moment by use of the idea of donation. An improved form of altruism has also been deployed in extended altruistic locking in a way that scope of data to be early released is enlarged to include even data initially not intended to be donated. In this paper, we first of all investigated limitations inherent in both altruistic schemes from the perspective of alleviating starvation occasions for transactions in particular of short-lived nature. The idea of two-way donation locking(2DL) has then been experimented to see the effect of more than single donation in distributed database systems. Simulation experiments shows that 2DL outperforms the conventional two-phase locking in terms of the degree of oncurrency and average transaction waiting time.

• Korean System Dynamics Review
• /
• v.2 no.1
• /
• pp.93-112
• /
• 2001

Inter-Organizational Cooperation is the most common and important strategy in modern public and privet sectors managerial activities. In this paper the concepts of inter-organizational cooperation means not selfish cooperation as in the game circumstance and theory, but general collaborative action between organizations, they have share same goal. The achievement level of jointed-goal of inter-organization is depended upon the performance of cooperation, which resulted from the conditions and circumstances of cooperation. This paper analyses the effect of inter-organizational cooperation on achievement level of the jointed goal between two organizations with computer simulation model of the system dynamics approach. In the computer simulation model, three factors, goal perception, communication, and control, are considered as a key conditions of cooperation, which impact on the performance of cooperation. Simulation model was constructed with focus on the dynamic interactions between these three factors and the achievement level of jointed-goal. Consequently, the results found in this paper may provide further grounds for reducing the time delay that included in the conditions of cooperation.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.199-207
• /
• 2009

It is important to initialize Image Plate (IP) completely for removing residual latent image by sodium lamp for reliability and repeatability of computed radiography (CR) system. The purpose of this study was to evaluate latent images of computed radiography (CR) images respect to delay time after erasure of foregone latent image and its effect, and erasure level. Erasure thoroughness for CR acceptance test from American Association of Physicist in Medicine (AAPM) Report 93 (2006) was also evaluated. Measurements were made on a CR (Agfa CR 25; Agfa, BELGIUM) system. Chest postero-anterior (PA), Hand PA, L-spine lateral radiographs were chosen for evaluation. Chest phantom (3D-torso; CIRS, USA) was used for Chest PA and L-spine lateral radiography. For Hand PA radiography, projections was done without phantom. Except Hand PA radiographs, noise was increased with delay time, and ghost image was appeared on overexposed area. Effect of delay after erasure on latent image was not seen on naked eye, but standard deviation (SD) of pixel value on overexposed area was relatively higher than that of other areas. On Hand PA and Chest PA radiographs, noise were not occurred by adjustment of erasure level. On L-spine lateral images at lower erasure level than standard level, noise including ghost image were occurred because of high tube current. Erasure thoroughness of CR system in our department was to be proved by these evaluation. The results of this study could be used as a baseline for IP initialization and reliability of CR images.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.15-22
• /
• 2012

A performance index of singalized intersections is a standard to optimize signal control variables and to manage traffic flow. Traffic delays is generally used to minimize the average delay time on intersections or networks, progression efficiency is used to improve travel speed of main cooridors or to provide transit signal priority. We manage traffic flows with only selecting one index between delays and progression according to the objective of traffic management and field characteristics. In real field, the driver's satisfaction is high in any performance criteria when the waiting time is shorter and the unnecessary stop in front of traffic is smaller. This paper aims to develop simulation model to represent real progression with concurrently considering delays and progression. In order to reflect an effect of level of traffic volumes and residual queues which don't be considered in prior progression model, we apply shockwave model with flow-density diagram. We derive Cell Transmission Model of Daganzo in order to develop the delay index and the progression index for the macroscopic simulation model. In order to validate the effect, we analysis traffic delays and progression efficiency with comparing this model to Transyt-7F and PASSER V.