• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.51-61
• /
• 2010

Ettringite $(Ca_6[Al(OH)_6]_2(SO_4)_3{\cdot}26H_2O)$ is a sulfate mineral that shows a complicate property in concrete. It is often called as "a cancer of concrete" because secondary ettringite formation in hardened concrete often cause expansion and cracking of concrete due to its expansive crystal structure. In the present study, we tested the possibility for crystal growth inhibition of secondary ettringite by crystallization inhibitors that are commercially used for scaling inhibitors in Korea. For the test, we developed a method of ettringite solution synthesis. Three types of crystallization inhibitors were selected and examined the effects On ettringite growth inhibition. The experimental results of ettringite solution synthesis indicated that ettringite was successfully synthesized under condition that the mass balance between calcium hydroxide saturated solution and aluminum sulfate solution was attained. Monosulfate and semisulfate were synthesized when the ratio of $Ca^{2+}$ ions to ${SO_4}^{2+}$ ions was increased. The induction time of ettringite crystallization was less than 2 min. and crystallization was almost completed within an hour. The experimental results of ettringite crystallization inhibition showed that organic PBCT (2-Phosphonobutane-1,2,4-Tricarboxylic Acid) and inorganic SHMP (Sodium Hexametaphosphate) were relatively less effective on ettringite crystallization inhibition under experimental conditions. However, organic HEDP (1-Hydoxyethylidene-1,1-Diphosphonic Acid) effectively prevented ettringite growth with producing amorphous gel phase materials up to inhibitor concentration 0.1 vol.% of aluminum sulfate solution.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.451-464
• /
• 2022

The high-level nuclear waste repository is a deep geological disposal system exposed to complex environmental conditions such as high temperature, radiation, and ground-water due to handling spent nuclear fuel. Continuous exposure can lead to cracking and deterioration of the structure over time. On the other hand, the high-level nuclear waste repository requires an ultra-long life expectancy. Thus long-term structural health monitoring is essential. Various sensors such as an accelerometer, earth pressure gauge, and displacement meter can be used to monitor the health of a structure, and a piezoelectric sensor is generally used. Therefore, it is necessary to develop a highly durable sensor based on the durability assessment of the piezoelectric sensor. This study designed an accelerated life test for durability assessment and life prediction of the piezoelectric sensor. Based on the literature review, the number of accelerated stress levels for a single stress factor, and the number of samples for each level were selected. The failure mode and mechanism of the piezoelectric sensor that can occur in the environmental conditions of the high-level waste repository were analyzed. In addition, two methods were proposed to investigate the maximum harsh condition for the temperature stress factor. The reliable operating limit of the piezoelectric sensor was derived, and a reasonable accelerated stress level was set for the accelerated life test. The suggested methods contain economical and practical ideas and can be widely used in designing accelerated life tests of piezoelectric sensors.

• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.186-195
• /
• 2015

This research was conducted to investigate effect the plant growth regulators (PGRs) on the characteristics of fruit and flesh softening, using GA3 and thidiazuron (TDZ) treatments in 'Heukboseok' grapes. The total yield obtained under PGR treatment was 88.3% lower than the target production when a single treatment with $GA_3$ of low concentrations was used, but the expected yield was recovered by combined treatment with TDZ and $GA_3$. When harvested on the basis of color, the harvest rate up to 100 days after full bloom (DAFB) was low with the $GA_3$ single treatment, but was increased by the addition of TDZ, with the second TDZ mixed treatment being particularly effective. The soluble solids content in the PGR-treated samples demonstrated no significant changes after 90 DAFB, while the acidity content decreased rapidly starting from 90 DAFB. Measured on the basis of sugar and acidity content, maturity was reached much earlier in treated fruit than in the non-treated fruit. Firmness was maintained at a higher level until the final harvest time after PGR treatment compared to untreated grapes according to epidermis thickness and flesh density increase to activity cell division and expansion by $GA_3$ and TDZ. In particular, the fruit quality was improved based on the delay of softening in primary and secondary treatments of $25mg{\cdot}L^{-1}\;GA_3+2.5mg{\cdot}L^{-1}$ TDZ. The production of seedless fruit was difficult, even with the inclusion of TDZ, reaching the highest seedless rate of only 65.5%. Fruit cracking was rare, occurring at a rate of about 0.0~0.9% in all treatments. Accordingly, 'Heukboseok' grapes should be harvested within 100 days after full bloom (DBFB) before a rapid decrease of firmness, conferred by primary and secondary treatments with $25mg{\cdot}L^{-1}\;GA_3+2.5mg{\cdot}L^{-1}$ TDZ.

• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.650-655
• /
• 2009

This study was conducted to measure the quality characteristics of rough rice during low temperature drying by using an experimental dryer and heat pump with a capacity of 150kg at four temperature levels of 20, 30, 40, and $50^{\circ}C$. The quality and proper drying temperature of rough rice was investigated by measuring variations in moisture content, crack rates, germination rates and cooked rice. Temperatures over $40^{\circ}C$ is considered a high-temperature area, and below $40^{\circ}C$ is considered a low-temperature area. The drying rates were 0.3, 0.6, 0.9, and 1.3%/hr, and the crack ratios were 0, 1.6, 6.8, and 24.2% at the drying temperatures of 20, 30, 40, and $50^{\circ}C$, respectively, which showed that the higher the drying temperature was, the higher the drying rate and crack rate was. Therefore, 20 and $30^{\circ}C$ were found to be appropriate drying temperatures for avoiding crack formation, and $50^{\circ}C$ was inappropriate. At $40^{\circ}C$, the operation methods needed to be modified to limit cracking, such as increasing the tempering time. Also, as the drying temperature increased, the germination rate decreased. Germination rates at 20 and $30^{\circ}C$ were suitable for using the rough rice as a seed, and those at 40 and $50^{\circ}C$ were over 80%, which is the minimum allowable percentage. In the sensory evaluation of cooked rice, the quality of appearance, taste, and texture varied as a function of drying temperature. When considering these factors, the cooked rice that was dried at 20 and $30^{\circ}C$ was better than the cooked rice dried at high-temperature. Consequently, in view of drying temperature and rates, the best conditions for drying rough rice were below $30^{\circ}C$ and below 0.6%/hr.