• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.430-439
• /
• 2007

In this paper, we propose a broadband TEM horn antenna optimized using a genetic algorithm. The characteristics required for the TEM horn are the broad matching bandwidth from 2 GHz to 10 GHz and high gain in broadside with a small gain deviation within that bandwidth. In addition, a broadband balun is designed to improve the portability and to reduce the total size of the antenna. The measured return loss of the proposed TEM horn with the broadband balun is less than -10 dB(VSWR<2) from 2 GHz to 10 GHz. Compared to a conventional triangular type TEM horn, the proposed antenna shows about 80 % reduced volume and gives the broadside gain about 12 dBi with a gain deviation less than 6 dB from 2 GHz to 10 GHz. The time domain measurement shows less than 0.4 ns group delay and the pulse measurement using the transmitting signal with the rising time of 58.5 ps shows the received pulse with the rising time of 66.5 ps, which is less than 10 % rising time variation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.9-15
• /
• 2018

According to the development and use of self-consolidating concrete in field, interest in material properties of early-age concrete is rising. Setting time with hydration process of cement is one of significant indicator to evaluate the early-age material properties of concrete, various nondestructive methods including penetration resistance measurement have been proposed to estimate setting time. This study performed an experimental approach to evaluate setting time delay in mortar adding superplasticizer using electrical resistivity measurement. For this purpose, total nine types of mortar samples were prepared, and its electrical resistivity was monitoring during 24h after mixing. From the experimental result, rising time of electrical resistivity was used to evaluate setting delay of mortar, and penetration resistance was also measured for comparison. In addition, dynamic elastic modulus and compressive strength of 1day mortar were measured to investigate a possibility the use of electrical resistivity measurement for evaluation of early-age material properties.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.560-568
• /
• 2005

The proposed Multi-level PDP sustain Driver is composed of the semiconductor devices with low voltage rating compared to those used in the prior circuit proposed by L. Wether, and it has two resonant periods during the charging (rising period) and discharging (falling period) the PDP in the sustaining voltage waveforms. In accordance with the change of timing phase$(T_{r1},\;T_{i1},\;T_{r2})$, the performance characteristics of a commercial PDP module has been carried out and compared the characteristic with the 42V6, made of LG Electronics co., Experimental results show that the performance characteristics of PDP module are greatly influenced by the variation of $T_{i1}\;and\;T_{r2}$. The variation of $T_{r1}$ do not influence much on the performances of PDP. With the conditions that $T_{r1}=60ns,\;T_{i1}=120ns,\;and\;T_{r2}=350ns$, we could get the performances listed as the luminance is increased $14.6\%$, the power consumptions is decreased $5.9\%$, the panel efficiency is increased $24.2\%$, module efficiency is increased $21.2\%$, compared to those shown in the commercial PDP module (42V6). Therefore, the proposed multi-level PDP sustain driver expected to be suitable to actual PDP module application.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.130-139
• /
• 2023

With the increasing popularity of computer-generated virtual influencers, the trend is rising especially on social media. Famous virtual influencer characters Lil Miquela and Imma were all created by CGI graphics workflows. The process is typically a linear affair. Iteration is challenging and costly. Development efforts are frequently siloed off from one another. Moreover, it does not provide a real-time interactive experience. In the previous study, a real-time graphic workflow was proposed for the Digital Actor Hologram project while the output graphic quality is less than the results obtained from the CGI graphic workflow. Therefore, a real-time engine graphic workflow for Virtual Influencers is proposed in this paper to facilitate the creation of real-time interactive functions and realistic graphic quality. The real-time graphic workflow is obtained from four processes: Facial Modeling, Facial Texture, Material Shader, and Look-Development. The analysis of performance with real-time graphical workflow for Digital Actor Hologram demonstrates the usefulness of this research result. Our research will be efficient in producing virtual influencers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.128-135
• /
• 2013

This paper presents a high dimming ratio Power-LED driver IC with high power which is capable of controlling LEDs. In order to accomplish a high dimming ratio LED driver, the preloading inductor current methodology is proposed for the power stage of the proposed method to achieve the fast transient response time during the Power-LED load switching. The information containing the current flowing on the LEDs can be utilized to predict the amount of the current on the inductor. The minimum LED current rising time of existing high dimming ratio Power-LED driver is limited by $3{\mu}s$, however that of the proposed high dimming ratio Power-LED driver is reduced about 1/10. The LED driver is implemented with 0.35um 60V BCDMOS 2-poly 4-metal process. The measurement results show that the proposed LED driver system features the minimum rising time as small as 240ns at the dimming frequency of 1KHz with a 12V of input voltage, nine white LEDs and 353mA of LED current. The LED rising time and power conversion efficiency of the chip are measured to be 240ns and 93.72%, respectively.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.467-479
• /
• 2009

The purpose of this study was to present the quantitative data which riders can utilize teaching field by comparison analysis of kinematics according to skill level of rider during 2 strides rising trot with the JeJu's-Horse. Participated subjects was consisted of total 10 riders(unskilled: n=5, skilled: n=5). The method of experiment & analysis was based on 3D cinematography. Variables were consisted of temporal, linear & angular kinematics by each event & phase. The skilled assigned more ratio of elapsed time in air than support phase, had the less range of motion in up-down direction and more consistent velocity in lateral & forward direction and performed periodic up-down movement with alignment in vertical direction according to elapsing of phases. The skilled more flexed at elbow and extended backwardly according to elapsing of phases, while more flexed forwardly at hip & knee and plantarflexion at ankle. The skilled postured backward extension but the unskilled do forward flexion. That is, It was considered that the unskilled continued more unstable posture than the skilled during 2 strides in rising trot.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.183-183
• /
• 2008

This paper presents the time responses of calcium ($Ca^{2+}$) ion concentration of MG-63 cells induced by a constant shear stress in micro channel were observed in the real time. Most of cells have similar rising time. There were some time delays because of the initial position of the cell in the micro channel along the pressure-driven fluid flow. The concentration of $Ca^{2+}$ exponentially decreased while time constant of each profile did not have any relation to the peak value of concentration.

• Korea journal of population studies
• /
• v.31 no.1
• /
• pp.99-125
• /
• 2008

This article aimed to clear that the systematic bias according to the length of work time exists between estimated work time by self-reported questions used mainly in measuring and calculating the length of work time because of strong points of easy in measuring and so on and diary work time by time-diary method used because of the strong point that can measure more accurate lifetime by recording various activities of respondents during 24 hours in the stream. As the result that analyze the data from Lifetime Use Survey in 2004, the result like the contradiction came that the tendency of overstating work time is rising according as estimated work time increases via estimated work time, whereas the tendency of understating work time is rising according as diary work time increases via diary work time. The reason that the opposite results come despite the data from the same survey is that random errors act in the opposite directions by regression to the mean. Therefore, we cannot emphasize that a man working long hours tends to exaggerate his work hours by the result via estimated work time. That is, the fact that the systematic bias by the increase of work time does not exist is confirmed, and therefore, it is also impossible to raise questions about the accuracy of the data through estimated work time by self-reported questions from the evidence of the existence of that bias.

• Structural Monitoring and Maintenance
• /
• v.2 no.1
• /
• pp.49-64
• /
• 2015

This paper presents a method for assessing the risk of wave run-up and overtopping of existing coastal defences and for analysing the probability of failure of the structures under future hydraulic conditions. The recent UK climate projections are employed in the investigations of the influence of changing environments on the long-term performance of sea defences. In order to reduce the risk of wave run-up and overtopping caused by rising sea level and to maintain the present-day allowances for wave run-up height and overtopping discharge, the future necessary increase in crest level of existing structures is investigated. Various critical failure mechanisms are considered for reliability analysis, i.e., erosion of crest by wave overtopping, failure of seaside revetment, and internal erosions within earth sea dykes. The time-dependent reliability of sea dykes is analysed to give probability of failure with time. The results for an example earth dyke section show that the necessary increase in crest level is approximately double of sea level rise to maintain the current allowances. The probability of failure for various failure modes of the earth dyke has a significant increase with time under future hydraulic conditions.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.2
• /
• pp.72-78
• /
• 2001

A compact size high voltage pulse generator with nanosecond rise time has been designed and investigated experimentally. The inductance of a pulse generator can be reduced by fixing the Marx generator and pulse forming network components into a single cylindrical unit. As a result, nanosecond rise time about $8{\sim}10[ns]$ and pulse width of several hundred [ns] can be obtained from a modified Marx pulse generator. And parametric studies showed that the rise time of the output pulse was depended little on the change of the load resistance and the charging capacitance while, the pulse width of the output pulse was depended greatly upon the change of the load resistance and the charging capacitance. The theoretical showed the possibility to design the laboratory-size pulse generator very fast rising time and a proper pulse width by minimizing stray inductance and varying resistance and capacitance.