• Ocean and Polar Research
• /
• 제37권1호
• /
• pp.11-22
• /
• 2015

In-situ measurements are labor-intensive, time-consuming, and limited in their ability to observe currents with spatial variations in the surf zone. This paper proposes an optical image-based method of measurement of currents in the surf zone. This method measures nearshore currents by tracking in time wave breaking-induced foam patches from sequential images. Foam patches in images tend to be arrayed with irregular pixel intensity values, which are likely to remain consistent for a short period of time. This irregular intensity feature of a foam patch is characterized and represented as a keypoint using an image-based object recognition method, i.e., Scale Invariant Feature Transform (SIFT). The keypoints identified by the SIFT method are traced from time sequential images to produce instantaneous velocity fields. In order to remove erroneous velocities, the instantaneous velocity fields are filtered by binding them within upper and lower limits, and averaging the velocity data in time and space with a certain interval. The measurements that are obtained by this method are comparable to the results estimated by an existing image-based method of observing currents, named the Optical Current Meter (OCM).

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.695-701
• /
• 2008

In this paper, we propose the efficient Doppler removal method using map-based partial-time common intermediate frequency removal technique. In the proposed algorithm, the 2-stage carrier removal process was used. First, the component of common intermediate frequency is removed. Next the component of Doppler was removed with averaging and approximation. For the evaluation of the proposed algorithm, The real-time software GPS L1 C/A-code receiver was implemented. When the proposed algorithms are used, 12 tracking channels with 3 track arm(early, prompt, late) is operated real-time on PC using a Intel Pentium-III 1.0GHz CPU. Also, the requirement of memory was less than 2Mbytes. The real-time software GNSS receiver using the proposed algorithms provides the navigation solution with below 10 meter rms error. Especially, in spited of using the various approximations for implementing the algorithms, the high sensitivity capability (able to track the weak signal with -159dBm) was achieved.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.21-27
• /
• 2021

The financial sector is one of the most important building blocks of the economy. When this sector efficiently implemented a well-crafted program on banking and financial system to translate financial activities to income-generating activity, economic growth will be realized. Hence, this study analyzed the effect of financial intermediation on economic growth and the existence of cointegrating relationship using time-series data from 1986 to 2015. The influence of financial intermediation in terms of bank credit to bank deposit ratio, private credit, and stock market capitalization and time trend to economic growth was estimated using ordinary least squares (OLS) multiple regression. The results showed that all the financial intermediation indicators and time trend exert significant effect on Gross Domestic Product (GDP) per capita. The positive sign of the time trend indicates that there is an upward trend in GDP per capita averaging approximately 0.06 percent annually. Furthermore, the cointegration test using the Johansen procedure revealed that there is a presence of long-term equilibrium relationship between financial intermediation and time trend and economic growth, and rules out spurious regression results. This study established the idea that financial intermediation in the Philippines has a significant and vital role in stimulating growth in the economy.

• 한국농공학회논문집
• /
• 제58권4호
• /
• pp.37-46
• /
• 2016

This study is to estimate COMS (Communication, Ocean and Meteorological Satellite) daily land surface temperature (LST) of Korea Peninsula from 15 minutes interval COMS LST (COMS LST-15) satellite data. Using daily observed LST data of Automated Agriculture Observing System (AAOS) 11 stations from January 2013 to May 2015, the COMS daily LST was compared and validated. For the representative time for daily mean LST value from COMS LST-15, the time of 23 : 45 and 0:00 showed minimum deviations with AAOS daily LST. The time zone from 23 : 45 to 1:15 and from 7 : 30 to 9 : 45 showed high determination coefficient (R2) of 0.88 and 0.90 respectively. The daily COMS LST by averaging COMS LST-15 of the day showed R2 of 0.83. From the 5 cases of results, the COMS daily LST could be extracted from the average LST by using 15 minutes data from 7 : 30 to 9 : 45.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.720-725
• /
• 1991

In this thesis, the lead-lag compensator is designed to improve output characteristics of flyback zero voltage switching quasi-resonant converters. The switch and the diode are assumed ideally. And the SMPS is modelled by state equations with four operation modes. And the model for controller design is also achived by using a state space averaging method, which is continuous time average of state variables every period. The lag, the lead and the lead-lag compensator is designed the SMPS respectively. The time domain analysis and the frequency domain analysis are done for each compensated circuit. It is possible increasing the phase margin and improving the transient response by the compensators. The phase lag compensator has small overshoot comparatively. But the bandwidth is narrower than the others, so it has longest settling time. For the phase lead compensator, the response come to steady-state within short period. But the overshoot is the largest due to its large peak gain. Finally, the phase lead-lag compensator has medium characteristics in the overshoot and the settling time.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1431-1438
• /
• 2007

This paper presents a refined design model for current railroad design code on concrete structures exposed to marine environment. A time-varying diffusion coefficient(D) as well as surface chloride$(C_S)$ and chloride threshold level$(C_{lim})$ are studied. Averaging value of the D with time over exposed duration were used to refined durability design model to consider time dependent characteristic of D. The values for $C_S$ and $C_{lim}$ for the seashore in Korea revised for realistic durability design. The proposed model was verified by the so-called performance-based durability design, which is widely used in recent durability design code. Results show that the current standard specification underestimates durability performances of concrete structures exposed to marine environment, so that the cover depth design using current durability evaluation in the standard specifications is very much conservative. Thus, it is found that proposed durability design models for the railroad design code for railway concrete structures can be used effectively for service life design of concrete structures in marine environment.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.251-257
• /
• 2019

This paper proposes a new measurement method using virtual power concept to measure the effective value of 3-phase voltage with variable frequency. The conventional effective value measurement method uses a method of integrating data sampled during one or half cycle of the power voltage and averaging it. In this method, since the effective voltage is calculated every cycle, a time delay occurs in the measured effective voltage and it is s a problem to measure the effective value of a device whose frequency varies from time to time, such as a generator. The proposed 3-phase voltage rms measurement method has an advantage that it can measure accurate voltage RMS value regardless of measurement frequency variation. In particular, there is an advantage in that it is possible to measure a 3-phase effective voltage rather than an average value of the effective voltage of each phase in a 3-phase unbalance voltage. In addition, the validity of the proposed method is verified by using the Psim simulation tool and the experimental results are analyzed by applying the proposed measurement algorithm to the actual three phase synchronous generator voltage measurement experiment.

• 한국전자파학회논문지
• /
• 제10권1호
• /
• pp.44-53
• /
• 1999

다중경로 페이딩 환경에서 OFDM (Orthogonal Frequency Division Multiplexing)신호의 효율적인 전송을 위해 파일롯을 기반으로 한 시간 평균 채널 추정 방식을 제안하고, 그 성능을 분석하였다. OFDM 시스댐에 서는 각 부반송파의 채널 페이딩 왜곡을 보상하기 위해 주파수 영역 채널 추정이 사용된다. 이 방식은 주파수 축에서 분산 파일롯을 사용하여 간단한 보간에 의해 채널 왜곡을 추정하므로 이때의 채널 추정치는 잡음 으로 인한 왜곡 성분이 포함되어 있다 본 논문에서는 채널 추정치에 포함된 잡음으로 인한 왜곡 성분을 제거하기 위해 시간 영역 채널 추정 방식을 제안한다. 제안한 방식은 주파수 영역 채널 추정 후 채널의 주파수 응답을 시간 축으로 평균을 취함으로써 추정된 채널 응답에 포함된 잡음 성분을 효과적으로 제거할 수 있다. 제안한 채널 추정기의 성능을 평가하기 위해 캠퓨터 모의 실험을 수행하였다. 라이시안 채널에서 SER (Symbol Error Rate)이 $10^{-4}$일 때를 기준으로 하여 완벽한 채널 추정의 경우와 제안한 방법 및 기존 방법의 성능을 비교하였다. 제안한 채덜 추정기는 완벽한 채널 추정의 경우와 비교시에 16 QAM. 64 QAM에서 각각 0.07 dB. 0.6 dB 차이가 있었으며 가우시안 보간에 의한 채널 추정과 비교시는 각각 약 1. 7 dB. 1.9 dB의 성능 개선을 보였다.

• 대기
• /
• 제24권3호
• /
• pp.317-329
• /
• 2014

Eddy covariance data have been analyzed to investigate the influence of surface heterogeneity on turbulent transfer over farmland and industrial sites near Nakdong river, Korea, where both large and small scale heterogeneities co-exist. For this purpose, basic turbulent statistics, quadrant analysis and multi-resolution decomposition have been analyzed during the daytime. Basic turbulent statistics were compared with typical turbulent statistics in the surface layer. Such comparisons were in close agreement for momentum and heat at both sites but not for water vapor at industrial site. The correlation coefficient between water vapor and vertical velocity ($r_{wq}$) is relatively low and skewness of water vapor ($sk_q$) is very low at industrial site, possibly due to limited water source. For heat at both sites and water vapor at farmland, the quadrant analysis show similar behavior to that over homogeneous site but for water vapor at industrial site, the presence of river and limited water source at industrial site seems to influence on water vapor transfer by coherent eddy motion by increasing sweep contribution and decreasing ejection contribution. Multi-resolution decomposition analysis shows that large scale heterogeneity leads to low $r_{Tq}$ at large averaging time regardless of season at both sites and there are seasonal changes of $r_{Tq}$ in mid-averaging times at industrial site, possibly due to seasonal change of trees and grasses near the site.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.114-120
• /
• 2003

We employed a method eliminating a temporally partial principal component (PC) of multichannel-recorded neuromagnetic fields for excluding spatially correlated noises from event-evoked signals. The noises in magnetoencephalography (MEG) are considered to be mainly spontaneous neuromagnetic fields which are spatially correlated. In conventional MEG experiments, the amplitude of the spontaneous neuromagnetic field is much lager than that of the evoked signal and the synchronized characteristics of the correlated rhythmic noise makes it possible for us to extract the correlation noises from the evoked signal by means of the general PC analysis. However, the whole-time PC of the fields still contains a little projection component of the evoked signal and the elimination of the PC results in the distortion of the evoked signal. Especially, the distortion will not be negligible when the amplitude of the evoked signal is relatively large or when the evoked signals have a spatially-asymmetrical distribution which does not cancel out the corresponding elements of the covariance matrix. In the period of prestimulus, there are only the spontaneous fields and we can find the pure noise PC that is not including the evoked signal. Besides that, we propose a method, called the extended temporal decorrelation method (ETDM), to suppress the distortion of the noise PC from remanent evoked signal components. In this study, we applied the Partial Principal component elimination method (PPCE) and ETDM to simulated signals and the auditory evoked signals that had been obtained with our homemade 37-channel magnetometer-based SQUID system. We demonstrate here that PPCE and ETDM reduce the number of epochs required in averaging to about half of that required in conventional averaging.