• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1993년도 추계학술대회발표논문집; 서강대학교, 서울; 25 Sep. 1993
• /
• pp.185-190
• /
• 1993

In this paper, we investigate the effect of production uncertainty - especially demand fluctuation and activity time variation, to production control policies. First, we examine three famous production control policies, namely, MRP, JIT, OPT, from shop floor control perspective and analyze the difference among them. Based on these, simulation studies are performed to draw out the effects of demand fluctuation which are classified into demand lumpiness and demand irregularity, and, the effects of activity time variation which are classified into standard time variation and non-standard time variation. Experimental investigation shows that, in terms of demand fluctuations, MRP is affected by demand lumpiness, but JIT by demand irregularity. And we also see that both MRP and JIT are influenced by standard time variation with respect to activity time variations.

• 한국통신학회논문지
• /
• 제22권11호
• /
• pp.2401-2408
• /
• 1997

The measured pulse shapes provided in the given data package demonstrated pulse distortions due to laser speckle. the distorted pulse shapes were carefully analyzed, modeled, and then applied to the DTTL(Digital-data Transition Tracking Loop)[1] bit synchronizer simulator to measure the mean time delay and its delay variation performance. The result showed that the maximum mean time delay variation with the modeled data was 12.5% when window size equals 1. All the data given were located within this modeled boundary and the maximum eman time delay variation was 7% in this case. The mean time delay variation was known to be smaller by reducing the window size [2][5][6]. The mitigated delay variation was 2.5% in the modeled case and 1.4% in the data set given when the windown size equals 0.1. With the digital DTTL insteal of analog DTTL, similar results was obtained.

• 대한전기학회논문지
• /
• 제45권3호
• /
• pp.365-373
• /
• 1996

This paper presents the effects of rotor time constant variation and the on-line tuning algorithm of the rotor time constant. If the value of the rotor time constant is set incorrectly, the IFOC (Indirect Field Oriented Control)scheme exhibits deteriorated performance according to the wrong slip command. These variation effects of the rotor time constant are caused by the slip calculator where it is known that the rotor time constant play an important role in the aligned rotor flux. Using the two torque angles (stationary torque angle, rotating torque angle), the variation of the rotor time constant is identified, and the rotor time constant of the controller is tuned to the proper value of the machine. As the result, with the proposed algorithm, the dynamics of the deteriorated IFOC system, where the rotor time constant is varied, is improved. For the purpose of the validity of this proposed algorithm, the computer simulations and the experiments have been performed and the explanation of the results is presented. (author). refs., figs., tab.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.553-571
• /
• 2019

Geometric variation including welding distortion accumulates as many parts are joined together, ultimately affecting the final product. This variation is then subjected to correction, which requires considerable effort, time, and cost. This variation can be categorized as in-plane/out-of-plane variation. To date, studies on variation simulation have largely focused on the out-of-plane variation, however the variation generated in the in-plane direction requires more time and efforts to correct afterwards. This research aims to construct a variation simulation model considering both the in-plane and out-of-plane variations. A geometric analysis was performed to derive an equation that reflects the coupling effect of the out-of-plane variation on the in-plane variation. The proposed model is validated with case study analysis and the results shows that good fidelity in predicting and diagnosing the in-plane variation during the block assembly process considering welding distortion.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.974-978
• /
• 1991

Electro-pneumatic valve is an electro-mechanical device which converts electric signal into pneumatic flow mu or pressure. A measurement of dynamic response time is very important to evaluate valve performance. Dynamic response time of electro-pneumatic valve has a variation accordance with valve types, operating way and test standard. In this study, automatic measurement system of dynamic response time is composed based on test condition of dynamic response time test standard(CETOP, JIS). Also, in this study test pressure variation characteristics accordance with variation of solenoid excitation power, and we developed dynamic response measurement system enable to compare of and analyze these two characteristics.

• 한국환경과학회지
• /
• 제16권1호
• /
• pp.45-53
• /
• 2007

This study was carried out to investigate the variation of organic, nitrogen and phosphorus in $(AO)_2$ SBBR process according to the variation of operating cycle at the high TOC concentration. The operation time in anoxic (anaerobic) time to oxic time was 1:1. Three lab-scale SBBRS were fed with synthetic wastewater based on glucose as carbon source, The variation of total TOC removal was similar each other irrespective of operation time, however, the TOC concentrations in SBBRs showed a little difference according to the operating condition. In SBBR, complete nitrification was not occurred at all reactors, however, R3 showed a higher nitrification than R2. And in SBBR, the variation of operating time more affected at phosphorus removal than nitrogen removal. R2 which had the shortest time at the 1st aeration time showed the lowest phosphorus release and uptake efficacy.

• 한국초지조사료학회지
• /
• 제8권3호
• /
• pp.68-76
• /
• 1988

The variation of rumination response in steers fed a same amount of orcharugrass hay was investigated. With three steers (6, 12, 24 months) of the Japanese Black Breed, rumination behaviour was measured continuously during a 5 days period by masseter EMG telemetry system. The results are summarized as follows: 1. The average daily rumination time of respective animals were 438,447 and 433 min. with small daily variation both within and among animal. But the rumination time per DM kg of hay consumed varied from 66 to 138 min., and calf spent longer than older calf. 2. Actural chewing time showed small variation, and percentage of actural chewing time spent in rumination time was from 88 to 93% on individual average. 3. The daily number of chewing in rumination was approximately 25,000 to 30,000 with large individual differences. The chews per DM kg intake varied from 3,800 to 9,600, and calf chewed more than older calf. 4. The average rate of chewing per 100 sec. (chewing speed), there was a large difference between animals i.e. 104, 114, 131 respectively, but very little variance between days in individual. 5. No relation between day to day variations in eating time and rumination behavior, but significantly positive correlation was observed in the relation among rumination time, chewing time, No. of boluses and No. of chews. 6. Active time of day in rumination altered considerably day to day, but variation in the amount of rumination per day as expressed by the rumination time was relatively small.

• 한국환경보건학회지
• /
• 제35권2호
• /
• pp.116-123
• /
• 2009

Laboratory scale experiments were conducted to investigate the removal characteristics of nitrogen and phosphorus by the variation of aeration time in four sequencing batch reactors (SBRs). In R1 which has the shortest aeration time as 1 h, MLVSS concentration in reactor decreased by the wash-out of biomass because of the poor sedimentation. The TOC removal efficiencies were almost similar in 3 reactors except R1. At the low aeration time as 1 h, the nitrification was severely inhibited by the deficiency of oxygen. ${NH_4}^+$-N removal efficiency was decreased by the decrease of aeration time. At the aeration time over 2 h, the phosphorus removal efficiency was not affected by the variation of aeration time. The nitrification was inhibited but the phosphorus release and uptake was not inhibited by the decrease of low aeration time. Therefore, we can see that the phosphorus removal microorganisms are superior to nitrification microorganisms in oxygen utilization.

• Journal of information and communication convergence engineering
• /
• 제5권1호
• /
• pp.54-58
• /
• 2007

A real-time frame-layer rate control algorithm with a token bucket traffic shaper is proposed for distortion variation minimization. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. The proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better visual and PSNR performances than the existing rate control method.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1935-1940
• /
• 2016

본 논문에서는 RC 시정수 회로를 포함하는 비교기를 이용해 보조 전하펌프를 제어하여 루프 필터 출력 전압 변동 폭을 최소화 하는 위상고정루프(PLL)를 제안하였다. 루프 필터의 출력 전압변화는 작은 시정수 값을 가지는 RC와 큰 시정수 값을 가지는 RC를 통해 비교기의 입력으로 각각 전달된다. 작은 시정수를 가지는 RC는 루프 필터의 신호의 변화를 빠르게 전달하는 반면 큰 시정수를 가지는 RC는 루프 필터의 신호를 매우 느리게 전달하여 일정한 크기의 전압과 같이 동작한다. 비교기의 출력 신호는 보조 전하펌프를 제어하고, 이는 전압제어발진기(VCO)의 입력 전압 변동 폭을 줄여준다. 그러므로 제안한 위상고정루프는 위상 잡음이 많이 제거된 신호를 생성한다. 제안된 위상고정 루프는 1.8V의 공급전압에서 0.18um CMOS 공정의 파라미터를 이용하여 Hspice로 시뮬레이션을 수행하고, 동작을 검증하였다.