• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.103-112
• /
• 1995

Six African rice varieties, two each from three types having the characteristics of partially, irregularly, and completely developed abscission layers, were selected and grown 1） to investi-gate the histological differences during the formation and development of the abscission layers and 2） to evaluate the changes in the breaking tensile strength required to detach a grain from its pedicel dur-ing ripening period in relation with developmental stage of the abscission layers. In African rice, the panicle and spikelet grew rapidly from 15 days before heading and almost completely grown in length at five days before heading. The abscission regions were recognized at 15 days before heading. However, any apparently developed abscission layers were not recognized in the lemma side for partially developed abscission layers. A group of parenchymatous cells could be observed sporadically in the abscission layers of the lemma side for irregularly developed ab-scission layers. At ten days before heading, abscission layers consisting of one or two layers of parenchymatous cells were clearly distinguished from neighboring cells due to thickened and lignified cell walls. There were a number of individual parenchymatous cells scattered sporadically in the lemma side of partially developed abscission layers, and a number of grouped parenchymatous cells scattered randomly in the lemma side of irregularly developed abscission layers. At two weeks after heading, the grains became almost fully filled. The cracking of abscission layers between rachilla and pedicel was observed, and the breaking tensile strength required to detach a grain from its pedicel was as low as that at harvest time.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.811-823
• /
• 2019

Slip form method is applied to many cases of a shaft these days because it is safer, more economical and faster than cast-in-place method. Slip-up height of the method is approximately 2.5 to 4.0 m/day. If the temperature of concrete is outside the range of 10 to 30℃, the effects of changes in strength or elastic characteristics are significant. Therefore, it is difficult for slip-up speed to be higher than 3 m/day during winter construction. In addition, concrete has heat caused by hydration, which causes temperature cracking of hardened concrete. Therefore, temperature control of concrete curing is necessary for the continuous slip-up of slip form. In this study, the rebound hardness, time of ultrasonic waves propagation, heat of hydration, and external temperature are measured by developing heating panels and test devices for the continuous slip-up. Based on this, heating slip form is manufactured; this was applied to "Kimpo sites" and "Sinwol sites". The compared slip-up speed samples were 1.9 m/day or 0.200 m/hr on average at Gimpo sites (08:00~17:30) and 2.0 m/day or 0.210 m/hr at Sinwol sites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.558-567
• /
• 2020

This study examined the defect characteristics of fuel flow proportioner-mounted structures to analyze the causes of structural defects during aircraft operation. System vibrations and single component vibrations that occur during aircraft operations are usually the cause of structural defects. The fuel flow proportioner causes a defect in the support structure due to the vibration caused by the pressure change caused by the sudden increase in the flow rate. Defects in the support structure of the fuel flow proportioner are not correlated directly with the cracking of the maneuver, and flight time according to aircraft operation analysis is related to the use of A/B. The structural reinforcement configuration was confirmed through static and life analysis of the cracks of the bracket mounted under the fuel flow proportioner for improvement of the defect. An analysis of the reinforcement revealed a minimum structural strength of +0.15. Structural life analysis confirmed that the stress acted on the site under 15Ksi. The fatigue life was confirmed to be more than 7,700 Cycles.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.919-925
• /
• 1999

Grain boundary characteristics and corrosion behavior of Alloy 600 material were investigated using the concept of grain boundary control by thermomechanical treatment(TMT). The grain boundary character distribution (GBCD) was analyzed by electron backscattered diffraction pattern. The effects of GBeD variation on intergranular at tack(JGA) and primary water stress corrosion cracking(PWSeC) were also evaluated. Changes in the fraction of coinci dence site lattice(CSL) boundaries in each cycle of TMT process were not distinguishable, but the total eSL boundary frequencies for TMT specimens increased about 10% compared with those of the commercial Alloy 600 material. It was found from IGA tests that the resistance to IGA was improved by TMT process. However, it was found from PWSCC test that repeating of TMT cycles resulted in the gradual decrease of the time to failure and the maximum load due to change in grain boundary characteristics, while the average crack propagation rate of primary crack increased mainly due to suppression of secondary crack propagation. It is considered that these corrosion characteristics in TMT specimens is attributed to 'fine tuning of grain boundary' mechanism.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.83-90
• /
• 2017

Concrete structure for nuclear power plant is mass concrete structure with large wall depth and easily permits cracking in early age due to hydration heat and drying shrinkage. It always needs cooling water so that usually located near to sea shore. The crack on concrete surface permits rapid chloride intrusion and also causes more rapid corrosion in the steel. In the study, the effect of age and crack width on chloride diffusion is evaluated for the concrete for nuclear power plant with 6000 psi strength. For the work, various crack widths with 0.0~1.4 mm are induced and accelerated diffusion test is performed for concrete with 56 days, 180days, and 365 days. With increasing crack width over 1.0mm, diffusion coefficient is enlarged to 2.7~3.1 times and significant reduction of diffusion is evaluated due to age effect. Furthermore, apparent diffusion coefficient and surface chloride content are evaluated for the concrete with various crack width exposed to atmospheric zone with salt spraying at the age of 180 days. The results are also analyzed with those from accelerated diffusion test.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.169-177
• /
• 2018

Glass fiber reinforced polyester (GFRP) composites are widely used as structural materials in harsh environment such as underground pipes, tanks and boat hulls, which requires long-term water resistance. Especially, these materials might be damaged due to delamination between gelcoat and composites through an osmotic process when they are immersed in water. In this study, GFRP laminates were prepared by surface treatment of UPE (unsaturated polyester) gelcoat by vacuum infusion process to improve the durability of composite materials used in underground pipes. The composite surface coated with gelcoat was examined for surface defects, cracking, and hardness change characteristics in water-immersion environments (different temperatures of $60^{\circ}C$, $75^{\circ}C$, and $85^{\circ}C$). The penetration depth of cracks was investigated by micro CT imaging according to water immersion temperature. It was confirmed that cracks developed into the composites material at $75^{\circ}C$ and $85^{\circ}C$ causing loss of durability of the materials. The point at which the initial crack initiated was defined as the failure time and the life expectancy at $23^{\circ}C$ was measured using the Arrhenius equation. The results from this study is expected to be applied to reliability evaluation of various industrial fields where gelcoat is applied such as civil engineering, construction, and marine industry.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.3
• /
• pp.23-33
• /
• 2012

Dynamic response measurements from natural excitation were carried out for three 18-story office buildings to determine their inherent properties. The beam-column frame system was adopted as a typical structural form, but a core wall was added to resist the lateral force more effectively, resulting in a mixed configuration. To extract modal parameters such as natural frequencies, mode shapes and damping ratios from a series of vibration records at each floor, the most advanced operational system identification methods based on frequency- and time-domain like FDD, pLSCF and SSI were applied. Extracted frequencies and mode shapes from the different identification methods showed a greater consistency for three buildings, however the three lower frequencies extracted were 1.2 to 1.7 times as stiff as those obtained using the initial FE models. Comparing the extracted fundamental periods with those estimated from the code equations and FE analysis, the FE analysis results showed the most flexible behavior, and the most simple equation that considers the building height as the only parameter correlated fairly well with test results. It is recognized that such a discrepancy arises from the fact that the present tests exclude the stiffness decreasing factors like concrete cracking, while the FE models ignore the stiffness increasing factors, such as the contribution of non-structural elements and the actual material properties used.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.171-185
• /
• 2006

A sophisticated reliability analysis method is proposed to evaluate the reliability of real nonlinear complicated dynamic structural systems excited by short duration dynamic loadings like earthquake motions by intelligently integrating the response surface method, the finite element method, the first-order reliability method, and the iterative linear interpolation scheme. The method explicitly considers all major sources of nonlinearity and uncertainty in the load and resistance-related random variables. The unique feature of the technique is that the seismic loading is applied in the time domain, providing an alternative to the classical random vibration approach. The four-parameter Richard model is used to represent the flexibility of connections of real steel frames. Uncertainties in the Richard parameters are also incorporated in the algorithm. The laterally flexible steel frame is then reinforced with reinforced concrete shear walls. The stiffness degradation of shear walls after cracking is also considered. The applicability of the method to estimate the reliability of real structures is demonstrated by considering three examples; a laterally flexible steel frame with fully restrained connections, the same steel frame with partially restrained connections with different rigidities, and a steel frame reinforced with concrete shear walls.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.540-551
• /
• 2019

This study was conducted to provide basic data for classifying patterns of land creep in 37 areas in South Korea using geological and soil property analyses. Geological time, as it relates to land creep areas in South Korea, had been most impactful for the Gyeongsang Supergroup and its sedimentary bedrock during the Cretaceous period. In this area, perfect ridge cliffs in land creeping areas included 20 plots (approximately 54.0%), while tension cracking areas with ambiguous ridge cliff characteristics included 17 plots (approximately 46.0%). Hesitant slide slope types included 20 plots (approximately 54.0%) within theslide slope of an incident pattern (slide slope figure) in land creeping areas. Colluvial debris types among land creep patterns were the most frequent and included 25 plots (approximately 68.0%). The direct causes of land creep were cutting of foothills, quarrying, land-clearing in mountains, mining exploration, and the creation of burial grounds, all of which added to geological impacts. Among land creeping areas, 27 plots (approximately 73.0%) were the result of man-made activities, and 10 plots (approximately 27.0%) were derived via natural causes such as earthquakes, heavy rainfall, and caving.

• Korean Journal of Organic Agriculture
• /
• v.27 no.1
• /
• pp.45-56
• /
• 2019

The study I was initiated in six private 'Campbell Early' vineyards in parts of Jeollanam-do province to relieve symptom of fruit blight mostly due to a high temperature occurred in Summer. High percentage of fruit blight was observed for medium growth of grape trees non-irrigated. In the study II, grape trees treated with 0%, 30% and 60% shade films were investigated for the tree responses, including fruit blight symptom in the research plots. Harvesting time was advanced approximately two weeks by the 30% shade treatment. High percentage of shades increased total shoot length per tree and decreased shoot diameter, with the greatest number of shoots observed for the 30% shade-treated grapes. Light intensity in the tree canopy was approximately 26% decreased by 30% shade treatment. Marketable harvested fruits per tree were 50.6 of 30% shade treatment, 33.6 of 0% shade, and 42.8 of 60% shade. The 30% shade treatment decreased to 11.8% of cluster blight per tree and to 11.2% of berry blight per cluster. The 30% shade treatment increased cluster weight, berry weight, soluble solid contents, and anthocyanin contents.