• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.9-15
• /
• 2011

Communication environments in the context of underwater channel are characterized to be bad by the characteristics of multipath. Multipaths are affected by various factors e.g. the temperature and the salinity of the ocean. In this paper, the representative sound speed profiles were calculated in the southern part of Baengnyeoung island so that the eigen-ray paths with the channel impulse responses were determined using the average sound speed profile of last decade. The performance of underwater communication was analyzed using the BPSK modulation and time reversal method. The significant differences of results were shown according to the change of season and carrier frequency by using computer simulation. In addition, improved performance is obtained using preprocess channel impulse response for the better comparison of two cases of summer and autumn.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.152-156
• /
• 1994

The rapid thermal annealing effects of Sol-Gel derived ferroelectric PZT thin films were investigated. It was found that rapid thermal annealing(RTA) of spin coated thin films on silicon typically >$800^{\circ}C$ for about 1 min. was changed to the perovskite phase. Rapid thermally annealed films recorded maximum remanent polarization of about 5 .mu.C/cm$^{2}$, coercive field of around 30kV/cm. The switching time for polarization reversal was about 220ns. The films of RTA process showed smooth surface, and high breakdown voltages of over 1 MV/cm and resistivity of $1{\times}{10^12}$ .ohm.cm at 1 MV/cm. It was verified that the polarization reversal of the PZT film was varied partially with applying the multiple short pulse.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.931-936
• /
• 1994

Although an ideal low-pass filter is not physically realizable, it can be approximated on the basis of time reversal techniques. In this paper, we describe a method to approximately implement the ideal low-pass filter and apply it to the pitch extraction system. Experimental results show that our method is effective to estimate the fundamental frequency of the speech signal.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.678-686
• /
• 2019

Underwater communication performance is degraded by the influence of Inter-Symbol Interference (ISI) due to multipath. Passive time reversal processing is the most effective technique for mitigating multipath, and the diversity combining method can be used to improve its performance. This paper analyzed communication performance using the beam diversity combining method, which combines signals obtained through the beam steering to various angles. Directions of arrival were estimated through the beam-time migration, which, in turn, was estimated from probe signals received by a vertical line array. The performance was analyzed based on the number and type of combinations among the estimated angles. In this paper, the data obtained from the Biomimetic Long range Acoustic Communications 2018 (BLAC18) experiment, which was conducted in the East sea, ~50 km east of Pohang, in October 2018, were used for the analysis. The output Signal to Noise Ratio (SNR) was used as communication indicators.

• ETRI Journal
• /
• v.41 no.6
• /
• pp.850-862
• /
• 2019

This work investigated three-dimensional (3D) focused microwave thermotherapy (FMT) at 925 MHz for a human tissue mimicking phantom using the time reversal (TR) principle for musculoskeletal disorders. We verified the proposed TR algorithm by evaluating the possibility of 3D beam focusing through simulations and experiments. The simulation, along with the electromagnetic and thermal analyses of the human tissue mimicking phantom model, was conducted by employing the Sim4Life commercial tool. Experimental validation was conducted on the developed FMT system using a fabricated human tissue mimicking phantom. A truncated threshold method was proposed to reduce the unwanted hot spots in a normal tissue region, wherein a beam was appropriately focused on a target position. The validation results of the simulation and experiments obtained by utilizing the proposed TR algorithm were shown to be acceptable. Effective beam focusing at the desired position of the phantom could be achieved.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.23-29
• /
• 2017

A concept of a VSA (Virtual Source Array) is the method for an acoustic spatio-temporal focus at a selected location in the outbound direction with respect to the VSA without the need of a probe source as combines a TRP (Time-Reversal Processing) and time-delay and beam-steering. However, in TRP using the VSA concept, it is limited to the critical angle and the short distances relevant to the VSA. In this paper, the waveguide invariant theory is applied to the VSA concept to refocus the received field at ranges greater other than the critical angle and the short ranges by shifting the focused field. The suggested method is verified via numerical simulation, and the results show that the robust acoustic focusing is achieved on the selected location regardless of the limitation on the conventional VSA concept.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1E
• /
• pp.38-42
• /
• 2000

In this paper we studied the reduced subjective timbre space of time-varying tones as well as steady state tones. 45 modified test tones were constructed from the original violin tone in consideration of 4 physical factors: spectrum envelope, inharmonicity, time-varying spectrum and time reversal. The semantic differential (SD) method was used in the listening test. According to the factor analysis, the adjectives can be factorized into 4 groups. The first factor is characterized by the adjectives, 'free', 'broad', 'deep', 'rich', 'strong' and 'reverberant', the second by 'tenor', 'clear', 'bright', 'light' and 'sharp', the third by 'easy', 'smooth', and 'solid', the fourth by 'warm' and 'full'. The first factor, 'richness', seems to be dependent upon the time-varying characteristic of a tone. The second factor, 'sharpness', is shown to play an important role in a time-varying tone as well as in a steady state tone.

• Smart Structures and Systems
• /
• v.15 no.1
• /
• pp.135-150
• /
• 2015

Large concrete structures are prone to cracks and damages over time from human usage, weathers, and other environmental attacks such as flood, earthquakes, and hurricanes. The health of the concrete structures should be monitored regularly to ensure safety. A reliable method of real time communications can facilitate more frequent structural health monitoring (SHM) updates from hard to reach positions, enabling crack detections of embedded concrete structures as they occur to avoid catastrophic failures. By implementing an unconventional mode of communication that utilizes guided stress waves traveling along the concrete structure itself, we may be able to free structural health monitoring from costly (re-)installation of communication wires. In stress-wave communications, piezoelectric transducers can act as actuators and sensors to send and receive modulated signals carrying concrete status information. The new generation of lead zirconate titanate (PZT) based smart aggregates cause multipath propagation in the homogeneous concrete channel, which presents both an opportunity and a challenge for multiple sensors communication. We propose a time reversal based pulse position modulation (TR-PPM) communication for stress wave communication within the concrete structure to combat multipath channel dispersion. Experimental results demonstrate successful transmission and recovery of TR-PPM using stress waves. Compared with PPM, we can achieve higher data rate and longer link distance via TR-PPM. Furthermore, TR-PPM remains effective under low signal-to-noise (SNR) ratio. This work also lays the foundation for implementing multiple-input multiple-output (MIMO) stress wave communication networks in concrete channels.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.727-732
• /
• 2014

The goal is to find the position of the sound source with the TRM at reflections and refractions environment. The Fermat's principle applied to the ray tracing method are expected to follow the acoustic path in order to obtain acoustic distance and transmittance to. Utilizing them in the TRM was confirmed rear reflectance affect on estimated position, resolution and side lobe. And the TRM performance were superior to one of the beam forming techniques.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.8-13
• /
• 1998

This work presents the way how to evaluate the degree of reversibility of the discharging process undergone by the nickel hydroxide film cathodically deposited on pure nickel as a positive electrode for electrochemical capacitor using the combined cyclic voltammetry and potential drop method, supplemented by galvanostatic discharge and open-circuit potential transient methods. The time interval necessary just to establish the current reversal of anodic to cathodic direction from the moment just after applying the potential inversion of anodic to cathodic direction, was obtained on cyclic voltammogram. The cathodic charge density passed upon dropping the applied potential, was calculated on potentiostatic current density-time curve. Both the time interval and the cathodic charge density in magnitude can be regarded as being measures of the degree of reversibility of the discharging process undergone by the positive active material for supercapacitor, i.e. , the longer the time interval is, the lower is the degree of reversibility and the greater the cathodic charge density is, the higher is the degree of reversibility. From the applied potential dependences of the time interval and cathodic charge density, discharge at $0.42 V_{SCE}$ was determined to be the most reversible.