• 한국치위생학회지
• /
• 제16권3호
• /
• pp.337-346
• /
• 2016

Objectives: This study aims to investigate and analyzed the priority of vocational core competency factors in dental hygienists in Gwangju. Methods: Expert survey was conducted and Analytic Hierarchy Process(AHP) was applied to evaluate the weighting factors. First, we established the vocational core competency defined in NCS as AHP analysis model. The vocational core competency has 10 categories and 34 sub-categories. Secondly, AHP survey was conducted by 195 dental hygienists in Gwangju. Finally, the weights representing relative importance of each factor were calculated by using AHP method. Results: The AHP analysis on 10 categories showed that the weighting of interpersonal skills(0.165) was higher than any other categories while that of numeracy(0.035) was at the bottom, and the analysis on sub-categories revealed that the most important factors in each categories included the teamwork skills(interpersonal skills), problem-solving capability(problem-solving skills), listening skills(communication skills), ethical community(professional ethics), ability to understand business(ability to understand organizational structure), applicable technical skills(technical skills), self-management skills(self-development capability), information processing capabilities(information capacity), ability to manage time(resource management capabilities) and basic math skills(numeracy). Conclusions: The results in this study can be used as basic data for the development of liberal arts curriculum for dental hygiene education.

• 농촌계획
• /
• 제10권4호
• /
• pp.9-18
• /
• 2004

The purpose or this study is to simulate spatially the urban expansion phenomena with a cellular automata (CA) technique using GIS. A study area, Suwon city, was selected for test of model verification and application with the classified land-use maps of three data years: 1986, 1996, and 2000. The urbanized potential maps were generated with seven criteria of one geographic factor (slope of land), and six accessibility factors (time distances from city, national road, Seoul, station, and built-up boundary), considering their weighting values, which were optimized by WSM (weighted scenario method for intensity order) combined a ranking method and a AHP technique. The optimized weighting values at the urban expansion between 1986 and 1996 were applied to verify the CA model for the other expansion between 1996 and 2000. The results of model application showed that urban sprawl phenomena of the urban expansion toward rural area can be simulated spatially and temporally with several boundary conditions considering various scenarios for the criteria and parameters of the model. Ultimately, this study can contribute to reference data for land-use planning of urban fringe areas.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제5권5호
• /
• pp.611-618
• /
• 1999

원하는 정보에 대한 빠르고 정확한 접근은 정보화 사회를 살아가는 현대인들에게 성공의 여부를 결정짓는 중요한 요소가 되었다. 지금까지 대용량의 문서를 효율적으로 검색할 수 있는 정보 검색 시스템에 관한 많은 개발이 이루어져 왔다. 그러나, 연구용으로 자유롭게 이용될 수 있는 시스템들의 대부분이 영문 정보 검색 시스템으로 국한되어 있으며, 한영 혼용 정보 검색 시스템의 개발은 미흡한 실정이다. 본 연구에서는 영문 정보 검색 시스템 freeWAIS-sf를 분석하고, 한글 형태소 분석기 HAM을 이용하여 freeWAIS-sf를 한글화하였다. 또한 freeWAIS-sf의 가중치 기법을 변경하고, 변경된 가중치 기법이 보다 높은 검색 효과를 제공함을 실험을 통하여 입증하였다.

• 한국멀티미디어학회논문지
• /
• 제12권9호
• /
• pp.1333-1341
• /
• 2009

컴퓨터 게임에서 전술적 경로 찾기란 캐릭터의 이동 경로를 결정할 때, 최단 거리나 최소 시간 등의 요소만이 아니라 주변의 전술 정보를 고려하여 경로를 선택해야 하는 경로 찾기를 말한다. 경로 찾기에 전술 정보를 포함하는 한 가지 방법은 게임에 필요한 전술 정보를 각 정보의 중요도에 따라 가중치를 부여하고 가중 합으로 휴리스틱 함수를 표현하는 것이다. 전술 정보의 가중치의 결정은 경로를 찾기 위한 탐색의 성능과 구해지는 경로의 특성을 결정짓기 때문에 매우 중요하다. 본 논문에서는 레벨 설계자가 캐릭터의 특성에 맞는 경로 표본을 제공하면 현재 가중치에 의해 탐색된 경로와 주어진 표본 경로와의 차이를 이용하여 더 나은 가중치로 조정함으로서 휴리스틱 함수를 개선하는 방법을 제안한다. 제안된 방법은 탐색 오차를 발견하여 휴리스틱을 학습하기 위해 수정된 탐색 알고리즘과 퍼셉트론-유사 가중치 갱신 공식을 포함한다. 시뮬레이션 결과를 통해 전술 정보를 이용한 경로 계획과 기존의 경로 찾기의 차이를 보여주며 학습의 성능에 영향을 주는 요인들에 대해 분석하고 실제 게임 환경에 적용한 예를 보여 준다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권3호
• /
• pp.299-303
• /
• 2012

Inbreeding is the mating of relatives that produce progeny having more homozygous alleles than non-inbred animals. Inbreeding increases numbers of recessive alleles, which is often associated with decreased performance known as inbreeding depression. The magnitude of inbreeding depression depends on the level of inbreeding in the animal. Level of inbreeding is expressed by the inbreeding coefficient. One breeding goal in livestock is uniform productivity while maintaining acceptable inbreeding levels, especially keeping inbreeding less than 20%. However, in closed herds without the introduction of new genetic sources high levels of inbreeding over time are unavoidable. One method that increases selection response and minimizes inbreeding is selection of individuals by weighting estimated breeding values with average relationships among individuals. Optimum genetic contribution theory (OGC) uses relationships among individuals as weighting factors. The algorithm is as follows: i) Identify the individual having the best EBV; ii) Calculate average relationships ($\bar{r_j}$) between selected and candidates; iii) Select the individual having the best EBV adjusted for average relationships using the weighting factor k, $EBV^*=EBV_j(1-k\bar{{r}_j})$ Repeat process until the number of individuals selected equals number required. The objective of this study was to compare simulated results based on OGC selection under different conditions over 30 generations. Individuals (n = 110) were generated for the base population with pseudo random numbers of N~ (0, 3), ten were assumed male, and the remainder female. Each male was mated to ten females, and every female was assumed to have 5 progeny resulting in 500 individuals in the following generation. Results showed the OGC algorithm effectively controlled inbreeding and maintained consistent increases in selection response. Difference in breeding values between selection with OGC algorithm and by EBV only was 8%, however, rate of inbreeding was controlled by 47% after 20 generation. These results indicate that the OGC algorithm can be used effectively in long-term selection programs.

• 한국지능시스템학회논문지
• /
• 제10권5호
• /
• pp.487-496
• /
• 2000

본 논문에서는, HCM 클러스러팅 방법과 유전자 알고리즘을 이용하여 다중 FNN 모델을 동정하고 최적화 한다. 제안된 다중 FNN은 Yamakawa의 FNN을 기본으로 하며, 퍼지 추론 방법으로 간략 추론을, 학습으로는 오류 역전파 알고리즘을 사용한다. 다중 FNN 모델의 구조와 파라미터를 동정하기 위해 HCM 클러스터링과 유전자 알고리즘을 사용한다. 여기서, 시스템 모델링을 위해 데이터 전처리 기능을 수행하는 HCM클러스터링 방법은 I/O 프로세서 공정 데이터를 이용하여 입출력 공간분할에 의한 다중 FNN 구조를 결정하기 위해 사용된다. 또한 유전자 알고리즘을 사용하여 멤버쉽함수의 정점, 학습율, 모멘텀 계수와 같은 다중 FNN 모델의 파라미터들을 동조한다. 모델의 근사화와 일반화 능력 사이에 합히적 균형을 얻기 위해 하중계수를 가진 합성 성능지수를 사용한다. 이 합성 성능지수는 근사화 및 예측 능력사이의 상호 균형과 의존성을 고려한 하중계수를 가진 합성 목적함수를 의미한다. 데이터 개수, 비선형성의 정도에 의존하는 이 합성 목적함수의 하중계수의 선택, 조절을 통하여 최적의 다중 FNN 모델을 설계하는 것이 유용하고 효과적임을 보인다. 제안된 모델의 성능 평가를 위하여 가스로 공정의 시계열 데이터와 비선형 함수의 수치 데이터를 사용한다.

• 상하수도학회지
• /
• 제12권2호
• /
• pp.127-139
• /
• 1998

The objectives of this study is at the development of the channel routing model which can be used for flood prediction. Among the routing models, the hydraulic technique of the implicit scheme in the dynamic equation is selected to route the unsteady varied flow in the open channel. The channel routing model is catchment runoff which computed by the conceptual and transfer function model. The conceptual and transfer function model can simulate the catchment runoff accurately. As a result of investigating the channel routing model, the optimal weighting factor ${\theta}$ which fixes two points between time line is chosen, and also, the optimal error tolerance which satisfies computing time and converge of solution is determined in this study.

• 산업공학
• /
• 제14권3호
• /
• pp.227-235
• /
• 2001

There is a rapidly growing demand for wireless telecommunication. However, the number of usable channel is very limited. Therefore, the problem of channel assignment becomes more and more important to use channels as efficiently as possible. The objective of this paper is to develop an evolution program (EP) to find an efficient dynamic channel assignment method for minimum interference among the channels within reasonable time. The series of specific channel number is used as a representation of chromosome. The only changed chromosomes by crossover and mutation are evaluated in each generation to save computation time and memory for the progress of improved EP. We can easily differentiate the fitness value of each chromosome using proposed evaluation function. We also control the weighting factor of the mutation rate and the used number of elitist chromosomes for the speed of convergence to the optimal solution.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.658-663
• /
• 1987

The new controller developed here, which is the facility with only one measurement, is a new concept for the level controller of the existing nuclear steam generator. A MACS (Microcomputer-based Adaptive Control System of a Steam Generator) is quite practical and efficient, and has also simple structure and higher flexibility in the installment for actual plant. A key ingredient of this system is adaptive regulator which can calculate adaptive, optimal valve position in response to changes in the dynamics of the process and the disturbances. In spite of many difficulties in the steam generator water level control at low power, it can be concluded from the experimental and simulation results, that the MACS can provide optimal, robust steam generator level control from zero to full power. The amount of the control input effort can be reduced by adjusting the weighting factor. However, the steady state water level errors are generated. To avoid the steady errors, the different adaptive algorithm should be investigated in the future. The 3 second sampling time is acceptable for this system. However, action should be taken to shorten the sampling time for better digital control.

• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.44-54
• /
• 1998

In this study a new arc sensor algorithm for automatic weld seam tracking was proposed, which uses the relative welding current variation according to the tip-to-workpiece distance in GMA welding. Since the new developed arc sensor algorithm is not sensitive to unstable factors of arc signal, the system is expected to get rid of the problems of already existing arc sensor system which include the difficulty of modeling the process for various welding conditions and limitation of application to thick plate welding. Thus the system is applicable not only to thick plate welding but also to thin plate welding. To implement the new arc sensor algorithm the system parameters which include sampling time, averaging range, weighting factor of moving averaging, basic compensation time, and basic compensation distance were determined by experimental analysis. Consequently this system has shown the successful tracking capability for the various welding conditions.