• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.23-30
• /
• 1997

Semiconductive SrTiO3 ceramic bodies were prepared by conventional ceramic powder processes in-cluding sintering in a reducing atmosphere. Sodium or potassium ions were diffused from the surface of the sintered bodies into the inner region using thermal diffusion process at 800-120$0^{\circ}C$. The effects of such ther-mal treatments on the electrical and chemical characteristics of the grain boundaries were investigated. The presence of sodium or potassium ions at grain boundaries produces non-linear current-voltage behaviors, electrical boundary potential barriers of 0.1-0.2eV, and threshold voltages of 10-70V. The diffused ions form diffusion layers with thicknesses of 20-50nm near the grain boundaries, reducing the concentration of strontium and oxygen.

• KCID journal
• /
• v.13 no.2
• /
• pp.262-273
• /
• 2006

The Soil and Water Assessment Tool (SWAT) model has been widely used in hydrology and sediment simulation worldwide. In most cases, the SWAT model is first calibrated with adjustments in model parameters, and then the validation is performed. However, very little study regarding the effects on SWAT estimation of subwatershed delineation was performed. Thus, the SWAT model was applied to the Doam-dam watershed with various threshold values in subwatershed delineation in this study to examine the effects on the number of subwatershed delineated on SWAT estimation. It was found the flow effect of subwatershed delineation is negligible. However there were huge variations in SWAT estimated sediment, T-N, and T-P values with the use of various threshold value in watershed delineation. Sometimes these variations due to watershed delineation are beyond the effects of parameter adjustment in model calibration and validation. The SWAT is a semi-distributed modeling system, thus, the subwatershed characteristics are assumed to be the same for all Hydrologic Response Unit (HRU) within that subwatershed. This assumption leads to variations in the SWAT estimated sediment and nutrient output values. Therefore, it is strongly recommended the SWAT users need to use the HUR specific slope length and slope value in model runs, instead of using the slope and the corresponding slope length of the subawatershed to exclude the effects of the number of subwatershed delineated on the SWAT estimation.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.7-13
• /
• 2014

In this paper, an effect on a GPS receiver by spoofing signal is analyzed and a GPS spoofing signal detection algorithm for GPS L1 C/A spoofing signal is proposed. A proposed detection algorithm monitors the correlation function distortion by the spoofing signal. If detected distortion is over a detection threshold, we can determine that the spoofing signal is received. The detection threshold is calculated from the statistical characteristics of a thermal noise. For verifying the suggested algorithm, a MATLAB-based simulation platform is implemented. This platform has functionalities to track GPS signal and measure the correlation values. By using this platform, the correlation function distortion by spoofing signal is observed. Also a performance of the algorithm proposed in this paper is applied and confirm the detection of a spoofing signal.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.3
• /
• pp.133-140
• /
• 2013

Objectives The aim of this clinical study was to find out the changes of self-reported pain intensity before and after balneothrapy in participants with low back pain. Methods In this study 20 participants with low back pain went through 5 weeks of balneothrapy course, once in a week. Each week visual analogue scale (VAS) and pain threshold were measured before and after balneothrapy, which consisted of 30 minutes of high pressure underwater shower ($32{\sim}36^{\circ}C$) and another 30 minutes of whole body bathing ($32{\sim}40^{\circ}C$). Results 1. The average of VAS significantly decreased from $64.00{\pm}16.35$ to $34.00{\pm}15.69$ after 5 weeks of balneothreapy (p<0.001). 2. The average of pain threshold significantly increased from $8.31{\pm}2.52$ lbf to $9.53{\pm}3.11$ lbf after 5 weeks of balneothreapy (p<0.05). Conclusions The results showed that 5 weeks of balneotherapy had significant effect on alleviating pain in low back pain participants, which means balneothreapy may be used as a complementary treatment on musculoskeletal diseases and other chronic diseases. Further studies are anticipated in the future to find out other various effects of balneothrapy.

• The Korean Journal of Pain
• /
• v.19 no.2
• /
• pp.131-136
• /
• 2006

Background: The aim of this study was to clarify the role of spinal groups II and III metabotropic glutamate receptors (mGluRs) with respect to postoperative pain at the spinal level. In addition, the nature of the pharmacological interaction between groups II and III mGluRs agonists and morphine was determined. Methods: Catheters were inserted into the intrathecal space of male SD rats. To induce postoperative pain, an incision was made in the plantar surface of the hind paw. A pharmacological characteristic for the interaction between groups II and III mGluRs agonists and morphine was evaluated using a fixed-dose analysis. Results: None of intrathecal group II and III mGluRs agonists modified the withdrawal threshold of the incisional pain. The administration of intrathecal morphine resulted in an increase of a dose dependent withdrawal threshold. A fixed-dose analysis revealed that the group III mGluRs agonist, ACPT-III, increased the antinociceptive action of morphine, while the group II mGluRs agonist, APDC, had no effect the antinociception of morphine. Conclusions: These results suggest that group II and III mGluRs may not play a direct modulatory role in the processing of postoperative pain at the spinal level. However, agonizing group III mGluRs may indirectly contributable to the potentiation of morphines antinociception in the spinal cord. Thus, the combination of morphine and a group III mGluRs agonist may be useful in the management of spinal postoperative pain.

• The Journal of Korean Physical Therapy
• /
• v.24 no.2
• /
• pp.82-89
• /
• 2012

Purpose: In this study, the effects of stability exercise, extracorporeal shock wave therapy, and taping on pain and function in patients with myofascial pain syndrome of upper trapezius were compared. Methods: The subjects were divided into the stability exercise, ESWT and the taping treatment group and the clinical outcomes were evaluated by visual analog scale (VAS), pressure pain threshold (PPT) and a constant-murley scale (CMS) at pre-treatment and post-treatment. Paired t-test and ANOVA was used for statistical analysis. Results: All groups were statistical significance in the change in visual analog scale (p<0.05). The difference between the ESWT group and taping group was statistical significance in the change in pressure pain threshold (p<0.05) except for the taping group. Using the constant-murley scale, the stability exercise group showed a significant decrease in pain, and a significant increase in ROM, ADL, strength, total score of shoulder (p<0.05); however, the ESWT group showed no difference on ADL. In addition, there was no difference in strength for the taping group. The comparison of the effect between the stability exercise group, ESWT group and taping group in CMS showed a statistical significant difference in pain, ADL and ROM (p<0.05). Conclusion: These results indicate that stability exercise, ESWT and taping could be considered an effective and efficient treatment modality for myofascial pain syndrome of upper trapezius.

• Tunnel and Underground Space
• /
• v.5 no.1
• /
• pp.22-40
• /
• 1995

Thermomechanical characteristics of rocks such as thermal shock, thermal expansion, thermal cracking were experimentally investigaed using Iksan granite, Cheonan tonalite and Chung-ju dolomite to obtain the basic data for proper design and Chung-ju dolomite to obtain the basic data for proper design and stability analysis of underground structures subjected to temperature changes. The effect of thermal shock did not appear when the heating speed was under 3$^{\circ}C$/min. and there existed little difference between multi-staged cyclic heating and single-cycled heating. Thermal expansion of rocks was affected by mineral composition, crack porosity and the degree of thermal craking. In quartz-beraring multimineralic rocks such as Iksan granite and Cheonan tonalite, the thermal expansion coefficient increaseed continuously with temperature rise, but that of Chung-ju dolomite which was a monomineralic rock showed a constant value for the temperature above 250$^{\circ}C$, Chung-ju dolomite yielded the lowest critical threshold temperature(Tc) of 100$^{\circ}C$ and unstable thermal cracking was initiated above the new threshold temperature(Tc')of 300$^{\circ}C$. Above Tc' thermal cracks grew but they were not interconnected. Iksan granite showed closing of microcracks to the temperature of 100$^{\circ}C$, then expanded linearly to Tc of 200$^{\circ}C$. Above Tc, thermal cracking was initiated and progressed rapidly and almost all the grain boundaries were cracked at 600$^{\circ}C$. Cheonan tonalite also showed similar behavior to iksan granite except that Tc was 350$^{\circ}C$ and that thermal cracks propagated more rapidly. Thermal expansions calculated by Turner's equation were found to be valid in predicting the thermal expansion and cracking behavior of rocks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.2002-2007
• /
• 1999

In this paper, the n-channel poly-Si thin-film transistors (poly-Si TFT's) formed by solid phase crystallization (SPC) on glass were investigated by measuring the electrical properties of poly-Si films, such as I-V characteristics, mobility, leakage current, threshold voltage, and subthreshold slope. It is done to decide to be applied on TFT-LCD with large-size and high density. In n-channel poly-Si TFT with 2, 10, 25$\mu\textrm{m}$ of channel length, the field effect mobilities are 111, 126 and 125 $\textrm{cm}^2$/V-s and leakage currents are 0.6, 0.1, and 0.02 pA/$\mu\textrm{m}$, respectively. Low threshold voltage and subthreshold slope, and good ON-OFF ratio are shown, as well. Thus, the poly-Si TFT’s used by SPC are expected to be applied on TFT-LCD with large-size and high density, which can integrate display panel and peripheral circuit on a large glass substrate.

• Journal of Internet Computing and Services
• /
• v.8 no.1
• /
• pp.15-23
• /
• 2007

Wireless LAN (IEEE 802.11) uses traditional TCP for reliable data transmission, But it brings the unintentional packet loss which is not congestion loss caused by handoff, interference, and fading in wireless LAN. In wireless LAN, TCP experiences performance degradation because it consumes that the cause of packet loss is congestion, and it decrease the sending rate by activating congestion control algorithm. This paper analyzes that correlation of throughput and buffer size for wireless buffer tuning. We find MBT (Maximum Buffer Threshold) which does not increase the throughput through the analysis, For calculation of MBT, we experiment the throughput by using high volume music data which is creased by real-time performance of piano. The experiment results is shown that buffer tuing based on MBT shows 20.3%, 21.4%, and 45.4% throughput improvement under 5ms RTT, 10ms RTT, and 20ms RTT, respectively, comparing with the throughput of operation system default buffer size, In addition, we describe that The setting of TCP buffer size by exceeding MBT does not have an effect on the performance of TCP.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.154-154
• /
• 2012

Flexible complementary inverters based on thin-film transistors (TFTs) are important because they have low power consumption and high voltage gain compared to single type circuits. We have manufactured flexible complementary inverters using pentacene and amorphous indium gallium zinc oxide (IGZO) for the p-channel and n-channel, respectively. The circuits were fabricated on polyimide (PI) substrate. Firstly, a thin poly-4-vinyl phenol (PVP) layer was spin coated on PI substrate to make a smooth surface with rms surface roughness of 0.3 nm, which was required to grow high quality IGZO layers. Then, Ni gate electrode was deposited on the PVP layer by e-beam evaporator. 400-nm-thick PVP and 20-nm-thick ALD Al2O3 dielectric was deposited in sequence as a double gate dielectric layer for high flexibility and low leakage current. Then, IGZO and pentacene semiconductor layers were deposited by rf sputter and thermal evaporator, respectively, using shadow masks. Finally, Al and Au source/drain electrodes of 70 nm were respectively deposited on each semiconductor layer using shadow masks by thermal evaporator. The characteristics of TFTs and inverters were evaluated at different bending radii. The applied strain led to change in voltage transfer characteristics of complementary inverters as well as source-drain saturation current, field effect mobility and threshold voltage of TFTs. The switching threshold voltage of fabricated inverters was decreased with increasing bending radius, which is related to change in parameters of TFTs. Throughout the bending experiments, relationship between circuit performance and TFT characteristics under mechanical deformation could be elucidated.