• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.566-572
• /
• 2016

Software Reliability implemented in software development is one of the most important issues. In finite failure NHPP software reliability models for software failure analysis, the hazard function that means a failure rate may have constant independently for failure time, non-increasing or non-decreasing pattern. In this study, software development cost analysis considering the variable shape parameter of Erlang distribution as the failure life distribution in the software product testing process was studied. The software failure model was applied finite failure Non-Homogeneous Poisson Procedure and the parameters approximation using maximum likelihood estimation was accompanied. Thus, this paper was presented comparative analysis by applying a software failure time data to the software, considering the shape parameter of Erlang distribution for development cost model analysis. When compared to the cost curve in accordance with the shape parameter, the model of smaller shape can be seen that the optimal software release time delay and more cost. Through this study, it is thought that it can serve as a preliminary information which can basically help the software developers to search for development cost according to software shape parameters.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.2
• /
• pp.123-131
• /
• 2001

Reliability calculation of a system is frequently required in industrial, military, and everyday life situations. For such a calculation, it is necessary to specify the configuration of components and subsystems, the failure mode of each component, and the states in which the system is classified as failed. In this paper, we are primary interested in the time to the first failure of a system. And we discuss failure probability of coherent system under various condition, especially focus on probability calculation of subsystem failure before system failure used by Bayes formula. Problem statement and general applications illustrated by several examples.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4134-4145
• /
• 2023

This paper proposes strain-based failure model of A533B1 pressure vessel steel to simulate failure, followed by application to OECD lower head failure (OLHF) test simulation for experimental validation. The proposed strain-based failure model uses simple constant and linear functions based on physical failure modes with the critical strain value determined either using the lower bound of true fracture strain or using the average value of total elongation depending on the temperature. Application to OECD Lower Head Failure (OLHF) tests shows that progressive deformation, failure time and failure location can be well predicted.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.8
• /
• pp.594-601
• /
• 2004

We analyze checkpoint strategy for multiple real-time periodic tasks with hard deadlines. Real-time tasks usually have deadlines associated with them. For multiple real-time tasks, checkpoint strategy considering deadlines of all tasks is very difficult to derive. We analyze the problem of checkpoint placement for such multiple periodic tasks. In our strategy, the interval between checkpoints is determined for each task considering its deadline. An approximated failure probability over a specified interval is derived. Then the number of checkpoints for each task is selected to minimize the approximated failure probability. To show the usefulness of our strategy, error bound between the exact and the approximated failure probability is estimated, which is revealed to be quite small.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.545-557
• /
• 2024

A real-case incident occurred where a 9-meter-high segment of a pre-fabricated concrete separation wall unexpectedly collapsed. This collapse was triggered by improperly depositing excavated soil against the wall's back, a condition for which the wall segments were not designed to withstand lateral earth pressure, leading to a flexural failure. The event's analysis, integrating technical data and observational insights, revealed that internal forces at the time of failure significantly exceeded the wall's capacity per standard design. The Lattice Discrete Particle Model (LDPM) further replicates the collapse mechanism. Our approach involved defining various parameter sets to replicate the concrete's mechanical response, consistent with the tested compressive strength. Subsequent stages included calibrating these parameters across different scales and conducting full-scale simulations. These simulations carried out with various parameter sets, were thoroughly analyzed to identify the most representative failure mechanism. We developed an equation from this analysis that quickly correlates the parameters to the wall's load-carry capacity, aligned with the simulation. Additionally, our study examined the wall's post-peak behavior, extending up to the point of collapse. This aspect of the analysis was essential for preventing failure, providing crucial time for intervention, and potentially averting a disaster. However, the reinforced concrete residual state is far from being fully understood. While it's impractical for engineers to depend on the residual state of structural elements during the design phase, comprehending this state is essential for effective response and mitigation strategies after initial failure occurs.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.4
• /
• pp.65-76
• /
• 2001

Field data have been recorded as the time to failure or the number of failure of systems. We consider the time to failure and covariate variables in some pre-specified follow-up or warranty period. This paper aims to investigate study on the reliability estimation when some additional field data can be collected within-warranty period or after-warranty period. A various likelihood-based methods are outlined and examined for exponential or Weibull distribution.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.5
• /
• pp.5-16
• /
• 2016

A rainfall induced slope failure is a common natural hazard in mountainous areas worldwide. Sudden and rapid failures which have a high possibility of occurrence in a steep slope are always the most dangerous due to their suddenness and high velocities. Based on a series of experiments this study aimed to determine a critical angle which could be considered as an approximate threshold for a sudden failure. The experiments were performed using 0.42 mm mean grain size sand in a 200 cm long, 60 cm wide and 50 cm deep rectangular flume. A numerical model was created by integrating a 2D seepage flow model and a 2D slope stability analysis model to predict the failure surface and the time of occurrence. The results showed that, the failure mode for the entire material will be sudden for slopes greater than $67^{\circ}$; in contrast the failure mode becomes retrogressive. There is no clear link between the degree of saturation and the mode of failure. The simulation results in considering matric suction showed good matching with the results obtained from experiment. A subsequent discarding of the matric suction effect in calculating safety factors will result in a deeper predicted failure surface and an incorrect predicted time of occurrence.

• Structural Engineering and Mechanics
• /
• v.86 no.6
• /
• pp.779-791
• /
• 2023

Long-termly used in water supply, an underground concrete pipe is easily subjected to the coupled action of pressure loading and flowing water, which can cause the chemo-mechanical damage of the pipe, resulting in its premature failure and lifetime reduction. Based on the leaching characteristics and damage mechanism of concrete pipe, this paper proposes a coupled chemo-mechanical damage and failure model of underground concrete pipe for water supply, including a calcium leaching model, mechanical damage equation and a failure criterion. By using the model, a numerical simulation is performed to analyze the failure process of underground concrete pipe, such as the time-varying calcium concentration in concrete, the thickness variation of pipe wall, the evolution of chemo-mechanical damage, the distribution of concrete stress on the pipe and the lifetime of the pipe. Results show that, the failure of the pipe is a coupled chemo-mechanical damage process companied with calcium leaching. During its damage and failure, the concentrations of calcium phase in concrete decrease obviously with the time, and it can cause an increase in the chemo-mechanical damage of the pipe, while the leaching and abrasion induced by flowing water can lead to the boundary movement and wall thickness reduction of the pipe, and it results in the stress redistribution on the pipe section, a premature failure and lifetime reduction of the pipe.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.90-96
• /
• 2016

This study proposes a dynamic reliability analysis of control system as a method of quantitative evaluation of its performance in probabilistic terms. In this dynamic reliability analysis, the failure event is defined as an event that the dynamic response of the structural system exceeds a displacement limit, whereas the conventional reliability analysis method has limitations that do not properly assess the actual time history response of the structure subjected to dynamic loads, such as earthquakes and high winds, by taking the static response into account in the failure event. In this first paper, we discuss the control effect of the viscous damper on the seismic performance of the member-level failure where the failure event of the structural member consists of the union set of time-sequential member failures during the earthquake excitations and the failure probability of the earthquake-excited structural member is computed using system reliability approach to consider the statistical dependence of member failures between the subsequent time points. Numerical results demonstrate that the proposed approach can present a reliable assessment of the control performance of the viscous damper system in comparison with MCS method. The most important advantage of the proposed approach can provide us more accurate estimate of failure probability of the structural control system by using the actual time-history responses obtained by dynamic response analysis.

• Knowledge Management Research
• /
• v.12 no.4
• /
• pp.121-132
• /
• 2011

Failure, the research object, means situations when goals and their results are different, which has developed presenting various aspects from ancient times and modern times. Failure is a complex concept which essentially requires judgement, and also a relative concept which can be changed depending on how you set up time base and standard. There are four stages for failure study to have been developed from studying failure through historical facts to the approach of organizational theory and it has been studied by looking at the failure of an organization according to different categories such as a developmental stage, a type of business, a period and a course. Compared with success science, failure study has not been studied sufficiently and also the level of its analysis is low. Thus, since lessons of failure tend to repeat themselves instead of being didactically accumulated, there need more studies on this. This thesis identified the main cause of the failure through various studies regarding failure which have been conducted at home and abroad. What the main cause of the failure that more than three studies mentioned have in common was that it occurred because organizations concentrated on the inside without communicating with external environment. The key point of failure study is to analyze failure, utilize it as assets, and create a frame of failure management. This thesis focused on delivering fragmentary knowledge on failure study, but case studies regarding this subject should be done in the future.