• 제목/요약/키워드: tilt module

검색결과 50건 처리시간 0.024초

Design of Torsion-typed Smooth Picture Actuator for DLP Projection TV

  • Moon, Yang-Ho
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.564-568
    • /
    • 2006
  • Smooth picture module is operated by vibration to tilt the light from the DMD (digital micro mirror device) of DLP projection TV, which makes the screen of the TV smoother and DMD chip cost lower. To satisfy the vibration characteristics of smooth picture module, it is designed by optimizing moment of inertia, spring constant and damping coefficient, using structural and fluid dynamic simulation that showed a good agreement with experimental data. To reduce the material cost and moment of inertia, engineering plastic is used and the reliability is estimated. A VCM (voice coil motor) type actuator for smooth picture has to satisfy performance requirements such as higher driving force, lower power consumption, and lower cost. The initial design and optimization for VCM was performed using FE analysis. It allowed us to optimize the design of magnetic circuit of the proposed actuator to obtain higher force while maintaining a lower cost.

  • PDF

이미지 센서 모듈의 광학적 특성 테스트를 위한 표준화된 기술 방법 (Standardized Description Method of Optical Characteristics Tests for Image Sensor Modules)

  • 이성수
    • 전기전자학회논문지
    • /
    • 제18권4호
    • /
    • pp.603-611
    • /
    • 2014
  • 이미지 센서와 렌즈를 모듈 상에 고정할 때, 기계적인 오차로 인해 취득된 영상의 기울임 또는 회전이 발생하기도 하고 화각이 좁아지기도 한다. 따라서 테스트 장비에서 이미지 센서 모듈의 광학적 특성을 테스트하여야 한다. 본 논문에서는 이미지 센서 모듈의 광학적 특성을 테스트하는 방법을 설명하고, 이를 영상 취득 특성과 유사한 방식으로 표준화한 기술 방법을 제안한다. 제안된 방법은 테스트 장비가 영상 취득 특성과 광학적 특성을 함께 테스트하는데 도움이 된다.

자세 균형 측정을 위한 디지털 경사계 설계 (Design of Digital Inclinometer for Measuring Postural Balance)

  • 명현석;이효기;권오윤;이경중
    • 전자공학회논문지SC
    • /
    • 제45권1호
    • /
    • pp.50-56
    • /
    • 2008
  • 본 논문에서는 롤(Roll)에 누워 있는 피검자의 각도와 가속도 신호를 측정하기 위한 디지털 경사계 설계하였다. 개발된 시스템은 기울기 센서(tilt sensor), 2축 가속도 센서(biaxial accelerometer), 마이크로프로세서(single chip microprocessor)와 블루투스(BlueTooth module)로 구성된다. 개발된 디지털 시스템은 다루기 쉽고 쉽게 착용 할 수 있다. 시스템을 성능을 평가하기 위해서 Roll위의 3명의 피검자로부터 각도와 가속도 신호는 ZEBRIS와 디지털 경사계에 의해서 동기화하여 측정하였다. 측정된 신호는 정량적인 방법에 의해서 처리되며 그때의 상관계수가 0.93임을 보여 준다. 이와 같은 결과로부터 디지털 경사계는 몸의 움직임을 평가하는데 유용할 것으로 보여 진다.

프레넬 렌즈를 이용한 항공장애등 광학계 최적 설계 (Optimization of the Optical System for an Aircraft Warning Light Using a Fresnel Lens)

  • 김종태;박현준
    • 한국광학회지
    • /
    • 제32권1호
    • /
    • pp.15-21
    • /
    • 2021
  • 본 논문에서는 LED 광원 모듈과 시준용 프레넬 렌즈를 이용하여 항공기 장애등 광학 시스템을 설계하였다. 설계된 광학계는 국토 교통부 항공기 경고등의 수직 양각 중심 광도 20,000 cd와 발산각 광도 규격 조건을 만족시키기 위해 프레넬 렌즈를 모듈별로 설계하였다. 또한 LED 광원 모듈과 프레넬 렌즈의 위치와 기울기를 조정하여 광학 시스템을 최적화하였으며, 이렇게 설계된 광학계의 배광 특성을 분석하고 비교하여 최적의 성능을 가진 항공기 경고등 광학계를 설계하였다.

퍼지 제어기를 이용한 실시간 이동 물체 추적에 관한 연구 (Study on the Real-Time Moving Object Tracking using Fuzzy Controller)

  • 김관형;강성인;이재현
    • 한국정보통신학회논문지
    • /
    • 제10권1호
    • /
    • pp.191-196
    • /
    • 2006
  • 본 논문에서는 비젼 시스템을 이용하여 이동 물체를 추적하는 방법을 제안하였다. 이동 물체를 계속적으로 추적하기 위해서는 이동 물체의 영상이 화상의 중심점 부근에 위치하도록 해야 한다. 따라서 이동 물체의 영상이 화상의 중심점의 부근에 위치하도록 하기 위하여 팬/틸트(Pan/Tilt)구조의 카메라 모듈을 제어하는 퍼지 제어기를 구현하였다. 향후, 시스템을 이동로봇에 적용하기 위하여 비젼 시스템을 위한 영상처리보드를 설계 제작하였고, 대상물체의 색상과 형태를 파악한 후 퍼지 제어기를 이용하여 카메라모듈이 물체를 추적할 수 있도록 StrongArm 보드를 이용하여 구성하였다. 그리고, 실험에 의해서 제안된 퍼지 제어기 가 실시간 이동물체 추적 시스템에 적용 가능함을 확인 하였다.

모폴로지 기반의 차영상 분석기법을 이용한 균열검출의 인식 (The Recognition of Crack Detection Using Difference Image Analysis Method based on Morphology)

  • 변태모;김장형;김형수
    • 한국정보통신학회논문지
    • /
    • 제10권1호
    • /
    • pp.197-205
    • /
    • 2006
  • 본 논문에서는 비젼 시스템을 이용하여 이동 물체를 추적하는 방법을 제안하였다. 이동 물체를 계속적으로 추적하기 위해서는 이동 물체의 영상이 화상의 중심점 부근에 위치하도록 해야 한다. 따라서 이동 물체의 영상이 화상의 중심점의 부근에 위치하도록 하기 위하여 팬/틸트(Pan/Tilt)구조의 카메라 모듈을 제어하는 퍼지 제어기를 구현하였다. 향후, 시스템을 이동로봇에 적용하기 위하여 비젼 시스템을 위한 영상처리보드를 설계 제작하였고, 대상물체의 색상과 형태를 파악한 후 퍼지 제어기를 이용하여 카메라모듈이 물체를 추적할 수 있도록 StrongArm 보드를 이용하여 구성하였다. 그리고, 실험에 의해서 제안된 퍼지 제어기 가 실시간 이동물체 추적 시스템에 적용 가능함을 확인 하였다.

태양에너지를 이용한 열-전기 동시생산을 위한 PV-Solarwall 단위모듈 성능평가 연구 (The Performance Evaluation Study of PV-Solarwall Unit Module Solar Thermal-Electric Energy)

  • 김용환;조일식;이의준;현명택;강은철
    • 한국태양에너지학회 논문집
    • /
    • 제25권3호
    • /
    • pp.69-75
    • /
    • 2005
  • The PV-Solarwall system has been introduced as a promising alternative to harness solar energy for both heating applications and electricity generation simultaneously. The system comprises a PV solar panel(for electricity generation). In addition, the solarwall incorporates a fan strategically located behind the PV panel to bring the warm and fresh air from the solarwall into the room. Because of its location and convective cooling principle, the fan also serves to reduce the operating temperature of the PV panel thereby increasing its efficiency. So this PV-Solarwall system holds much promise for saving heating and electricity costs compared with a PV system without solarwall. In particular, by controlling the tilt angle of the entire PV-Solarwall system between $0^{\circ}$(horizontal) and $90^{\circ}$(vertical), the performance of the system can be further evaluated. It is expected that the range of tilt angle PV-Solarwall between $40^{\circ}$ and $50^{\circ}$ will improve the output of the system.

0.13㎛ 기술의 shrink에 따른 DC Parameter 매칭에 관한 연구 (A Study on the DC parameter matching according to the shrink of 0.13㎛ technology)

  • 문성열;강성준;정양희
    • 한국전자통신학회논문지
    • /
    • 제9권11호
    • /
    • pp.1227-1232
    • /
    • 2014
  • 본 논문은 기존의 poly length만의 축소와 달리 입, 출력 소자를 포함한 core 디바이스의 $0.13{\mu}m$ 디자인을 10% 축소하는 것으로 여러 채널 길이에 따른 body effect와 doping profile simulation을 해석하였다. 축소 전의 DC 파라미터 매칭을 위하여 게이트 산화막의 decoupled plasma nitridation 처리와 LDD(Lightly Doped Drain) 이온주입 전 TEOS(Tetraethylortho silicate) 산화막 $100{\AA}$ 그리고 LDD 이온주입을 22o tilt-angle(45o twist-angle)로 최적화하였고 그 결과 축소 전의 5%의 범위에서 매칭됨을 확인하였다.

지능형 감시 시스템 구축을 위한 영상과 음원 추적 기반 임베디드 모바일로봇 개발 (A Design of Mobile Robot based on Camera and Sound Source Localization for Intelligent Surveillance System)

  • 박정현;김형복;오정석;심귀보
    • 한국지능시스템학회논문지
    • /
    • 제19권4호
    • /
    • pp.532-537
    • /
    • 2009
  • 보안이 중요시되는 공간에서 임의의 사람을 추적하고 인식할 수 있는 시스템의 필요성이 점차 중요시 되고 있다. 본 논문에서는 영상과 음원 추적 기반의 임베디드 모바일 로봇을 개발함으로써 무인 지능형 시스템을 구현하였고 영상에서 객체 추적을 위해 블록 매칭 알고리즘을 이용하고 음원 추적을 위해 소리의 시간차와 세기차를 이용하여 시스템을 구현 하였다. 본 논문에서는 Pan-Tilt 카메라와 음원 추적 모듈을 이용한 시스템, Network 카메라와 모바일 로봇을 이용한 시스템과 모바일 로봇을 이용한 시스템을 구현함으로써 침입자 추적 알고리즘을 검증하였다. 각 구현된 시스템에서 문제점을 보완하고 서로 연동이 가능한 시스템을 구현하여 지능형 무인 감시 시스템으로 신뢰성을 더할 수 있을 것이다.

태양광 모듈의 구조디자인과 설치각도에 따른 출력예측 (Prediction of Output Power for PV Module with Tilted Angle and Structural Design)

  • 고재우;윤나리;민용기;정태희;원창섭;안형근
    • 전기학회논문지
    • /
    • 제62권3호
    • /
    • pp.371-375
    • /
    • 2013
  • A new model about output power prediction of PV module with various tilted angles and cell to cell distances has been proposed in this paper. Light intensity arrived on a solar cell could be changed by characteristics of PV module materials. Refractive indices, thickness and absorption coefficients of glass, EVA, solar cell and Backsheet are used to predict output. Also, the incident angle of light is changed 0 to 90[$^{\circ}$] and cell to cell distances are 5, 10 15[mm]. Two types of light incident on a solar cell are considered which are direct to a solar cell and reflected from Backsheet. The intensity of the incident light directly into the solar cell is reduced through glass and EVA about 17.5[%] in theoretical way. It has an error of 2.26[%] compared with experimental result. The results for compare theoretical with experimental data is validated within the error of 6.3[%]. This paper would be a research material to predict output power when the PV module is installed outdoor or a building.