• 한국컴퓨터산업학회논문지
• /
• 제2권3호
• /
• pp.363-368
• /
• 2001

이동통신(Mobile Telecommunication), X선 발생장치, 오존발생기, 레이저시스템 등에 사용되는 임펄스의 지속시간(pulse duration)은 충분히 짧고 빠른 상승률을 갖는 임펄스 전압을 발생시킬 수 있는 펄스발생장치(Pulse Generator)가 필요하다. 펄스발생장치 설계시 회로정수, 전력용 스위치는 임펄스 특성을 직접적으로 결정하게 된다. 펄스발생장치는 출력에너지가 순간적으로 부하에 전달될 때 최소의 손실로 전류지속시간 동안 안정성을 갖고 전류차단시 소호특성이 우수한 전력용 스위치가 요구된다. 펄스에너지 효율은 펄스 상승시간(rising time), 첨두치(peak value), 지속시간(pulse duration), 부하와의 임피던스 매칭(impedance matching) 등에 따라 민감하게 반응한다. 또한, 짧은 펄스지속시간과 높은 첨두치의 펄스에너지를 얻기 위해서는 펄스발생장치의 크기 및 경제성을 고려하지 않을 수 없다. 본 연구에서는 수$\mu$s의 펄스지속시간(pulse duration), 수 l00ns의 상승시간(rising time) 및 수 10kV의 첨두값(peak value), 수 10~100회의 반복율 갖는 안정적인 임펄스 형성을 위해 소형 펄스트랜스 2개를 조합한 cascading 방식을 적용하여 컴팩트(compact)한 펄스발생장치(pulse generator)를 구성하여 부하에 직접 제작한 임펄스를 인가한 결과 우수한 효과를 거둘 수 있었고, 그 적용에 대한 연구는 차후에 진행하고자 한다.

• 한국멀티미디어학회논문지
• /
• 제23권3호
• /
• pp.460-467
• /
• 2020

The medical service, accompanied by various disease and disease of modern people, must collect various information about patients through various tests, and demand continued to increase. As a result, interest in waiting time for medical services is rising, and various studies are underway to reduce waiting time. However, medical procedure is complex and diverse in the procedure of the services need to be conducted for each procedure. In this study, we are going to propose ways to improve the waiting time of the test procedures that are basically experienced by outpatients through the simulation experimental method. Based on the actual measurement data, the Arena Simulation program was used to implement the hospital's ophthalmic examination model and alternative model. Through this analysis, the waiting time of the examination procedure, the size of the queue, and density of the waiting room were analyzed.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.85-91
• /
• 1997

Air grinding time in grinding process has a great effect on its efficiency due to low feedrate. This paper presents a reduction methos of air grinding time in cylindrical plunge grinding operation. Tje reduction of air grinding time is accomplished by finding the distance between contact point and rising point of ultra- sonic signal of the grinding wheel to workpiece. It uses a variation of sound signal generated by the flow of coolant when the grinding wheel approaches to workpiece. The ultrasonic sensor with 23 kHz center fre- quency and 8 kHz bandwidth is used to find the nearest approaching point(NAP). Monitoring and control system of the grinding conditions is implemented with CNC controller to control feedrate override and ultrasonic sensor to find NAP. The experimental result shows that the ultrasonic signal is a good measure- ment to find NAP. But it needs the considerations for the effect of the relationship between flowrate of coolant and diameter of workpiece.

• 폴리머
• /
• 제25권4호
• /
• pp.528-535
• /
• 2001

본 연구에서는 polyol, MDI, 실리콘 유화제, 물을 기본 폴리우레탄 조성으로 설정하였으며, 경질 폴리우레탄 폼에 있어서 sitff-chain 요소인 에틸렌 글리콜의 첨가에 의하여 가교밀도가 증가하며, 이에 따른 셀의 크기, 발포 배율, cream time, gel time, take free time의 변화, 최종 자유 발포체 높이, 반응 온도, 단열도 변화를 관찰하였다. 발포제는 시클로펜탄을 사용하여 경질 물리우레탄을 발포하였으며, 상온, 상압에서 hand mixing 으로 5000 rpm, 4sec의 범위 안에서 혼합시킨 뒤에, 에틸렌 글리콜의 양을 변화시켜 200 ${\times}$ 200 ${\times}$ 200 mm 내의 나무 금형 안에서 발포 실험하였다. 이소시아네이트 인덱스를 고정시켰을 경우 에틸렌글리콜의 양이 증가함에 따라 셀의 크기는 약 5.1%와 열전도는 약 14%가 감소하였다.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.139-144
• /
• 2005

Because of the photorefractive recording dynamics, each newly recorded hologram partially erases all previously stored image. Thus achieving the desired diffraction efficiency profile for the entire sequence after all images have been recorded requires exposure time schedule. The often cited classical exposure-schedule model predicts a rising-exponential build-up and an exponential decay in An with an exposure time. However because we cannot directly measure the An, it's difficult to establish the relation of both. In this paper, we deduce the relation of diffraction efficiency and exposure time from experiment data and suggest an algorithm to make time schedule profile in angle/fractal multiplexing of holographic data storage. After that, we present simulated result with equal hologram diffraction efficiency for a sequence of 250 holograms recorded by angle/fractal multiplexing.

• 한국측량학회지
• /
• 제35권5호
• /
• pp.329-338
• /
• 2017

This study attempts to classify 1008 alley markets in Seoul through cluster analysis using Dynamic Time Warping, one of the methods used to analyze the similarity of time series, and evaluate the possibility of opening new stores. The sequence of the gross sales of an alley market and that of gross sales per store stand for the potential of growth and profitability of the market, respectively and are used as variables for cluster analysis. Five clusters are obtained for the gross sales and four clusters for the gross sales per store. These two types of clusters are again classified as rising and falling trends, respectively, and the combination of these trends produces four categories. These categories are used to evaluate the possibility of opening new stores in alley markets. The results show that the southeast which is relatively wealthy inferior to other regions in opening new stores. Alley markets in the northeast and the southwest are better than other regions such that opening a new store is justified. In the northwest, there are many markets with trend of gross sales and that of gross sales per store moving in opposite directions, and new store openings in these markets should be postponed.

• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.179-187
• /
• 2024

In this paper, a unified time-dependent constitutive model of Darcy flow and non-Darcy flow is proposed. The influencing factors of flow velocity are discussed, which demonstrates that permeability coefficient is the most significant factor. Based on this, the dynamic evolution characteristics of water inrush during tunneling through fault fracture zone is analyzed under the constant permeability coefficient condition (CPCC). It indicates that the curves of flow velocity and hydrostatic pressure can be divided into typical three stages: approximate high-velocity zone inside the fault fracture zone, velocity-rising zone near the tunnel excavation face and attenuation-low velocity zone in the tunnel. Furthermore, given the variation of permeability coefficient of the fault fracture zone with depth and time, the dynamic evolution of water flow in the fault fracture zone under the variable permeability coefficient condition (VPCC) is also studied. The results show that the time-related factor (α) affects the dynamic evolution distribution of flow velocity with time, the depth-related factor (A) is the key factor to the dynamic evolution of hydrostatic pressure.

• 동력기계공학회지
• /
• 제11권3호
• /
• pp.66-72
• /
• 2007

This study proposed new method to decide the reference model necessary for design PID controller. In generally, control design problems using the reference model have the following two factors. One factor is that numerical model of the controlled system can be obtained extremely, and the other is that specification for the closed-loop dynamic performance is pure moderate. Therefore, the control design procedure is essentially based on the partial reference model matching which offers a reasonable method to simplify the design and the controller configuration under the controlled system uncertainty. ITAE(Integral of time-multiplied absolute error) performance index and Kitamori method etc. which were used a reference model method had a limit to settling time and rising time of reference model that it arrived to steady state response according to the controlled system. On this study, if it only knew peak time of overshoot and settling time by measurement signal of the controlled system, it can be made the reference model easily. We proposed new method to improve performance index of the reference model superior to existing reference model index and illustrate the numerical simulation results to show the effectiveness of proposed control method design.

• 한국가시화정보학회지
• /
• 제6권1호
• /
• pp.41-46
• /
• 2008

In this paper, the recirculation flow motion and mixing characteristics driven by air bubble stream in a rectangular water tank is studied. The time-resolved PIV technique is adopted for the quantitative visualization and analysis. 488 nm Ar-ion CW laser is used for illumination and orange fluorescent ($\lambda_{ex}=540nm,\;\lambda_{em}=560nm$) particle images are acquired by a PCO 10bit high-speed CCD camera (1280$\times$1024). To obtain clean particle images, 545 nm long pass optical filter and an image intensifier are employed and the flow rates of compressed air is 3 l/min at 0.5 MPa. The recirculation and mixing flow field is further investigated by time-resolved POD analysis technique. It is observed that the large scale recirculation resulting from the interaction between rising bubble stream and side wall is the most dominant flow structure and there are small scale vortex structures moving along with large scale recirculation flow. It is also verified that the sum of 20 modes of velocity field has about 67.4% of total turbulent energy.

• Elastomers and Composites
• /
• 제50권1호
• /
• pp.13-17
• /
• 2015

A study of the effects of MWCNT as a nucleating agent on the formation reactions of the rigid polyurethane foams (RPUFs) was carried out. Sample PUFs, formulated with grease-type master batch of MWCNT/surfactant, were fabricated by free-rising method. Temperature changes with time during foaming process were measured using a digital thermometer. RPUF foaming process was observed to undergo 2-step processes with temperature inflection around 60 sec after the start of reaction, and then reached slowly the max. temperature. While the max. temperature of neat PUF was measured as ca. $120^{\circ}C$, that of the samples with MWCNT were as higher value as ca. $130^{\circ}C$, and, even the time to reach that temperature was reduced by about 15 sec. Average cell size of PUF samples decreased from 185.1 for the neat PUF to $162.9{\mu}m$ for the sample of 0.01 phr of MWCNT. As the result, it was considered that MWCNT in RPUF foaming process could play a roll both as a nucleating agent and as a catalyst.