• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.3
• /
• pp.149-157
• /
• 1998

Seasonal changes of topography, sediment grain size and accumulation rate in the Gomso-Bay tidal flat, west coast of Korea, have been studied in order to understand the seasonal accumulation pattern and preservation potential of the tidal-flat sediments. Seasonal levelings across the tidal flat show that the landward movement of both intertidal sand shoals and cheniers accelerates during the winter and typhoon periods, but it almost stops in summer when mud deposition is instead predominant at the middle and upper tidal flats. Seasonal variations of mean grain size were largest on the upper part of middle tidal flat where summer mud layers were eroded during the winter and typhoon periods. Measurements of accumulation depths from sea floor to basal plate reveal that accumulation rates were seasonally controlled according to the elevation of tidal-flat surface. The upper tidal flat where the accumulation rate of summer was generally higher than that of winter was characterized by a continuous deposition throughout the entire year, whereas in the middle tidal flat, sediment accumulations were concentrated in winter relative to summer and were intermittently eroded by typhoons. The lower tidal flat were deposited mostly in winter and eroded during summer typhoons. Can cores taken across the tidal flat reveal that sand-mud interlayers resulting from such seasonal changes of energy regime are preserved only in the upper part of the deposits and generally replaced by storm layers downcore. Based on above results, it is suggested that the storm deposits by winter storms and typhoons would consist of the major part of the Gomso-Bay sediments.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.263-275
• /
• 2020

In this study, DEMs (Digital elevation model) based on LIDAR, TanDEM-X and UAV (Unmanned Aerial Vehicle) are used to analyze topographic change of Gomso tidal flat during a few years. DEM from LIDAR data was observed at 2011 by KHOA (Korean hydrographic and oceanographic agency) and DEM based on TanDEM-X data was generated at Lee and Ryu (2017). UAV data was observed at KM and KH area of Gomso tidal flat. KM area was surveyed at MAY and AUG 2019, and KH area was surveyed at APR 2018 and MAY 2019. During research period, 2011 to AUG 2019, elevation of KM area is decreased 0.24 m in average, and Chenier is retreat to landward about 130 m. In KH area, elevation is increased 0.16 m in average during research period, 2011 to MAY 2019. It is expected that multi-platform remotely sensed data can help to study accurate topographic change of tidal flat.

• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.411-420
• /
• 2022

Recently, research using remote sensing has been active in various fields such as environment, science, and society. The results of research using remote sensing are not only numerical results, but also play an important role in solving and preventing social and scientific problems. The purpose of this thesis is to tell the correlation between the data provided and each data by using remote sensing technology for the tidal flat environment. The purpose of this study is to obtain high-resolution data using artificial satellites during remote sensing to find out information on tidal flat currents. Tidal flats created by erosion, sedimentation, low tide, and high tide contain information about the tidal flat slope and information about the ecosystem. Therefore, it can be considered as one of the very important studies to analyze the overall tidal flow channel. This paper creates a DEM (Digital Elevation Model) through TanDEM-X, and DEM is used as the most basic data to create a tidal channel. The research area is a tidal flat located in the middle of the west coast of Ganghwado tidal flat. By analyzing the tidal channel created, various information such as the slope direction of Ganghwado tidal flat and the shape of the tidal channel can be grasped. It is expected that the results of this study will increase the importance and necessity of using DEM data for tidal flat research in the future, and that high-quality results can be obtained.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.497-510
• /
• 2010

In this study, comparisons of the backscattering coefficients and the coherence values which had been extracted from SAR (Synthetic Aperture Radar) images such as JERS-1, ENVISAT and ALOS satellites with surface roughness, surface geometric and soil moisture content were carried out. As the results of analysis using the backscattering coefficient and coherence values from SAR images, the coherence was shown high in the region containing more of mud fraction due to higher viscosity of fine grain-size. A lot of tidal channels were well developed in the Ganghwa tidal flat, affecting the drainage of seawater and subsequent soil moisture content by exposure time of tidal flat. The backscattering coefficient. consequently, appeared to be lower in sand flat and mix flat with decrease of soil moisture. In contrast, most mud flats were distributed at high elevation so that soil moisture was not much influenced by seawater. The backscattering coefficient in mud flat seemed to have a relationship with the density of tidal channel. In addition, lowering backscattering coefficients in the all Ganghwa tidal flat was observed when surface remnant water increased according to the amount of rainfall. The correlation between backscattering coefficient, coherence and sediment environment factors in the Ganghwa tidal flat was investigated. In the future, more quantitative spatial analysis will be helpful to well understand the sedimentary influence of various sediment environment factors.

• Ocean and Polar Research
• /
• v.24 no.1
• /
• pp.63-71
• /
• 2002

This preliminary study on the changes of macrobenthic assemblages in experimental sediment fences was conducted as a part of tidal marsh restoration project. Intertidal sediment fences were designed to increase the efficiency of trapping sediments on unvegetated tidal flats in order to raise sediment elevation and to allow colonization of intertidal vegetation. Although increment of soil surface level was not observed over the first three months of the study, it was possible to obtain some effects of the sediment fence. Three months later, the particle sizes of the surface sediment at experimental plots became much finer compared to unfenced areas on the natural mudflats located in the same tide level as that of the plots. The difference was much greater on the plot with drainage canals than on the plot without ones. Species diversity of the experimental plots became much higher than that of natural sites. Perinereis aibuhitensis and Glauconome chinensis which were absent from initial community appeared with high density in the plot with drainage canals. Those species were significantly different in abundance between the experimental plot and the natural mudflat. Changes in species composition were not detected in another experimental plot without drainage canals.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.277-292
• /
• 2020

The purpose of this study is to propose the possibility of precise surface sedimentary facies classification and a more accurate classification method by generating the large-scale map of surface sedimentary facies based on UAV data and object-based image analysis (OBIA) for Hwang-do tidal flat in Cheonsu bay. The very high resolution UAV data extracted factors that affect the classification of surface sedimentary facies, such as RGB ortho imagery, Digital elevation model (DEM), and tidal channel density, and analyzed the principal components of surface sedimentary facies through statistical analysis methods. Based on principal components, input data to be used for classification of surface sedimentary facies were divided into three cases such as (1) visible band spectrum, (2) topographical elevation and tidal channel density, (3) visible band spectrum and topographical elevation, tidal channel density. The object-based image analysis classification method was applied to map the classification of surface sedimentary facies according to conditions of input data. The surface sedimentary facies could be classified into a total of six sedimentary facies following the folk classification criteria. In addition, the use of visible band spectrum, topographical elevation, and tidal channel density enabled the most effective classification of surface sedimentary facies with a total accuracy of 63.04% and the Kappa coefficient of 0.54.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.42-52
• /
• 2010

The purpose of this study is to produce digital elevation model (DEM) in the Jebu tidal flat, one of the west coast of the Korean Peninsula, by means of photogrammetric techniques from aerial digital stereo-images. Produced DEM would be become the fundamental data for change detection of the sediment and erosion. To do so, epipolar line is established by relative orientation. Area-based matching is then carried out based on this line and matching size according to surface property of tidal flat after a classified image is produced from reflectance and texture of the surface. As the results, DEM generated by the proposed method showed subtle changes in height more precisely than DEM using the fixed matching size and DEM by the commercial S/W in the region, such as tidal flats having few level differences.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.3
• /
• pp.93-105
• /
• 2004

Spatio-temporal distribution patterns of the major dominant species were assessed from bimonthly monitoring of macrotidal flat in Cheokjeon, Incheon, Korea between September 1990 and July 1992. Overall, macrofauna comprised a total of 111 species, 25,491 inds.136 ㎡. The result of Le Bris index, dominance ranking of the lead-ing species showed that the top 15 species accounting for 74.8% (19,072 inds.) of total density. In Cheokjeon tidal flat, some species were especially habitat-restricted such as genus Nephtys (Annelids; Polychaetes) and Mac-rophthalmus (Crustaceans; Decapods). Based on the density data, the five dominant species were the polychaetes Het-eromastus filiformis, the bivalves Mactra veneriformis and Solen strictus, the brachyurans Macrophthalmus japonicus, the holothuriodeans Protankyra bidentata. The results of one-way ANOVA, mean value of H. filiformis and M. ven-eriformis did not show significant changes with tidal elevation and sediment composition (p>0.05). But, other species (S. strictus, M. japonicus and P. bidentata) showed significant variations (p<0.001). In conclusion, these indicate significant spatial fluctuation with tidal elevation and sediment characteristics in some species.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.537-549
• /
• 2023

The distribution characteristics of tidal flat sediment components are used as an essential data for coastal environment analysis and environmental impact assessment. Therefore, a reliable classification map of surface sedimentary facies is essential. This study evaluated the applicability of regression kriging to generate a classification map of the sedimentary facies of tidal flats. For this aim, various factors such as the number of field survey data and remote sensing-based auxiliary data, the effect of regression models on regression kriging, and the comparison with other prediction methods (univariate kriging and regression analysis) on surface sedimentary facies classification were investigated. To evaluate the applicability of regression kriging, a case study using unmanned aerial vehicle (UAV) data was conducted on the Hwang-do tidal flat located at Anmyeon-do, Taean-gun, Korea. As a result of the case study, it was most important to secure an appropriate amount of field survey data and to use topographic elevation and channel density as auxiliary data to produce a reliable tidal flat surface sediment facies classification map. In addition, regression kriging, which can consider detailed characteristics of the sediment distributions using ultra-high resolution UAV data, had the best prediction performance compared to other prediction methods. It is expected that this result can be used as a guideline to produce the tidal flat surface sedimentary facies classification map.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.552-561
• /
• 2023

The seafloor topography of Gomso Bay on the west coast of Korea was investigated using subtidal bathymetry and tidal-flat altimetry. Gomso Bay consists of 80% tidal flats and 20% subtidal zone, and is divided into an outer bay and an inner bay by the Jujincheon esturary channel. The outer bay tidal flat, has few tidal channels, has a concave topographic profile, and is characterized by the development of chenier and intertidal sand bars, giving it the appearance of gently sloping, dissipative beaches. The inner bay tidal flat has wide upper and middle tidal flats with a well-developed tidal channel system without cheniers. Moreover, the topographical cross-section between these tidal channels is convex upward, and shows the characteristics of a depositional environment greatly influenced by tidal channels and tidal action. An analysis of the horizontal movement of the tidal flat environment over the past 37 years investigating changes in the iso-depth lines in the Gomso-Bay tidal flat between 1981 and 2018 revealed that the Gomso-Bay tidal flat retreated gradually landward. As a result of analyzing the erosion and sedimentation characteristics of Gomso Bay, assuming that most of the water depth changes were due to changes in the elevation of the sea floor and sea level, an average of 1 cm (0 mm/y) of sediment was eroded in the outer bay over the past 37 years (1981-2018), In the inner bay, an average of 50 cm (14 mm/y) was deposited. Notably, the high tidal flats of the outer bay were largely eroded. Monitoring photographs of the coast showed that most of the erosion of the high tidal flats in the outer bay occurred in a short period around 1999 (probably 1997-2002), and that the erosion resulted from the erosion of sand dunes and high-tide beaches caused by temporarily greatly raised high tide levels and storms.