• Journal of the Korean institute of surface engineering
• /
• v.33 no.4
• /
• pp.241-250
• /
• 2000

Popcorn cracking phenomena frequently occur in thin plastic packages during the solder reflow process, which are definitely affected by poor adhesion of Cu-based leadframe to epoxy molding compounds (EMCs). In the present work, in order to enhance the adhesion strength, a brown-oxide treatment on the Cu-based leadframe was carried out and the adhesion strength of leadframe/EMC interface was measured in terms of fracture toughness by using sandwiched double-cantilever beam (SDCB) specimens. After the adhesion tests, fracture surfaces were analyzed by SEM, AES, EDS and AFM to make the failure path clear. Results showed that failure path was closely related to the oxidation time and the interfacial fracture toughness.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.789-795
• /
• 2008

Slope stability is affected by various factors. For safety management of slopes, monitoring systems have been widely constructed along railway lines. The representative data from the systems are variations of ground profile such like ground water level and pore water pressure etc. and direct displacement measured by ground clinometer and tension wire sensor. Slopes are mainly effected by rainfall and rainfall causes the decrease of factor of safety(FOS). Because FOS varies linearly by the variation of ground water level and pore pressure, it has a weak point that could not define the time and proper warning sign to secure the safety of the train. In this study, alternative of FOS such as reliability index and probability of failure is applied to slope stability analysis introducing the reliability concept. FOS, reliability index, probability of failure and velocity of probability of failure of the slopes by variation of ground water level are investigated for setting up the specification of safety management of slopes. By executing case study of a slope(ILLO-IMSUNGLI), it is showed to be applied to specification of safety management.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.1
• /
• pp.77-84
• /
• 2017

Generally, a time-varying vibration signal is generated in a rotating machine system, and when there is a failure in the rotating machine, the signal contains noise. In this paper, we propose a system consisting of an adaptive predictor and a binary tree filter bank for analyzing time - varying vibration signals with noise. And the vibration signal analyzed results in this system is used for fault diagnosis of the rotating machine. The adaptive predictor of the proposed system predicts the periodic signal components, and the filter bank system decomposes the difference signal between the input signal and the predicted periodic signal into subband. Since each subband signal includes a noise signal component due to a failure, it is possible to diagnose the failure of the using rotary machine. The validity of the proposed vibration signal analysis method is shown in the simulations, where the periodic components cancelled vibrating signals are decomposed to 32 subband, and the signal characteristics related faults are analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8B
• /
• pp.514-524
• /
• 2005

In optical burst switching(OBS) networks, the ingress edge router assembles packets in the same class queue into the appropriate size of burst. A burst control packet(BCP) is generated for channel reservation of corresponding data burst and sent earlier than the corresponding data burst with an offset time. Offset time is determined considering the number of hops from source to destination and the required quality of service(QoS). After offset time, the burst data is passed through tile pre-configured optical switches without any O/E/O conversion. But a failure in OBS networks may lead to the loss of bursts until the ingress nodes receive the failure indication signal. This results in a significant degradation in QoS. Therefore, in this paper, we propose a fault-tolerant node architecture based on sub-carrier multiplexing to reduce the effects of failure in OBS networks. The Performance of the proposed fault-tolerant node architecture exhibits considerable improvement as compared with the previous ones.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.335-342
• /
• 2013

In this study, reliability software cost model considering logarithmic fault detection rate based on observations from the process of software product testing was studied. Adding new fault probability using the Goel-Okumoto model that is widely used in the field of reliability problems presented. When correcting or modifying the software, finite failure non-homogeneous Poisson process model. For analysis of software cost model considering the time-dependent fault detection rate, the parameters estimation using maximum likelihood estimation of inter-failure time data was made. In this research, Software developers to identify the best time to release some extent be able to help is considered.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.654-662
• /
• 2016

As the number of gates and basic events in fault trees increases, it becomes difficult to calculate the exact probability of the top event. In order to overcome this difficulty the BDD methodology can be used to calculate the exact top event probability for small and medium size fault trees in short time. Fault trees are converted to BDD by using CUDD library functions and a failure path search algorithm is proposed to calculate the exact top event probability. The backward search algorithm is more efficient than the forward one in finding failure paths and in the calculation of the top event probability. This backward search algorithm can reduce searching time in the identification of disjoint failure paths from BDD and can be considered as an effective tool to find the cut sets and the minimal cut sets for the given fault trees.

• Clinical and Experimental Pediatrics
• /
• v.54 no.7
• /
• pp.277-281
• /
• 2011

Failure to thrive (FTT) is a term generally used to describe an infant or child whose current weight or rate of weight gains is significantly below that expected of similar children of the same age, sex and ethnicity. It usually describes infants in whom linear growth and head circumference are either not affected, or are affected to a lesser degree than weight. FTT is a common problem, usually recognized within the first 1-2 years of life, but may present at any time in childhood. Most cases of failure to thrive involve inadequate caloric intake caused by behavioral or psychosocial issues. The most important part of the outpatient evaluation is obtaining an accurate account of a child's eating habits and caloric intake. Routine laboratory testing rarely identifies a cause and is not generally recommended. FTT, its evaluation, and its therapeutic interventions are best approached by a multi-disciplinary team includes a nutritionist, a physical therapist, a psychologist and a gastroenterologist. Long term sequelae involving all areas of growth, behavior and development may be seen in children suffering from FTT. Early detection and early intervention by a multidisciplinary team will minimize its long term disadvantage. Appropriate nutritional counseling and anticipatory guidance at each well child visit may help prevent some cause of FTT.

• Tribology and Lubricants
• /
• v.35 no.5
• /
• pp.317-322
• /
• 2019

In spite of progress in tribological research, machine component failure due to friction and wear has been reported frequently. This failure may lead to secondary damage that can cause huge expense for maintenance and repair. To prevent economic loss, it is important to detect and predict the initial failure point. In this sense, various researchers have been tried to develop Condition Monitoring (CM) method using Acoustic Emission (AE) generated while the materials undergo failure. In this study, effect of particles on friction and wear was investigated using the pin-on-plate friction test and AE signal was recorded with a band-width type AE sensor. The experiments were performed in dry and lubricant conditions using steel and glass as specimens. After the experiment, 3D laser microscope image was captured to evaluate the wear behavior quantitatively. The AE signal was analyzed in time-domain and frequency-domain. The amplitude was compared with the frictional results. The results of this study showed that particle generation accelerate wear, generate high magnitude AE signal and change the frequency characteristics of the signal. Also, lubricant condition test results showed low coefficient of friction, low wear rate, and low magnitude of AE signal compared to the dry condition. It is expected that the results of this study will aid in better assessment of wear in CM technology

• Geomechanics and Engineering
• /
• v.18 no.6
• /
• pp.595-603
• /
• 2019

A modified model combining Kriging and Monte Carlo method (MC) is proposed for probabilistic estimation of tunnel face stability in this paper. In the model, a novel uniform design is adopted to train the Kriging, instead of the existing active learning function. It has advantage of avoiding addition of new training points iteratively, and greatly saves the computational time in model training. The kinematic approach of limit analysis is employed to define the deterministic computational model of face failure, in which the Hoek-Brown failure criterion is introduced to account for the nonlinear behaviors of rock mass. The trained Kriging is used as a surrogate model to perform MC with dramatic reduction of calls to actual limit state function. The parameters in Hoek-Brown failure criterion are considered as random variables in the analysis. The failure probability is estimated by direct MC to test the accuracy and efficiency of the proposed probabilistic model. The influences of uncertainty level, correlation relationship and distribution type of random variables are further discussed using the proposed approach. In summary, the probabilistic model is an accurate and economical alternative to perform probabilistic stability analysis of tunnel face excavated in spatially random Hoek- Brown media.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.588-593
• /
• 2002

Paraquat, one of the potent herbicides, causes fatal damage to many vital organs, when orally ingested, resulting in circulatory failure, respiratory distress syndrome, and a few other serious problems, but there is no known specific antidote against it. Of the possible problems related to paraquat intoxication, oliguric acute renal failure, which has been known to develop within 24 or 48 hours after intoxication, are notoriously life-threatening. So we attempted to investigate the clinical characteristics and progress of paraquat-induced acute renal failure and the therapeutic possibilities of herbal medicines. All of the fifteen subjects were treated with intravenous fluid injection of 5% dextrose saline or 10% dextrose water in conjunction with herbal medicines which were used for oral administration or gargling. Gamdutang, a decoction of Semen Glycin(黑豆 200g) and Radix Glycyrrhizae(甘草 100g) with addition of other herbs when necessary, was administered orally. At the same time, gargling fluid, consisted of Chinese ink(墨汁), char-frying powder of Rhei Rhizoma(大黃炒炭末), Succus phyllostachyos(竹瀝), was used to detoxify the oral cavity. Serum levels of Blood Urea Nitrogen(BUN) and Creatinine reached its peak on the third day of hospitalization, but then decreased and fell within the normal range on the 7th day and remained there. Serum levels of Na+ and K+ decreased down below the lower limits of normal range on the 7th day and on the 3rd day, respectively. Then they returned back within normal limits. Mean urine output on the 1st day of hospitalization was 1,050ml and it continuously increased to reach more than 2,000ml on the 14th day. From that day on, it stayed over 2,000ml. Fifteen cases of acute renal failure caused by paraquat intoxication were treated with combined treatments of oriental and western medicine in our hospital. However, we think that it is necessary to study further about the way to combine oriental and western medicine, to find out a more effective treatment method.