• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2325-2334
• /
• 2023

To study the lubrication performance of tilting-pad thrust bearing (TPTBs) during start-up in nuclear pump, a hydrodynamic lubrication model of TPTBs was established based on the computational fluid dynamics (CFD) method and the fluid-structure interaction (FSI) technique. Further, a mesh motion algorithm for the transient calculation of thrust bearings was developed based on the user defined function (UDF). The result demonstrated that minimum film thickness increases first and then decreases with the rotational speed under start-up condition. The influence of pad tilt on minimum film thickness is greater than that of collar movement at low speed, and the establishment of dynamic pressure mainly depends on pad tilt and minimum film thickness increases. As the increase of rotational speed, the influence of pad tilt was abated, where the influence of the moving of the collar dominated gradually, and minimum film thickness decreases. For TPTBs, the circumferential angle of the pad is always greater than the radial angle. When the rotational speed is constant, the change rate of radial angle is greater than that of circumferential angle with the increase of loading forces. This study can provide reference for improving bearing wear resistance.

• 정보처리학회논문지B
• /
• 제11B권1호
• /
• pp.27-34
• /
• 2004

본 논문에서는 MPEG-2비디오 스트림에서 복호화 과정 없이 압축비디오에서 직접 얻을 수 있는 정보들을 활용하여 움직이는 객체를 추적하고 해석하는 방법을 제안한다. 제안된 방법에서는 먼저 MPEG-2의 움직임 벡터로부터 근사적으로 움직임 플로우(motion new)를 구성하고, 전역 적인 움직임 플로우로부터 일반화된 Hough 변환을 이용 카메라의 기본적인 움직임인 팬(pan), 틸트(tilt), 줌(zoom)량 등을 계산하였다. 계산된 카메라 움직임은 국부적으로 일어나는 객체의 움직임을 보정하는데 사용하였다. 움직이는 객체의 추적은 사용자가 원하는 객체를 바운딩 박스 형태로 정의함으로 시동된다. 이후의 객체의 추적은 카메라 움직임이 보정된 객체의 움직임 플로우를 한 GOP(Group of Pictures)단위로 면적 기여도에 따라 누적하여 추적하였다. 또한 추적오차의 누적을 막기 위해 매 GOP마다 DCT(Discrete Cosine Transform) 정보를 이용하여 초기 바운딩 박스와 매칭을 통해 객체의 영역을 재 설정하였다. 제안된 방법은 압축된 비디오 스트림에서 직접 정보를 얻음으로써 계산속도의 향상을 기할 수 있으나, 압축된 MPEG-2 비디오에서 얻을 수 있는 정보들이 최대 블록 단위이므로 객체의 정의도 블록단위 이상의 객체로 제한되며, 이용한 수 있는 정보가 제한되어 있기 때문에 정확한 객체추적보다는 근사적인 객체추적에 적합하다.

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.73-79
• /
• 2005

The characteristics of a tilt sensor utilizing the resistance change of an electrolyte associated with inclination is investigated, and a dynamic compensation modeling is proposed to make the real-time measurement of the absolute slope possible even with sporadically dynamic motion. Although the proposed system is small, economical and accurate for quasi-steady slope measurement, since it contains a freesurface the evolution of the liquid surface that has no direct relation to the real slope must be excluded for any rapid rotations or translations. For various artificial motions the response of the sensor is analyzed and simplified modeling equations are proposed.

• 한국운동역학회지
• /
• 제20권2호
• /
• pp.197-204
• /
• 2010

Scapular position and motion are essential for normal upper limb mobility; Further, the posture of patients with thoracic kyphosis is related to shoulder girdle function and disorder. The purpose of this study was to examine the effects of thoracic posture on the shoulder range of motion and on three-dimensional scapular kinematics. Thirty healthy subjects performed right-arm abduction along the frontal plane while standing in both erect and in slouched trunk posture. The scapular position and rotation, and shoulder and thoracic angles were recorded using a motion analysis system. The scapular upward rotation and internal rotation were significantly altered according to postural tatiges; however, scapular tilt was not affected. Shoulder angle was significantly decreased in the slouched posture as c rpared to tatt in the erect posture. Thus, a slouched posture(thoracic kyphosis) significantly affects the shoulder range of motion and scapular kinematics during shoulder abduction in the frontal plane.

• 한국운동역학회지
• /
• 제21권2호
• /
• pp.223-230
• /
• 2011

The purpose of this study was to analysis the effect of form and hardness of outsoles on the motion of the lower extremity joints and on foot pressure during gait. The subjects were 15 women(mean age, $48.5{\pm}2.4$ years), who had no serious musculoskeletal, coordination, balance or joint/ligament problems within 1 year prior to the study. The pelvic tilt, joint angles at the lower extremities and the vertical ground reaction force(GRF) were compared during gait with 3 types of shoes (A, B, C) by using one-way repeated ANOVA(p<.05). During gait, the peak tilt angle and the range of motion(ROM) of the ankle and knee joints were found to be significantly different among the 3 types of shoes. The type C shoes showed a significantly lower mean second maximum vertical GRF than types A and B. The curved outsoles of type C shoes, which had a form and hardness different from those of A and B, was designed strategically for walking shoes to provide stability to the Additionally, type C induced the dispersion of eccentric pressure and made the center of pressure roll over to the center line of the foot.

• 전자공학회논문지 IE
• /
• 제43권2호
• /
• pp.54-62
• /
• 2006

본 논문에서는 적응적 시차 움직임 벡터에 기반한 스테레오 물체추적 및 3차원 디스플레이 시스템을 제안하였다. 즉, 제안된 시스템에서는 스테레오 입력영상 시퀀스로부터 적응적으로 추출된 시차 벡터로부터 프레임간 적응적 시차 움직임 벡터를 구한 다음 이를 이용하여 각 프레임에서 표적물체가 존재하는 영역 및 위치좌표를 효과적으로 검출하였다. 또한, 이를 프레임간 표적의 이동거리 좌표를 구하여 최종적으로 팬/틸트를 제어해 줌으로써 표적 물체를 추적하였다. $256\times256$ 픽셀 크기의 스테레오 영상 20 프레임을 사용한 물체추적 실험 결과, 표적 물체의 실제위치와 실험을 통해 얻은 이동위치 간의 평균 에러율이 약 3.05%로 낮게 나타남으로써 본 논문에서 새로이 제안한 적응적 시차 움직임 벡터 기반의 스테레오 물체추적 시스템의 실질적인 응용 가능성과 영상복원 기법을 사유하여 이동 물체의 3차원적 입체 디스플레이 또한 가능하다.

• 한국운동역학회지
• /
• 제31권4호
• /
• pp.283-289
• /
• 2021

Objective: The aim of this study was to analyze the pattern of Kolman technique by five Korean top gymnasts including the three national athletes on horizontal bar. Method: Two digital high-speed camcorders were used with 90 frames/sec and their Kolman motions were filmed in sports science secondary school gymnasium at U city. After the kinematic and kinetic variables were carried out by Kwon3D 3.1 motion package during the whole phase, the optimized release motion was investigated by simulating the body COG path during the aerial phase. Results: Firstly, it was revealed that the average changes of hip, shoulder joint angle were 84 deg, 53 deg respectively during the functional sub-phase and the average swing phaseal time was 1.21 s. Secondly, it was revealed that the average body COG positions and velocities (Y, Z) at release were -0.65 m, 0.48 m, 1.65 m/s, 3.97 m/s respectively and the average release angle, peak height and flight time were 67 deg, 1.29 m, 0.79 s respectively. Thirdly, it was revealed that the directions of somersault of whole and lower body, tilt of lower body were counterclockwise, whereas the directions of tilt of whole body, twist of whole and lower body were clockwise at the ready for re-grasp. Lastly, it was revealed that the body COG paths were different from each other during the aerial phase followed by the different body COG velocities. Conclusion: Korean gymnasts of this study controlled their motions well in terms of the timing of hip·shoulder joint, body position, body angular momentum especially during the functional sub-phase, but their motions were different during the aerial phase. Nonetheless most of them made the adequate body position at the instant of re-grasp. It would be suggested that Korean gymnasts except S3 should increase the vertical velocity.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.361-367
• /
• 2010

This paper reports the development of a mobile robot for patrol using a single laser range finder. A Laser range finder is useful for outdoor environment regardless of illumination change or various weather conditions. In this paper we combined the motion control of the mobile robot and the algorithm for detecting the outdoor environment. For obstacle avoidance, we adopted the Vector Field Histogram algorithm. A laser range finder is mounted on the mobile robot and looking down the road with a small tilt angle. We propose an algorithm for detecting the surface of the road. The outdoor patrol robot platform is equipped with a DGPS system, a gyro-compass sensor, and a laser range finder. The proposed obstacle avoidance and road detection algorithms were experimentally tested in success.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1155-1160
• /
• 2005

In order to evaluate the safety of navigation at sea and the safety of mooring ship on berthing, it is necessary that the wave and wind induced ship dynamic motion should be measured in real time domain for the validity of theoretical evaluation method such as sea-keeping performance and safety of mooring. In this paper, the basic design of sensors is discussed and some system configurations were shown. The developed system mainly consists of 4 kinds of sensors such as three dimensional accelerator, two dimensional tilt sensor, two displacement sensors and azimuth sensor. Using the this measuring system, it can be obtained the 6 degrees of freedom of ship dynamic motions at sea and on berthing such as rolling, pitching, yawing, sway, heave, surge under the external forces.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.19-28
• /
• 1999

In this study, a real-time simulation system and a washout algorithm for an excavator have been developed for a driving simulator with six degrees of freedom. The excavator model consisting of a boom. bucket, upper frame, lower frame and four wheels, has total 11 degrees of freedom. The suggested washout algorithm consists of high and low pass filters with second order. The high pass filters cut off low frequency of the motion cues limited by platform motion. The cut off frequency for the tilt coordination are suggested for a realistic regeneration of excavator motion.