• Journal of the Korean Data and Information Science Society
• /
• 제26권4호
• /
• pp.997-1006
• /
• 2015

In industrial quality control, when engineers use VSI control procedure they should consider both required time to signal and switching behaviors together in the case of production process changed. Up to the present, many researchers have studied fixed sampling interval (FSI) chart and variable sampling interval (VSI) chart in the points of average number of samples to signal (ANSS) and average time to signal (ATS). However, ANSS and ATS do not provide any switching information between different sampling intervals of VSI schemes. In this study, performances of two sampling intervals VSI chart and three sampling intervals VSI chart are evaluated and compared. The numerical results show that ANSS and ATS values of two sampling intervals VSI chart and three sampling interval VSI chart are similar regardless the amount of shifts. However, the values of switching behaviors including ANSW are less efficient in three sampling intervals VSI charts than in two sampling intervals VSI chart.

• 한국ITS학회 논문지
• /
• 제19권3호
• /
• pp.14-27
• /
• 2020

우리나라 교통사고 사망자 중 보행자 사망이 높은 비율을 차지하고 있어, 정책적으로 보행안전에 대한 관심이 높아지고 있다. 하지만 보행신호시간 계획의 경우 보행 편의 및 신호주기를 고려하지 않고 횡단보도 길이를 기준으로 보행신호시간을 적용하다 보니, 신호기가 설치된 폭이 좁은 부도로 횡단보도의 경우, 횡단거리에 비해 상대적으로 보행대기시간이 길어 보행자의 무단횡단을 유발하고 있다. 본 연구에서는 신호기가 설치된 부도로 횡단보도 중 불합리한 신호시간 계획으로 인해 보행자의 무단횡단이 많은 교차로를 대상으로 보행신호를 1주기 2회 부여하고 신호체계에 따른 운영적·안전적 효과를 정량적, 정성적으로 비교 분석하였다. 그 결과, 무단횡단과 보행대기시간이 감소하는 것으로 나타났으며, 보행신호시간 적용간격이 짧을수록 무단횡단은 감소하는 것으로 분석되었다. 다만, 보행자 노출에 따른 차량 상충위험이 있어 보행신호 1주기 2회 부여 운영에 대한 안전성 확대 방안을 제시하였다.

• ETRI Journal
• /
• 제41권5호
• /
• pp.658-669
• /
• 2019

For dual-channel time-frequency (TF) overlapped signals with low sparsity in underdetermined blind source separation (UBSS), this paper proposes an effective method based on interval probability to estimate and expand the types of mixing matrices. First, the detection of TF single-source points (TF-SSP) is used to improve the TF sparsity of each source. For more distinguishability, as the ratios of the coefficients from different columns of the mixing matrix are close, a local peak-detection mechanism based on interval probability (LPIP) is proposed. LPIP utilizes uniform subintervals to optimize and classify the TF coefficient ratios of the detected TF-SSP effectively in the case of a high level of TF overlap among sources and reduces the TF interference points and redundant signal features greatly to enhance the estimation accuracy. The simulation results show that under both noiseless and noisy cases, the proposed method performs better than the selected mainstream traditional methods, has good robustness, and has low algorithm complexity.

• 한국항공운항학회지
• /
• 제14권4호
• /
• pp.87-93
• /
• 2006

The black-tailed gull chicks, Larus crassirostris, recognize various adult voice signal base on the simple patterns. We investigated behavior change in black-tailed gull chicks through physical manipulation of mew call. They were playback in four situations differing in physical character: 1) frequency manipulation only, 2) duration manipulation only, 3) call intensity(dB) manipulation only, and 4) call interval manipulation only. We observed occurrence of different response of the chicks, which were categorized into two behaviors(hidden and return behavior). The manipulated frequency, duration, and intensity were directly correlated. The chicks exposed to only manipulated call interval(0.5, 1sec) made significantly more hidden and return behavior. Adult black-tailed gull only increased flight time on manipulated call interval. The results suggest that black-tailed gulls use short call interval for alarm signal. The analysis of alarm signal provides an important on basic study of bird strike.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.56-63
• /
• 2023

In this study, the vibration signal of the mold was measured and analyzed to monitor the process information and characteristics during the press molding process. A necklace-type picture frame mold was used for press molding, and the vibration signal was measured by GY-61 acceleration sensor module attached to the surface of the upper (movable) mold base. The change of the vibration signal of the mold according to press speed was analyzed. As a result, the vibration signal had a large change at five sections: "Holder contact", "Punch contact and start of pressing", "End of pressing", "Mold open", and "Demolding". The time difference between "Punch contact and start of pressing" and "End of pressing" means the pressing time which is the actual time the material is molded under pressing pressure. The time intervals for each section, represented by the time interval between "Holder contact" and "Punch contact and start of pressing", can be used to compare and evaluate the press speed applied to the process. By comparing the vibration signals at 60 rpm and 90 rpm, the amplitude at the section of "Punch contact and start of pressing" increased as the press speed increased. This result means that as the press speed increases, more force and pressure is applied to the material. Also, the peak values of the other sections were found to increase as the press speed increased. It was found that the pressing time, the time interval between "Punch contact and start of pressing" and "End of pressing", decreases as the pressing speed increases. Similarly, press speed factor, the time interval between "Holder contact", and "Punch contact and start of pressing", is found to be shorter. Therefore, based on the result of this study, the pressing time, press speed, pressing(punching) pressure of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process information and characterization can be evaluated as the change of the mold vibration during press molding.

• 대한교통학회지
• /
• 제12권1호
• /
• pp.55-73
• /
• 1994

The objective of this research is to evaluate the pedestrian signal time involving green and flashing green times. The minimum pedestrian green indication should give time for pedestrian to start crossing safely, and the flashing green indication should give time to complete the crossing. An average pedestrian crossing speed of 1.1(m/s) was estimated by analyzing the field data which was slower than the 1.2(m/s) currently used. Furthermore, the study proposed that design speed for the flashing green time should be slow speed for considerations pedestrian safety, not the average speed. The 0.78-1.01(m/s) of pedestrian speed was estimated at the elementary school areas that indicated 0.2(m/s) slower than the other areas. The pedestrian starting time (perception/reaction time) and time headway from front to back of herd was estimated to determine minimum pedestrian green time. the pedestrian starting time was estimated to determine minimum pedestrian green time. The pedestrian starting time was ranged 2.52-4.29 seconds. The time interval between the pedestrian rows was found to be 1.25-1.86 seconds, which declines as the pedestrian rows increases, The equation to calculate the pedestrian signal, which declines as the pedestrian rows increases. The equation to calculate the pedestrian signal time is proposed using the pedestrian starting time, the time interval between the pedestrian rows, and pedestrian crossing speed given area types (commercial, business, mixed, and elementary school areas), number of both-directional pedestrians for a cycle, crosswalk length and width.

• Journal of the Korean Data and Information Science Society
• /
• 제16권3호
• /
• pp.639-650
• /
• 2005

Theoretical and numerical comparison have shown that variable sampling interval (VSI) charts are substantially more efficient than fixed sampling interval(FSI) charts in term of ATS(average time to signal). But the frequency of switching between different sampling intervals is a complicating factor in VSI procedures. VSI EWMA charts for monitoring mean vector of related qualify characteristics are investigated. To compare the efficiencies of the proposed charts, the performances are evaluated for matched FSI and VSI charts in terms of average time to signal(ATS) and average number of samples to signal(ANSS). For the switching behavior of the proposed VSI charts, average number of switches(ANSW) are also investigated.

• Journal of the Korean Data and Information Science Society
• /
• 제20권4호
• /
• pp.741-747
• /
• 2009

Properties of multivariate Shewhart and EWMA (Exponentially Weighted Moving Average) control charts for monitoring variance-covariance matrix of quality variables are investigated. Performances of the proposed charts are evaluated for matched fixed sampling interval (FSI) and variable sampling interval (VSI) charts in terms of average time to signal (ATS) and average number of samples to signal (ANSS). Average number of swiches (ANSW) of the proposed VSI charts are also investigated.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.520-521
• /
• 2017

일반적인 카운터 타입의 시간-디지털 변환기에서 시간간격 신호와 클록신호의 비동기로 인하여 디지털 변환에러가 발생한다. 클록의 주기를 $T_{CLOCK}$라고 하면, 시간간격 신호의 시작신호와 클록의 비동기로 인하여 최대 $T_{CLOCK}$의 변환에러가 발생한다. 그리고 시간간격 신호의 멈춤신호와 클록의 비동기로 인하여 최대 $-T_{CLOCK}$의 변환에러가 발생한다. 그러나 시작신호와 클록을 동기화하고 클록을 시간간격 신호동안 발생시킬 경우 디지털 변환에러의 범위는 0에서 $(1/2)T_{CLOCK}$이다.

• 한국전자통신학회논문지
• /
• 제8권3호
• /
• pp.397-402
• /
• 2013

다중센서를 이용한 상황인식에서 시간변화는 고려해야 하는 요소이다. 센서가 감지하여 보고한 정보를 바탕으로 상황추론에 도달하고자 하는 경우, 일정 시간 간격별로 묶어서 검토하는 것이 유용하다. 본 논문에서는 시간경과를 고려하는 클러스터링 기법을 이용한 다중센서 데이터융합을 제안한다. 각 센서별로 일정시간 간격동안 수집되어 보고된 센싱 정보를 묶어 1차 데이터융합을 실시하고 그 결과를 대상으로 다시 2차 데이터융합을 실시하였다. Dempster-Shafer이론을 이용하여 다중센서 데이터융합을 실시하고 그 결과를 분석하여 상황을 추론하는데 시간간격을 기준으로 세분화시켜 평가하고 이것을 다시 융합함으로써 향상된 상황 정보를 추론할 수 있다.