• Korean Journal of Food Science and Technology
• /
• v.16 no.3
• /
• pp.273-278
• /
• 1984

Changes in rheological properties of rice starch-water systems during the gelatinization were evaluated with the tube viscometer at temperatures between 50 and $85^{\circ}C$ and for the concentrations ranging from 3-5% rice starch. The flow consistency index increased exponentially with time at a particular temperature while being linearly dependent upon the concentration. The gelatinization rate measured by rheological method followed Arrhenius type equation. The value of activation energy of gelatinization for 5% rice starch was about 25 kcal/g mol.

• Advances in concrete construction
• /
• v.3 no.1
• /
• pp.71-90
• /
• 2015

In order to investigate the feasibility and advantage of tuff used as pozzolan in cement-based composite, the representative specimens of tuff were collected, and their chemical compositions, proportion of vitreous phase, mineral species, and rock structure were measured by chemical composition analysis, petrographic analysis, and XRD. Pozzolanic activity strength index of tuff was tested by the ratio of the compression strength of the tuff/cement mortar to that of a control cement mortar. Pozzolanic reaction degree, and the contents of CH and bond water in the tuff/cement paste were determined by selective hydrochloric acid dissolution, and DSC-TG, respectively. The tuffs were demonstrated to be qualified supplementary binding material in cement-based composite according to relevant standards. The tuffs possessed abundant $SiO_2+Al_2O_3$ on chemical composition and plentiful content of amorphous phase on rock texture. The pozzolanic reaction degrees of the tuffs in the tuff/cement pastes were gradually increased with prolongation of curing time. The consistency of CH consumption and pozzolanic reaction degree was revealed. Variation of the pozzolanic reaction degree was enhanced with the bond water content and relationship between them appeared to satisfy an approximating linear law. The fitting linear regression equation can be applied to mutual conversion between pozzolanic reaction degree and bond water content.

• Wind and Structures
• /
• v.17 no.5
• /
• pp.515-535
• /
• 2013

The present study aims to investigate characteristics of the flow structures around the Ahmed body by using both experimental and numerical methods. Therefore, 1/4 scale Ahmed body having $25^{\circ}$ slant angle was employed. The Reynolds number based on the body height, H and the free stream velocity, U was $Re_H=1.48{\times}10^4$. Investigations were conducted in two parts. In the first part of the study, Large Eddy Simulation (LES) method was used to resolve the flow structures around the Ahmed body, numerically. In the second part of the study the particle image velocimetry (PIV) technique was used to measure instantaneous velocity fields around the Ahmed body. Time-averaged and instantaneous velocity vectors maps, streamline topology and vorticity contours of the flow fields were presented and discussed in details. Comparison of the mean and turbulent quantities of the LES results and the PIV results with the results of Lienhart et al. (2000) at different locations over the slanted surface and in the wake region of the Ahmed body were also given. Flow features such as critical points and recirculation zones in the wake region downstream of the Ahmed body were well captured. The spectra of numerically and experimentally obtained stream-wise and vertical velocity fluctuations were presented and they show good consistency with the numerical result of Minguez et al. (2008).

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.452-461
• /
• 2021

Background: The prevailing global work scenario and deteriorating health facilities in economies indulge the risk perspective in the labor market model. This is the reason that the risk factor is cautiously attributed to wages and labor market efficiencies specifically in developing and emerging economies. In this respect, Occupational Injuries of Workers (OIW) is considered essential to demonstrate the risk and Occupational Health and Safety (OHS) setups given the constraints of the labor. Intuitively, the prime objective of this study is to make an assessment of the labor market considering the OIW through the indicators of industry division, employment status, occupational distribution, adopted treatment, gender and regionality. Methods: The assessment strategy of the study has been categorized into trend analysis and Index Value Calculation (IVC) segments employing the data from 2001 to 2018. Results: The pattern of the selected indicators of the OIW has been observed in the available data while the IVC estimations are considered through time and reference categories. The findings of both exercises revealed absolute and relative heterogeneities at both industry and occupational levels. Conclusion: The consistency for gender and regional distribution of both assessments points out the need for effective policy initiatives. The study suggests separate analyses of industry and occupations for a better understanding of the OHS setups and up-gradation in Pakistan.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.908-914
• /
• 2019

Fusion power shutdown system (FPSS) is a safety system to stop plasma in case of accidents or incidents. The gas injection system for the FPSS presented in this work is designed to research the flow development in a closed system. As the efficiency of the system is a crucial property, plenty of experiments are executed to get optimum parameters. In this system, the flow is driven by the pressure difference between a gas storage tank and a vacuum vessel with a source pressure. The idea is based on a constant volume system without extra source gases to guarantee rapid response and high throughput. Among them, valves and gas species are studied because their properties could influence the velocity of the fluid field. Then source pressures and volumes are emphasized to investigate the volume flow rate of the injection. The source pressure has a considerable effect on the injected volume. From the data, proper parameters are extracted to achieve the best performance of the FPSS. Finally, experimental results are used as a quantitative benchmark for simulations which can add our understanding of the inner gas flow in the pipeline. In generally, there is a good consistency and the obtained correlations will be applied in further study and design for the FPSS.

• Structural Engineering and Mechanics
• /
• v.69 no.5
• /
• pp.579-589
• /
• 2019

Numerous experimental studies have been conducted on reinforced concrete (RC) beams strengthened in shear with externally bonded fiber reinforced polymer (EBFRP). The objectives of this work are to study the behavioral trends of shear strengthened EBFRP RC beams after updating the existing database. The previously published databases have been updated, enriched and cross checked for completeness, redundancy and consistency. The updated database now contains data on 698 EBFRP beams and covers the time span from 1992 to 2018. The collected database then refined applying certain filters and used to investigate and capture better interactions among various influencing parameters affecting the shear strength of EBFRP beams. These parameters include the type and properties of FRP, fiber orientation as well as the strengthening scheme, the shear and the longitudinal steel reinforcement ratios, the shear span ratio, and the geometry of the member. The refined database is used to test the prediction accuracy of the existing design models. Considerable scatters are found in the results of all tested prediction models and in many occasions the predictions are unsafe. To better understand the shear behavior of the EBFRP RC beams and then enhance the prediction models, it was concluded that focused experimental programs should be carried out.

• Journal of East-West Nursing Research
• /
• v.25 no.1
• /
• pp.26-32
• /
• 2019

Purpose: The purpose of this methodological study was to examine the validity and reliability of a translated Korean version of Templer's death anxiety scale among older adults. Methods: The translated Korean scale was administered to 203 older people who aged over 65 years. Exploratory factor analysis was utilized to assess the factor structure of the scale. Internal consistency of the scale was determined using Cronbach's ${\alpha}$ and Guttman's split-half coefficient. Results: Factor loadings of the scale ranged from .43 to .86. The scale showed good internal consistencies of both total scale (13 items, ${\alpha}=.83$) and three sub-scales: meaning of death (6 items, ${\alpha}=.77$), death-related event (5 items, ${\alpha}=.72$), and time of death (2 items, ${\alpha}=.80$). The concurrent validity compare with Fear of Death Scale was significant. The Cronbach's alpha and Guttman's split-half coefficient were .83 and .80, respectively. Conclusion: The findings of this study demonstrate that the Korean version of Templer's death anxiety scale had satisfactory validity and reliability to measure death anxiety among Korean older people.

• Journal of KIBIM
• /
• v.10 no.4
• /
• pp.98-109
• /
• 2020

Based on the prior research which developed the consistency review checklist of the BIM model and 2D drawing through the drawing analysis of the construction documents phase, the apparent limits of the existing template and the template development items were derived. As well, the BIM-based drawing templates of the construction documentation phase were developed and verified using ArchiCAD BIM software. The developed template was then applied to the actual project model in the construction documents phase, and, as a result, 50% of existing work elements could be utilized as templates. This is an increase of more than 30% over the existing template utilization elements, and it is analyzed to be effective in practical application and utilization. Based on the results of this study, if the BIM model construction criteria matching the drawing's utilization purpose are presented, while at the same time the BIM data interlocking and drawing template development studies are conducted, the utilization of BIM data can be maximized and additional drawing work can be minimized to increase the percentage of template utilization elements. In addition, it is believed that this can employed to address functional and institutional problems of BIM-based drawing and make a contribution to the activation of BIM.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.1101-1109
• /
• 2021

Nowadays, quality affects product or service performance and customer loyalty in the competitive business' environment. This is truly important when it comes to how the customer interprets the service's satisfaction and the judgment of the purchase process as a whole, in view of the fact that service quality is an abstract and elusive construction due to the three characteristics of services: intangibility, heterogeneity, and inseparability of output and consumption. The main purpose of this paper is to determine the hotel service quality using the Fuzzy Analytic Hierarchy Process (FAHP) and SERVQUAL method. In this study, a five-star hotel's real case is considered in evaluating the service quality criteria. The results revealed that Tangibles and Assurance are the most critical service quality criteria in the hotel industry. Accurate records, service consistency, Necessary arrangements for disabled people, Service flexibility to guests' demands, and Providing the services at the time it promises are the most influencing sub-criteria of service quality. These findings indicate that hotels should concentrate on sequentially and organized priority factors to enhance service quality. This method of service quality assessment may also aid in distinguishing between hotels. Finally, as a future direction, more additional parameters can be used as a potential guide in our proposed model for the dynamic decision-making approach.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.245-254
• /
• 2021

The intelligent control algorithm based on the real-time biological monitoring system has been emphasized to enhance the survivability of the combat warrior in the future combat fields. In this study, AHP(Analytic Hierarchy Process) method was deployed to categorize the factors related to the improvement of survivability, then to determine the relative importances between them. As the details of the research process, the historical survivability determinants were firstly categorized, which was nextly judged their relative importance by the experts in the actual fileds through the survey of AHP. In this process, the consistency of the survey was investigated to filter out the error. As a result, the global priority of factors can be acquired to establish the optimized operational concepts in the intelligent warrior platform.