• 대한가정학회지
• /
• 제25권1호
• /
• pp.11-18
• /
• 1987

The purpose of this study was to investigate the crease recovery and the elastic recovery as a function of the direction of plain woven fabrics. The crease recovery was measured by Mosanto's Method and the elastic recovery was investigated by Autograph for ten kinds of plain woven fabric samples. The results were as follows; 1. Values of crease recovery were in the order of bias>weft>warp. 2. The lengthening of recovery time had a little effect on crease recovery. 3. The directions of crease recovery were affected by that of thread twist. 4. The linearity was shown between total crease recovery and warp-weft crease recovery. 5. The linearity was found between crease recovery and elastic recovery in the fabrics.

• 복식
• /
• 제51권4호
• /
• pp.81-95
• /
• 2001

The purpose of this study is to categorize the typs of fabrics and to analyze weaving method and pattern design on the silk fabrics from Jang-Gi Jung s tomb. The conclusions of this research are as follows. 1) Among the 32 pieces of excavated clothes, 90% of them were made of silk fabric and 65% used patterned silk. I would assume, therefore, that the tomb was owned by a person of higher society who could afford the best clothes of the time. 2) The weaving methods of silk include tabby, twill damask with different direction (2/1 warp faced ground, 1/3$\cdot$1/4 weft faced pathern), self-patterned satin damask (4/1 warp faces ground, 1/4 weft faced pattern), and brocaded satin damask. 3) The arrangement of the motifs and the kinds of patterns on these silk fabric can be divided into two categories: first group is allover arrangement of peony or lotus and second group is the scattered arrangement of omen of luck. 4) Two pieces of fabric was stamped and the letters of the stamp make me to think about the possibility that the fabrics are from China. But to make this paint clear more relics of this kind should be excavated so that further research can be done.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.26-36
• /
• 2009

The objective of this study is to investigate the elution characteristics of the partial dispositioned hollow nylon filament and the mechanical properties of the eluted fabrics according to the weight reduction conditions. For this purpose, the partial dispositioned nylon/PET composite filament, SDY 70d/48f was prepared, and warp beam was also prepared on the sizing machine using these yarns. Four kinds of woven fabrics were designed with different warp and weft densities and these fabrics specimens were eluted with weight reduction conditions of two kinds of NaOH concentration (30, 40g/l), three kinds of weight reduction temperature (50, 60, $85^{\circ}C$) and two kinds of weight reduction time (30, 60min). The eluting rates of these fabrics specimens were analysed with various weight reduction conditions. The eluting characteristics of these fabrics were discussed with the cross-section of nylon hollow filament measures by SEM. Finally, the mechanical properties of the partial dispositioned hollow nylon fabrics were measured and discussed with various weight reduction conditions.

• 한국정보과학회논문지:시스템및이론
• /
• 제26권11호
• /
• pp.1285-1295
• /
• 1999

본 논문은 방대한 크기의 볼륨 데이타를 효율적으로 렌더링하기 위한 셀 기반 웨이브릿 압축 방법을 제시한다. 이 방법은 볼륨을 작은 크기의 셀로 나누고, 셀 단위로 웨이브릿 변환을 한 다음 복원 순서에 따른 런-길이(run-length) 인코딩을 수행하여 높은 압축율과 빠른 복원을 제공한다. 또한 최근 복원 정보를 캐쉬 자료 구조에 효율적으로 저장하여 복원 시간을 단축시키고, 에러 임계치의 정규화로 비정규화된 웨이브릿 압축보다 빠른 속도로 정규화된 압축과 같은 고화질의 이미지를 생성하였다. 본 연구의 성능을 평가하기 위하여 {{}} 해상도의 볼륨 데이타를 압축하여 쉬어-？ 분해(shear-warp factorization) 알고리즘에 적용한 결과, 손상이 거의 없는 상태로 약 27:1의 압축율이 얻어졌고, 약 3초의 렌더링 시간이 걸렸다.Abstract This paper presents an efficient cell-based wavelet compression method of large volume data. Volume data is divided into individual cell of {{}} voxels, and then wavelet transform is applied to each cell. The transformed cell is run-length encoded according to the reconstruction order resulting in a fairly good compression ratio and fast reconstruction. A cache structure is used to speed up the process of reconstruction and a threshold normalization scheme is presented to produce a higher quality rendered image. We have combined our compression method with shear-warp factorization, which is an accelerated volume rendering algorithm. Experimental results show the space requirement to be about 27:1 and the rendering time to be about 3 seconds for {{}} data sets while preserving the quality of an image as like as using original data.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.599-602
• /
• 2005

본 연구에서는 패션 디자인 분야에서 완성된 의상의 모델 사진을 활용해 다양한 원단을 직접 Draping함으로써 새로운 디자인을 창출할 수 있고 직접 샘플이나 시제품을 제작하지 않고도 시뮬레이션만으로 의상 작품을 확인 할 수 있도록 하였다. 또한 모델과 원단 이미지에 대한 데이터베이스를 구축하여 실시간으로 Mapping 결과를 확인할 수 있으며, 모델 사진과 원단 이미지의 자연스러운 Draping을 구현하기 위해 영역(Path)추출 알고리즘, 워프(Warp)알고리즘, 명암 추출과 적용 알고리즘을 이용한 2.5D Mapping 시스템을 개발 하였다.

• 복식문화연구
• /
• 제13권5호
• /
• pp.729-742
• /
• 2005

This paper studied the ban on 'Po[포]', including hemp and ramie, on the basis of Joseon Wangcho Silok (the True Record of Joseon Dynasty). Po is the important point which can help to understand the people's life related with clothing. This paper showed that in the early years of the Joseon Dynasty, the state had forced kinds of bans on some fabrics many times. Among the bans of the fabrics-making the main part was the bans on Po, along with rice, used as money in those days. The state had on Po enacted on the policy to intend to promote paper money circulation more widely. However, people didn't want to use paper money. The reason why cloth could be practical and functional as a kind of currency was that people could make clothes with it at any time while they used it as money. People avoided using paper money that could not be used in that way, and so did public officials. At that time, Po that was generally used as money was the hemp of five warp threads. The measurement of the hemp in 7chi[촌; a Korean inch] by 35chok[척] and 32cm by 16m by modern metric. It also showed that it has been thought that the blended fabrics are the fabrics that were made of raw silk-threads and cotton threads as warp and weft respectively. However, the fact that there is a record of 'Jeo Ma Gyo Jik Po[저마교직포의]'(blended fabrics and clothes made of ramie and hemp) and there appear the new proofs of the fieldwork investigation shows that the concept of blended fabrics might be various or changeable as time passed.

• 한국시뮬레이션학회논문지
• /
• 제6권1호
• /
• pp.1-13
• /
• 1997

In this paper, we present a partitioning algorithm for distributed simulation of DEVS (Discrete Event System Specification) models. To preserve concurrency inherent in models, the proposed algorithm utilizes the structural information of models. Through benchmark simulation experiments, we show that the proposed algorithm can generate good partitions.

• Journal of Computing Science and Engineering
• /
• 제11권2호
• /
• pp.58-68
• /
• 2017

While graphics processing units (GPUs) can be used to improve the performance of real-time embedded applications that require high throughput, it is challenging to estimate the worst-case execution time (WCET) of GPU programs, because modern GPUs are designed for improving the average-case performance rather than time predictability. In this paper, a reordering framework is proposed to regulate the access to the GPU data cache, which helps to improve the accuracy of the estimation of GPU L1 data cache miss rate with low performance overhead. Also, with the improved cache miss rate estimation, tighter WCET estimations can be achieved for GPU programs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.191-194
• /
• 1995

The business of manufacturing is increasingly becomeing time-compresssing, precise and long-life oiented, owing to various needs form the consumers and harsh global competition. with the emergence of the layer laminate maunfacturing methods, it is possible to prototypes directly from 3D CAD and additive process, the production time and cost have shortened dramatically. However there are some problems like surface-step, dimensional deviation and warp. A newly developed powder casting is suitable for rapid-manufacturing metallic tools. Powder casting can serve as a promising repid tooling method because of high density charateristics and low dimensional shrinkage below 0.1% during sintering and infiltration. By this process, we have realized significant time savings bypassing the wait for prototype tooling and cost savings eliminating the expense of conventional prototype tooling process.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.85-90
• /
• 1998

The business of manufacturing is increasingly becoming time-compressing, precise and long-life oriented, owing to various needs from the consumers and harsh global competition. With the emergence of the layer laminate manufacturing method, it is possible to produce prototypes directly from 3D CAD and additive process, the production time and cost have shortened dramatically. However there are some problems like surface-step, dimensional deviation and warp. A newly developed powder casting is suitable for rapid-manufacturing metallic tools. Powder casting can serve as a promising rapid tooling method because of high density characteristics and low dimensional shrinkage below 0.1％ during sintering and infiltration. By this process, we have realized significant time savings bypassing the wait for prototype tooling and cost savings eliminating the expense of conventional prototype tooling process.