• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.465-474
• /
• 2006

A gas fueling system composed of a gas reservoir, an on-off valve, and a gas transferring tube, which is the simplest construction for the pre-programmed gas puffing, was simulated by numerically solving the time-dependent one-dimensional gas flow equation. The purpose of the simulation is to establish the relationship between the gas flow pattern (the elapsed time to the maximum flow, the maximum flow rate, the gas pulse duration) and the system parameters (the filling pressure and the volume of the gas reservoir, and the length and the diameter of the gas transferring tube).

• Food Science and Biotechnology
• /
• v.15 no.6
• /
• pp.871-876
• /
• 2006

Rheological behavior of commercial hot pepper-soybean paste (HPSP) was evaluated in small amplitude oscillatory and steady shear tests. Storage modulus (G'), loss modulus (G"), and complex viscosity (${\eta}^*$) as a function of angular frequency (${\omega}$), and shear stress (${\sigma}$) as a function of shear rate (${\gamma}$) data were obtained for 5 commercial HPSP samples. HPSP samples at $25^{\circ}C$ exhibited a non-Newtonian, shear-thinning flow behavior with high yield stresses and their flow behaviors were described by power law, Casson, and Herschel-Bulkley models. Time-dependent flow properties were also described by the Weltman, Hahn, and Figoni & Shoemaker models. Apparent viscosity over the temperature range of $5-35^{\circ}C$ obeyed the Arrhenius temperature relationship with activation energies (Ea) ranging 18.3-20.1 kJ/mol. Magnitudes of G' and G" increased with an increase in ${\omega}$, while ${\eta}^*$ decreased. G' values were higher than G" over the most of the frequency range (0.63-63 rad/sec), showing that they were frequency dependent. Steady shear viscosity and complex viscosity of the commercial HPSP did not fit the Cox-Merz rule.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.54-61
• /
• 2004

The engine-out flow is highly transient and hot, and may place tremendous thermal and inertial loads on a closed-coupled catalyst. Therefore, time-dependent and detailed flow and thermal field simulation may be crucial. The aim of this study is to develop combined chemical reaction and multi-dimensional fluid dynamic mathematical model and to study the effect of unsteady pulsating thermal and flow characteristics on thermal reliability of closed-coupled catalyst. The effect of cell density on the conversion performance under real running condition is also investigated. Unlike previous studies, the present study focuses on coupling between the problems of pulsating flow pattern and catalyst thermal response and conversion efficiency. The results are expressed in terms of temporal evolution of flow, pollutant and temperature distribution as well as transient characteristics of conversion efficiency. Fundamental understanding of the flow and thermal phenomena of closed-coupled catalyst under real running condition is presented. It is shown that instants of significantly low values of flow uniformity and conversion efficiency exist during exhaust blowdown and the temporal varaition of flow uniformity is very similar in pattern to one of conversion efficiency. It is also found that the location of hot spot in monolith is directly affected by transient flow pattern in closed-coupled catalyst.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.411-416
• /
• 1999

The measurement of unsteady flow rate is of vital importance to clarify and improve the dynamic characteristics in pipeline, hydraulic components and system. There is also demand for a real time flow sensor of ability to measure unsteady flow rate with high accuracy and fast response to realize feedback control of flow rate in fluid power systems. In this paper, we propose an approach for estimating unsteady flow rate through a pipeline and components under high pressure condition. In the method, unsteady flow rate is estimated by using hydraulic pipeline dynamics and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-checking functions of the method, the validity is investigated by comparison with the measured and estimated pressure waveforms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate waveforms and theroetical those under unsteady laminar flow conditions. the method proposed here is useful in estimating unsteady flow rate through an arbitray cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

• Journal of the Korean Ceramic Society
• /
• v.24 no.3
• /
• pp.289-295
• /
• 1987

The changes of physical properties of portland cement pastes and mortars were investigated by addition of sodium gluconate. Flow table experiment and viscosity measurement were took in order to find dispersing effect, and time-dependent changesof viscosity and rates of hydration heat evolution were carried out for the sake of finding retardation effect of hydration. And changes of physical properties of cement pastes and mortars were discussed by setting time, compressive strength and porosity.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1886-1896
• /
• 2019

Modern small modular nuclear reactors can be built on a barge in ocean, therefore, their flow characteristics depend upon the ocean motions. In the present research, effect of rolling motion on flow and friction characteristics of laminar flow through vertical and horizontal narrow channels has been studied. A computer code has been developed using MPS method for two-dimensional Navier-Stokes equations with rolling motion force incorporated. Numerical results have been validated with the literature and have been found in good agreement. It has been found that the impact of rolling motions on flow characteristics weakens with increase in flow rate and fluid viscosity. For vertical narrow channels, the time averaged friction coefficient for vertical channels differed from steady friction coefficient. Furthermore, increasing the horizontal distance from rolling pivot enhanced the flow fluctuations but these stayed relatively unaffected by change in vertical distance of channel from the rolling axis. For horizontal narrow channels, the flow fluctuations were found to be sinusoidal in nature and their magnitude was found to be dependent mainly upon gravity fluctuations caused by rolling.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.955-958
• /
• 2002

A workflow is a flow of work supported by computers. An instance of a workflow is called case. Companies need to constantly refine their current workflows in order to meet various requirements. The change of current workflows is called dynamic change of the workflow. Since Ellis et al. proposed three change types, Flush, Abort, and Synthetic Cut-Over in 1995, various change types have been proposed. A promising change type is Migrate proposed by Sadiq et al., because Migrate changes workflow definitions immediately and makes the redo of cases minimum. However, the formal modeling and time-dependent analysis of Migrate has not been done. This paper proposes a method of computing change time of Migrate dynamic changes for time-dependent analysis. Change time is a measure for evaluating dynamic changes. We first show a Petri-nets-based model of Migrate dynamic changes. Then we present a method of computing change time based on the net model. Finally, we apply the method to 270 examples, and show experimental results, and comparison with Ellis et al..'s three change types.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.57-68
• /
• 1998

Work environments have been changed with the advent of new technologies, such as computer technology. However, human cognitive limits can't pace up with the change of work environment. Designing human-computer system requires knowledge and evaluation of the human cognitive processes which control information flow workload. Futhermore, under limited reaction time and/or urgent situation, human operator may the work stress, work error and resultant deleterious work environment. This paper evaluate the visual factors of major information processing factors(information density, amount of information, operational speed of speed)on operator performance of supervisory control under urgent(limited reaction time)environments which require deleterious work condition. To describe the work performance int the urgent work situations with time stress and dynamic event occurrence, a new concept of information density was introduced. For a series of experiments performed for this study, three independent variables(information amount, system proceeding speed, information density) were evaluated using five dependent variables. The result of statistical analyses indicate that the amount of information affected on all of five dependent measure. Number of failure and number of secondary task score were influenced by both amount of information and operational speed of system. However reaction time of secondary task were affected by both amount of information and information density. As a result, the deleterious factors for the performances seemed to be a scanning time to supervise each control panel. Consequently, a new display panel was suggest to reduce operator work load for scanning task showing better operator performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1088-1094
• /
• 2002

A channel flow with a high Reynolds number but coarse grids is numerically studied to investigate the prediction possibility of its turbulence which is three-dimensional and time-dependent. In the present paper, a Reynolds-Averaged Navier-Stokes (RANS) model, a Large Eddy Simulation (LES) and a Navier-Stokes equation with no model are tested with a new approach of hybrid RANS/LES, which reduces to RANS model in the boundary layers and at separation, and to Smagorinsky-like LES downstream of separation, and then compared with each other. It is found that the simulations of hybrid RANS/LES method sustain turbulence like those of LES and with no model, and the results are stable and fairly accurate. This indicates strongly that gradual improvements could lead to a simple, stable, and accurate approach to predict turbulence phenomena of wall-bounded flow.

• Journal of the Korean Mathematical Society
• /
• v.48 no.6
• /
• pp.1153-1170
• /
• 2011

In this paper, spatial decay estimates for the time dependent compressible viscous isentropic flow in a semi-infinite three dimensional pipe are derived. An upper bound for the total energy in terms of the initial boundary data is obtained as well. The results established in this paper may be viewed as a version of Saint-Venant's principle in transient compressible Navier-Stokes flow.