• Journal of Life Science
• /
• v.13 no.5
• /
• pp.618-625
• /
• 2003

Investigations were carried out to optimize the culture conditions for the production of xylanase by Paenibacillus sp. DG-22, a moderately thermophilic bacterium isolated from timber yard soil. Xylanase production showed a cell growth associated profile. Xylanase activity was found only in the culture supernatant, while $\beta-xylosidase$ activity was mainly associated with the cells. The formation of xylanase activity was induced by xylan and repressed by glucose and xylose. The production profile of xylanase was examined with various commercial xylan and maximum yield was achieved with 0.1∼ 0.5% birchwood xylan. Among various nitrogen sources tested, yeast extract was optimal for the production of xylanase. The xylanase activity was inhibited by $Co^{2+},\; Cu^{2+},\; Fe^{3+},\; Hg^{2+}\;$ and$\;Mn^{2+}$ ions while $Ca^{2+},\; Mg^{2+},\; Ni^{2+},\; Zn^{2+}$ions and DTT stimulated xylanase activity Mercury (II) ion at 5 mM concentration abolished all the xylanase activity. The predominant products of xylan-hydrolysate were xylobiose, xylotriose, and higher xylooligo-saccharides, indicating that the enzyme was an endoxylanase.

• Journal of the Korea Furniture Society
• /
• v.25 no.1
• /
• pp.45-54
• /
• 2014

Wood cutting utilizing CNC art in the field of furniture design industry, art, education are diverse. However, there is lack of data in the case for wood cutting, such as cutting conditions and wood cutting. So this article is to establish furniture design processing using CNC. The researchers investigated the processed products using CNC, the data of the web site and CNC relevant articles, then organized its impact on the furniture industry today. History and definition of CNC have studied for a discussion of the advantages and disadvantages. Then, the researchers analyzed the cases to investigate the wood cutting conditions, was applied to the fabrication of furniture domestic and foreign. CNC organized systematically design information through the computer So, it allowed to reduce the repetitive behavior that has to work hand in the furniture manufacture existing. CNC has made it possible to design a fine complex in furniture design industry. So it became possible to make a new representation and production of various forms. Material about CNC are mostly for milling machine and shelves for metal processing. So, the researchers investigated and precautions general content of wood cutting. The enhanced understanding to investigate an example that is applied outside the country, is used to analyze the expression various techniques CNC. It is difficult to obtain accurate data processing, it has various characteristics in the same timber, Future research is about analyzing type applications and CNC machining range at the time of processing the various wood.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.1
• /
• pp.103-113
• /
• 2015

Korean pines(Pinus koraiensis) are one of the major plantation species in the Republic of Korea and their natural habitats range from Japan and China to Siberia. The seed of Korean pines, pine nuts, are well know for good food reserves. Due to the global changes which drive the Korean peninsula into the semi-tropical climate, current plantations and natural habitats of Korean pines are faced with the change in the environmental conditions to some extent. To anticipate suitable sites for Korean pines in the future, the location of Korean pines were extracted from the 'Map of suitable trees on a site' that provides the map of suitable trees on a site considering tree species for timber and special uses, and then MaxEnt modelling was used for generating a prediction map on the basis of statistical analysis. As a result, the order of predicted suitable sites were Kangwon-do, Kyungsangbuk-do and Chungcheongbuk-do provinces and sites with high elevation within those provinces were considered most suitable in common. The prediction map of suitable sites for Korean pines presented that suitable sites in the future decreased by 72.2% by 2050's and almost disappeared with a decrease of 92.1% by 2070's on a nationwide scale. In relation to the major production regions of pine nuts in South Korea - Gapyung gun and Yangpyung gun, Kyunggi province and Hongcheon gun, Kangwon province, suitable sites within their areas were predicted to increase by 2050's but become extinct in South Korea by 2070's. To establish a long-term countermeasures against the improvement on forest productivity quality in terms of managing national food security, the result from this study can be considered as a firm basis of predicting plantation suitability. Also, it can be used to predict the changes in supply of forest products and thereby market values in accordance with climate change scenarios.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.59-65
• /
• 2011

The saw dust of tropical hardwood, Nyatoh(Palaquium Spp.), was used as a raw material for the preparation of the high valued microcrystalline cellulose(MCC). Three pulping methods, soda pulping, Kraft pulping, and acid-sulfite pulping were applied to obtain cellulose from the saw dust. The residual impurities were removed with the additional bleaching processes: (A) $ClO_2{\rightarrow}H_2O_2$; (B) $ClO_2{\rightarrow}O_3$; (C) $O_3$. For the acid treatment for MCC preparation, the $H_2SO_4$, with three concentration, 20%, 40%, 60% were applied and the effects of $H_2SO_4$ concentration on the properties of MCC were evaluated. The results indicated that the MCC obtained by acid-sulfite pulping followed with $O_3$ treatment and 40% $H_2SO_4$ treatment showed less residual lignin, higher brightness and crystallinity than that of Avicel MCC.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.42-49
• /
• 1997

The purpose of this study was to investigate the relationships among density, moisture content, and modulus of elasticity in which are important characteristics in physical and mechanical properties of woods. In this study, the dynamic MOE was calculated through the combination with resonance frequency of transverse vibration method and density, and the estimated moisture contents were calculated with two different equations (1, 2) in order to compare with experimental moisture contents. The following results from this study were obtained: 1. According to the regression analysis with two different parameters (E and density), the two regression lines appeared to be straight intersecting at 0.6 density. As another factor, moisture contents in wood also influenced on the analysing regression at the below F.S.P. 2. When considering the relationship between moisture contents and E, the tendency of each moisture content and E showed very similar pattern suggesting that moisture contents in addition to density are very important parameter. 3. When together with moisture contents and density as parameters for multiple regression analysis, coefficiences of determinations are dramatically improved. Interestingly, the coefficiences of determinations are further increased when analysing at the below point of F.S.P. and when analysing higher and lower density separately. In summary, more correct estimation of the dynamic MOE of woods can be possible with only transverse vibration and density in wood. Therefore, with this indirect method, the calculation of MOE in all kinds of woods including timber, live tree and wood products can be feasible resulting in accelerating the efficiency of time and labor.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.4
• /
• pp.258-264
• /
• 2005

The objectives of this study were to study 1) emergence of pine bark beetles, 2) larval density in residual timber on Idlest land by each felling season, and 3) the secondary damage rates in the tended forest. Pine forest land which had undergone tending had a higher secondary damage ratio $(59.6\%)$ by pine bark beetles than forest land that was not tended $(2.8\%)$. The number of escape holes averaged 11.3 0.31 per $250 cm^2$ on the bark of leaf trees in the tended forest. The number of escape holes was higher in the Jinju site than in the Hamyang site. The larval habitat density of pine bark beetles as compared with each felling period was higher after mid-October than in forests tended early in October. Thus, forests should be tended before early October in order to prevent secondary damage from pine bark beetles. Secondary damage in the tended forest was higher in the upper part $(75.5\%)$ of the tree crown than in the lower part $(49.2\%)$. The damage was higher in terminal shoots $(80\%)$ than in lateral shoots $(48\%)$. Therefore, secondary damage by pine bark beetles can cause deterioration of the elongation growth of the forest trees. In conclusion, if by-products of tended pine forest forests are neglected, they will be utilized as a propagation site for pine bark beetles (Blastophagus piniperda L). The propagated adults will damage the tender shoots of the leaf trees and thus seriously limittheir elongation.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.36-42
• /
• 2015

This study examined true modulus of elasticity (MOE) and modulus of rigidity (G) for domestic woods with different slenderness ratios (L/D) using the static bending and stress wave tests. Bending properties of small clear wood specimen of three domestic wood species were determined at 12% moisture content. The results of this study indicated that both MOR and MOE of domestic woods were affected by the slenderness ratio. As the slenderness ratio increased, MOR and MOE increased. G and true MOE of domestic timber beams were obtained at different slenderness ratios by flexure test and stress wave test. The values reported here can be useful if these species woods are used for structural purposes. However, the reported values are only indicative and do not represent the true average of wood species due to the limited number of specimens tested.

• Journal of Forest and Environmental Science
• /
• v.29 no.2
• /
• pp.147-156
• /
• 2013

Multiple use forestry is capable of generating income for forest based communities through Non-Timber forest products (NTFPs) which provide food, medicine, materials for domestic use and cash income for communities adjoining forest areas in developing countries. This study evaluates the economics of producing ginger rhizomes under teak canopy in a multiple land use system during 2007 and 2008 in even aged teak plantations in Ibadan and Ife, Nigeria. Twelve $6m^2$ sample plots were randomly selected in Completely Randomized Block Design within and outside the plantation. Average ginger rhizome of (50-60 g) were planted on the slightly tilled soil. NPK 15:15:15 was applied at 180 kg/ha on a split unit dose. ANOVA, Profitability, Benefit-Cost (B/C) ratio were used to analyze data. Results showed no significant differences between sites in ginger rhizome yield, (0.089 and 0.718, ${\rho}{\leq}0.05$) in 2007 and 2008 respectively. Average yield were higher outside teak canopy in both sites and treatments, (Ibadan -40.05 g>32.9 g, Ife -67.6 g>25.2 g and Ibadan -41.3 g>31.5 g, Ife -66.8 g>25.0 g) with and without NPK respectively. NPK had no effect on yields within teak plantation, (Ibadan -31.5<32.9 g, Ife -25 g<25.2 g). Ginger rhizome production was viable financially without inorganic fertilizer during second cropping season within and outside plantation (B/C=1.02, 1.09) respectively. Ginger could be raised profitably under teak canopy, however, studies on insolation requirement of ginger under teak canopy and other tree plantations are recommended.

• Journal of Korean Society of Forest Science
• /
• v.103 no.1
• /
• pp.122-128
• /
• 2014

This study aims to determine the difference in profitability of Allium victorialis farming system between on-field and under-forest, and to propose several better ways for development of under-forest farming system of Allium victorialis. Survey was conducted 12 farmer in Gangwon, Chungnam, Jeonnam, Gyeongbuk to investigate production cost, management cost, input labors and so on. In this study, IRR, B/C ratio and NPV were used for profitability analysis. The result applied 25,000 won for under-forest farming system and 15,000 won for on-field farming system as unit price of sale showed IRR 36.2% and 54.2% respectively. The profitability of Allium victorialis from under-forest farm was not lower than other non timber forest products. And it will be possible to create high profitability such like that of Allium victorialis from on-field farm, providing the technical development for intensive farming is supported.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.487-496
• /
• 2017

The marketization in North Korea is spreading rapidly. This study proposes forest rehabilitation strategy for North Korea in light of their major shift toward market economy. This current trend of marketization in North Korea is now affecting the forest sector, especially the way the residents utilize small forest land. For analyzing the influence of marketization on forest management in North Korea, we reviewed the official documents issued by North Korea and related materials of North Korean marketization. The government of Kim Jong Eun has set up policies and systems regarding the spread of marketization, such as guaranteeing individuals a right to dispose certain products on their own and establishing a special economic zone to attract foreign investments. In the forestry sector, the North Korean government has been trying to fully implement its forest restoration plan by carrying out measures like re-claiming of sloping lands that had been previously used by residents. However, as marketization progresses, it is expected that there lies much difficulty in government-led massive mobilization for forest restoration due to the increase of illegal logging to meet high demand for timber, illegal firewood harvesting, collecting non-timber products for livelihoods and illegal crop cultivation to sell in the market. Therefore, South Korea's support for forest restoration should also consider the recent marketization phenomenon in North Korea. It is necessary to formulate strategic measures such as conducting joint commercialization project on agroforestry management using cooperative farming unit, helping to improve income source from small forest lands, and to activate a comprehensive mountain village special economic zone by utilizing forest business. We do hope that our proposed forest rehabilitation strategy in this paper regarding the changes in North Korea's marketization and forest policy can give a meaningful suggestion on supporting forest restoration in North Korea in an effective way.