• Journal of Forest and Environmental Science
• /
• v.35 no.3
• /
• pp.197-204
• /
• 2019

A tree-length harvesting system using the HAM300, which is mounted on a farm tractor prototype machine, have been recently introduced in South Korea for thinning old (>30 years) forests. However, no research has previously been conducted on the characteristics of residual stand damage associated with cable yarding systems on thinning treatment stands in South Korea. Therefore, there were assessed on the degree and quantity of residual stand damage caused by felling and yarding process to broaden the knowledge of residual stand damage on semi-mechanized skyline thinning operations. This study investigated scar size, direction, area, shape type and their distribution on the residual stand damage caused by felling and yarding operations. Damage to residual trees was generated for 7.4% and 6.9% of residual trees in felling and yarding operations, respectively. Damaged direction of scars was located in front-side (38.9%) and up-side (34.7%) for felling operations while the highest scar damage was found on down-side (44.6%) for yarding operations. Scar heights of felling damage were higher than those of yarding damage. In yarding operation, the most of the scars was located within l0m from the center of the skyline corridor. These results should be useful information for forest managers and landowners to reduce residual stand damages and retain valuable timber volume from thinning treatments.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.59-66
• /
• 2019

This study was conducted to evaluate the effect of the synthetic forest road network by calculating the optimal road density and layout of the forest road network in order to construct the systematic road network in the forested area. For this, five comparative routes were additionally planed and compared through evaluation indicators. As a result, the optimum road density of the study site was estimated to be 18.4 m/ha, and the synthetic forest road network was the best in the four indicators such as average skidding distance, standard deviation of skidding distance, development index, and circuity factor. In addition, the synthetic forest road network was comparable to the main road network by about 4 %p in the timber volume available and potential area size for logging, but the construction cost of the road was about 20 %p lower. It showed a synthetic forest road network was better in terms of economy.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.337-351
• /
• 2015

The articles, published in the Journal of Korean Forest Society from Volume 1 (1962) to Volume 102 (2013), were investigated for the research trend analysis about forest plants for special purposes, i.e., edible plants, medicinal plants, feed resources, landscape plants, fiber plants, industrial usage, bee plants, bioenergy/phytoremediation uses, dye materials, and rare/endangered/endemic plants. These research articles were classified again based on the contents of research into following categories - habitat environment, ecology, physiology, propagation, silviculture (including planting and tending), genetics and breeding, identification, pest and disease control, animal-related research, components analysis and extracts, vegetation survey, biotechnology, management, recreation and forest healing, and research review. Among the total 2,433 articles published, 611 (25.1%) were related to plants for special usage or purposes. The highest frequency (14.9%) in publications was found in the field of silviculture followed by physiology, propagation, identification, and genetics and breeding, respectively. On the bases of usage, edible plants showed higher frequency (26.5%) than others, followed by industrial purpose, bioenergy/phytoremediation usage, landscape plants, medicinal plants, and rare/endangered/endemic plants. Populus plant species was the most popular in research, showing 62 articles; and Castanea crenata 36; Pinus koraiensis 35; Robinia pseudoacacia 20; Ginko biloba 17, etc. Based on the survey and analysis, the following points are suggested: 1) improved evaluation of forest plants as non-wood resources, 2) expanding research topics on the basis of production, management, and utilization of non-wood forest resources, 3) management of database of forest plant information and encouragement needed to strengthen cooperative researches satisfying the needs of other industrial and scientific areas, and 4) encouraging to promote traditional knowledge based research on forest plants.

• Journal of Korean Society of Forest Science
• /
• v.101 no.4
• /
• pp.592-598
• /
• 2012

Forest stand yield and its changes along with 10 thinning scenarios were estimated using a forest stand yield model for six major tree species in Korea, such as Pinus densiflora in Gangwon province, Pinus densiflora in other regions, Pinus koraiensis, Larix leptolepis, Quercus acutissima Carruth, Quercus mongolica. The 10 thinning scenarios were generated based on a number of constraints and assumptions. For instance, it was assumed that thinning is implemented between 15 years and 40 years with 5 year period and its duration should be at least 10 years. Also, the overall removal rate from the thinning treatments was assumed to be not greater than 60%. Under the 10 scenarios, the overall stand yield volumes from thinning and final harvesting were estimated for each species and site index. The results showed that highest yield volumes were obtained for Pinus densiflora in Gangwon province, Pinus koraiensis and Quercus mongolica when 30% of basal areas were thinned at 20 and 40 years, while highest yield volumes were obtained for Pinus densiflora in other regions and Larix leptolepis when 20% of basal areas were thinned at 20, 30 and 40 years. Those two scenarios gave the same amount of highest yield volume for Quercus acutissima Carruth. Also the results indicated that thinning treatment is effective to increase overall stand yield volume and its effects are larger with a higher site index. The largest thinning effects were found in Pinus densiflora in Gangwon province (28%) and Larix leptolepis (25%), while limited in Pinus koraiensis (12%). The forest stand yield model, used in this research, could be an effective tool for estimating the stand dynamics with various thinning treatments, but it could be improved in a further research that validates its applicability in the field.

• Journal of Korean Society of Forest Science
• /
• v.84 no.4
• /
• pp.437-446
• /
• 1995

This study was carried out to estimate the Korean Pine stand structure such as coefficient of variation of mean DBH, number of trees and volume per ha by Weibull distribution for each age class from I to V, based on photo measurement and timber cursing in Kangwon National University Experimental Forests. The results were summarized as follows: 1) Coefficient of variation of mean DBH for each age class from I to V, which was obtained by converting DBH estimated from crown diameter by photo measurement into quadratic mean DBH, was estimated as 28.88%, 24.13%, 23.29%, 20.27%, and 18.79%, respectively. 2) Number of trees per ha of each age class by Weibull distribution was obtained as 2875, 2100, 1875, 800, and 325, respectively. 3) Volume per ha of each age class was estimated as $22.9m^3$, $66.8m^3$, $101.3m^3$, $209.6m^3$, and $266.8m^3$, respectively. 4) Therefore, aerial photographs will be helpful to estimate the stand structure effectively.

• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.209-216
• /
• 2023

This study aimed to use national forest inventory data to develop a forest productivity index and yield prediction model of a Tilia amurensis stand. The site index displaying the forest productivity of the Tilia amurensis stand was developed as a Schumacher model, and the site index classification curve was generated from the model results; its distribution growth in Korea ranged from 8-16. The growth model using age as an independent variable for breast height and height diameter estimation was derived from the Chapman-Richards and Weibull model. The Fitness Indices of the estimation models were 0.32 and 0.11, respectively, which were generally low values, but the estimation-equation residuals were evenly distributed around 0, so we judged that there would be no issue in applying the equation. The stand basal area and site index of the Tilia amurensis stand had the greatest effect on the stand-volume change. These two factors were used to derive the Tilia amurensis stand yield model, and the model's determination coefficient was approximately 94%. After verifying the residual normality of the equation and autocorrelation of the growth factors in the yield model, no particular problems were observed. Finally, the growth and yield models of the Tilia amurensis stand were used to produce the makeshift stand yield table. According to this table, when the Tilia amurensis stand is 70 years old, the estimated stand-volume per hectare would be approximately 208 m³ . It is expected that these study results will be helpful for decision-making of Tilia amurensis stands management, which have high value as a forest resource for honey and timber.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.125-135
• /
• 2022

In this study, growth changes of the diameter at breast height (DBH), height, basal area, volume, and biomass of Korean white pine (Pinus koraiensis Siebold & Zucc.) on a plantation were examined via long-term monitoring. In addition, this study was performed to provide the basic data for timber production in line with DBH class by comparing the growth of the relative DBH size. Growth characteristics according to DBH class were analyzed by categorizing trees into five classes based on sorted DBH rankings: class I (1%-20%; upper 20%), class II (21%-40%), class III (41%-60%), class IV (61%-80%), class V (81%-100%; lower 20%). A total class (0%-100%) was also used. Total increment and mean annual increment (MAI) were calculated using data from nine measurements taken over 39 years. Tree characteristics based on average values and stand characteristics based on unit area per hectare were examined. According to the total increments of variables, the differences in DBH, basal area, volume, and biomass among classes I-V increased over time, whereas the height difference did not continually increase. According to MAI, the maximum DBH value was 0.92 cm·yr^-1 at age 23 in class I, whereas the maximum value in all trees was 0.69 cm·yr^-1 at age 17. The maximum value of height MAI for class I was 0.52 m·yr^-1 at age 23, whereas that for all trees was 0.49 m·yr^-1 at age 20. In terms of basal area, volume, and biomass growth at tree-and stand-level, the maximum MAI of class I and all trees was not observed during the measurement period. Therefore, additional long-term monitoring data are required to determine the maximum MAI of the variables.

• Journal of Korea Water Resources Association
• /
• v.46 no.4
• /
• pp.401-412
• /
• 2013

Water footprint of a product and service is the volume of freshwater used to produce the product, measured in the life cycle or over the full supply chain. Since water footprint assessment helps us to understand how human activities and products relate to water scarcity and pollution, it can contribute to seek a sustainable way of water use in the consumption perspective. For the introduction of WFP scheme, it is indispensable to construct water inventory/accounting for the assessment, but there is no database in Korea to cover all industry sectors. Therefore, the aim of the study is to develop water footprint inventory within a nation at 403 industrial sectors using Input-Output Analysis. Water uses in the agricultural sector account for 79% of total water, and industrial sector have higher indirect water at most sectors, which is accounting for 82%. Most of the crop water is consumptive and direct water except rice. The greatest water use in the agricultural sectors is in rice paddy followed by aquaculture and fruit production, but the greatest water use intensity was not in the rice. The greatest water use intensity was 103,263 $m^3$/million KRW for other inedible crop production, which was attributed to the low economic value of the product with great water consumption in the cultivation. The next was timber tract followed by iron ores, raw timber, aquaculture, water supply and miscellaneous cereals like corn and other edible crops in terms of total water use intensity. In holistic view, water management considering indirect water in the industrial sector, i.e. supply chain management in the whole life cycle, is important to increase water use efficiency, since more than 56% of total water was indirect water by humanity. It is expected that the water use intensity data can be used for a water inventory to estimate water footprint of a product for the introduction of water footprint scheme in Korea.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.26-35
• /
• 2013

This study was conducted to select superior provenances of Scots pine (Pinus sylvestris L.) well adapted to Korean environment for timber production. In 1976, twenty-two provenances of Scots pine were introduced from Sweden and the seeds were sown in seed beds in March. After one year, the seedlings were transplanted to nursery beds. The resulting 1-1 seedlings of 22 provenances were planted at Whaseong in 1978. Randomized complete block design with 3 replications were used for test plantation. Each provenance was planted with 20-tree row plot in each block and at a spacing of $1.8{\times}1.8m$. The growth performance of each provenance was monitored up to 33-years after planting. There were significant differences among provenances in volume growth. F3001 provenance showed the best volume growth of 33-years after planting ($0.160m^3$), which was 2.2 times greater than that of the lowest provenance W2027 ($0.072m^3$). The ranking of provenances was stabilized after 14 years. Comparing to reference tree species, Japanese red pine (Pinus densiflora), all Scots pine provenances showed poor growth performance. In other words, volume growth of Japanese red pine at age 28 and 33 were 2.1 and 3.3 times greater than that of Scots pine, respectively. Moreover, survival rate of Scots pine was lower than that of Japanese red pine. Based on these results, it was suggested that Scots pine was not suitable to Korean environments. The cause of maladaptation of Scots pine and the implications of introduction breeding were discussed.

• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.51-61
• /
• 2002

This study was conducted to investigate and compare species composition, stand structure, and growth pattern for two different sites in which silvopastoral system has been taking place. One site was the pasture area where a number of trees were removed and grasses were planted for cattle grazing, and the other site was the deciduous forest that has been established by ecological succession. The results were as follows: 1. Nine tree species were present equally in the pasture area and the deciduous forest. Of these species, seven tree species were growing in common for two sites. However, the species composition, including density and frequency, was varied by sites. 2. The number of stems per hectare in the pasture area was 71, and that in the deciduous forest was 1,433, having shown the big difference. It is estimated that, considering the growth rate, better grown trees were remained at the time of harvesting in 1996. 3. The growth of diameter, height, and basal area in the pasture area was superior to that in the nearby deciduous forest. In spite of higher values of diameter and height, the timber volume of pasture area per unit area was less than 15% of that in the deciduous forest. 4. Providing sufficient growing space, the pasture area supported higher values of diameter and height. The wider growing space also had influence on the expansion of crown of trees by the result of deliquescent growth pattern. From this point of view, more research would be needed to establish appropriate number of trees for silvopastoral system.