• Geomechanics and Engineering
• /
• v.22 no.3
• /
• pp.265-275
• /
• 2020

As a flexible supporting structure, the anchoring frame structure is widely adopted to support multistage slopes in high earthquake-intensity area for its effectiveness and practicality. The previous study indicates that the anchor of anchoring frame structure is the most likely to be damaged during earthquakes. It is crucial to determine the pull-out capacity of anchor against seismic force for the seismic design of anchoring frame structure. In this study, an analytical model of a three-stage slope supported by anchoring frame structure is established, and the upper bound method of limit analysis is applied to deduce the seismic anchor force of anchoring frame structure. The pull-out capacity of anchor against seismic force of anchoring frame structure at each stage is obtained by computer programming. The proposed method is proved to be reasonable and effective compared with the existing published solution. Besides, the influence of main parameters on the pull-out capacity of anchor against seismic force is analyzed to provide some recommendations for the seismic design of anchoring frame structure.

• Geomechanics and Engineering
• /
• v.14 no.3
• /
• pp.271-281
• /
• 2018

A jointed rock slope stability evaluation was simulated by a discontinuous deformation analysis numerical method to investigate the process and safety factors for different crack distributions and different overloading situations. An optimized method using Discontinuous Deformation Analysis for Rock Failure (DDARF) is presented to perform numerical investigations on the jointed rock slope stability evaluation of the Dagangshan hydropower station. During the pre-processing of establishing the numerical model, an integrated software system including AutoCAD, Screen Capture, and Excel is adopted to facilitate the implementation of the numerical model with random joint network. These optimizations during the pre-processing stage of DDARF can remarkably improve the simulation efficiency, making it possible for complex model calculation. In the numerical investigations on the jointed rock slope stability evaluations using the optimized DDARF, three calculation schemes have been taken into account in the numerical model: (I) no joint; (II) two sets of regular parallel joints; and (III) multiple sets of random joints. This model is capable of replicating the entire processes including crack initiation, propagation, formation of shear zones, and local failures, and thus is able to provide constructive suggestions to supporting schemes for the slope. Meanwhile, the overloading numerical simulations under the same three schemes have also been performed. Overloading safety factors of the three schemes are 5.68, 2.42 and 1.39, respectively, which are obtained by analyzing the displacement evolutions of key monitoring points during overloading.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.1
• /
• pp.82-91
• /
• 2009

Research was initiated to investigate vegetation characteristics of native ('Pureundle' and 'Sewon') and introduced ('Brilliant' and 'Midnight') Kentucky bluegrass (KB, Poa pratensis L.) varieties by soil-seed applying system on a cut-slope in May 17, 2008. There were no statistic differences observed in soil hardness and soil moisture content while significant differences were observed in surface coverage rate, height and disease occurrence in native and introduced KB varieties. The introduced 'Brilliant' KB was highest in the surface coverage rate from the early period of seeding to August 11, 2008. The surface coverage rate of introduced varieties were high when compared to native varieties in their early growth stage. But native varieties reached to equal surface coverage rate with the introduced varieties when three months after seeding. The height of 'Pureundle' and 'Brilliant' KBs were high compared with Midnight and Sewon KBs. 'Pureundle' and 'Brilliant' KBs were damaged by disease whereas there were no disease occurrence in 'Midnight' and 'Sewon' KBs. Probably, the disease occurrence was close related with the height of KBs not with native and introduced KB varieties. These results indicate that the growth of KB on a cut-slope are statistically affected by varieties in early growth stage of this experiment but reach equal rate between native and introduced KB varieties in three months after seeding. This growth characteristics implies the huge potential of native KB varieties seeding for cut-slope vegetation. Considering that native KB varieties are adapted to a environment and have no risk of causing disturbance to the ecosystem compared to the introduced KB varieties, the use of them as native varieties for a cut-slope vegetation can be increased.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.2
• /
• pp.13-23
• /
• 2019

In this study, an overtopping model experiments and three dimensional seepage characteristics at the deteriorated homogeneous reservoirs were performed to investigate the behavior of failure for embankment and spillway transitional zone due to overtopping. The failure pattern, pore water pressure, earth pressure and settlement by overtopping were compared and analyzed. The pattern of the failure by overtopping was gradually enlarged towards reservoirs crest from the spillway transition zone at initial stage. In the rapid stage and peak stage, the width and depth of failure gradually increased, and the pattern of the failure appeared irregular and several direction of the erosion. In the early stage, the pore water pressure at spillway transitional zone was more affected as its variation and failure width increased. In the peak stage, the pore water pressure was significantly increased in all locations due to the influence of seepage. The earth pressure increased gradually according to overtopping stage. The pore pressure by the numerical analysis was larger than the experimental value, and the analysis was more likely to increase steadily without any apparent variation. The horizontal and vertical displacements were the largest at the toe of slope and at the top of the dam crest, respectively. The results of this displacement distribution can be applied as a basis for determining the position of reinforcement at the downstream slope and the crest. The collapse in the overtopping stage began with erosion of the most vulnerable parts of the dam crest, and the embankment was completely collapsed as the overtopping stage increased.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.1
• /
• pp.88-93
• /
• 1999

In modern period, the history of highway landscaping can be divided into three stages. The first stage from the late 1960s to the early 1970s : during this period revegetation operation started and landscape architecture was introduced. The second stage from the late 1970s to the early 1980s : during this period the definition of functional planting which had played the most important role in highway landscaping was established. Also, highway landscaping was influenced by Japan, and the revegetation of highway slopes were applied with Seedspray, Block-sodding methods, and so on. The third stage from late 1980s to the present : during this period eco-landscaping was introduced and began to mix with ecosystem techniques. The revegetation works of cutting-rock slopes have widely been developed. Many people think that landscaping is necessary for us, and that revegetation method is effective to conserve slope environment. Based on accumulated data we have to improve the function of landscaping and revegetation method, and also have to establish the method of landscaping harmonized with our own landscape.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.2
• /
• pp.79-85
• /
• 1989

The generation and propagation of shelf wave-like oscillations induced by local wind at a basin with continental shelf and slope are studied by a numerical experiment. Three types of vortices are generated along western boundary and they propagate along the boundaries in the counter-clockwise direction. The first vortex is generated at the early stage of wind stress and its center is located off the continental slope. The second type centered on the continetal slope is generated at about the terminating time of wind stress and follows the first one. The third, centered on continental shelf, decays so soon that its propagation pattern is hard to be identified. Each of those vortices is probably to be one of free modes of the model basin.

• Geomechanics and Engineering
• /
• v.32 no.6
• /
• pp.639-652
• /
• 2023

Stepped earth slopes incorporated with anti-slide piles are widely utilized in landslide disaster preventions. Explicit consideration of the three-dimensional (3D) effect in the slope design warrants producing more realistic solutions. A 3D limit analysis of the stability of pile stabilized stepped slopes is performed in light of the kinematic limit analysis theorem. The influences of seismic excitation and surcharge load are both considered from a kinematic perspective. The upper bound solution to the factor of safety is optimized and compared with published solutions, demonstrating the capability and applicability of the proposed method. Comparative studies are performed with respect to the roles of 3D effect, pile location, pile spacing, seismic and surcharge loads in the safety assessments of stepped slopes. The results demonstrate that the stability of pile reinforced stepped slopes differ with that of single stage slopes dramatically. The optimum pile location lies in the upper portion of the slope around L_x/L = 0.9, but may also lies in the shoulder of the bench. The pile reinforcement reaches 10% universally for a looser pile spacing D_c/d_p = 5.0, and approaches 70% when the pile spacing reaches D_c/d_p = 2.0.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.2
• /
• pp.47-59
• /
• 2023

This study investigated and analyzed the effects of vegetation on the roadside slopes at the expressway construction sites in order to evaluate the vegetation recovery regarding soil type and revegetation technique. We selected two study sites with an area of 1,000 m² located in the construction sites of the Korea Expressway Corporation, named Hwado-Yangpyeong Expressway Section 3 and Saemangeum-Jeonju Expressway Section 7. The revegetation was monitored in three plot groups (earth, soft rock, and hard rock slopes), and scored based on the guideline of the Ministry of Land, Transport and Maritime Affairs. The revegatation was generally lower in the Hwado-Yangpyeong site than that of the Saemangeum-Jeonju site. The field monitoring indicated that the revegetation varied with slope aspect and environmental characteristics between plots. the Saemangeum-Jeonju site showed a high overall evaluation score, but there was a slight difference in the score for each plot. This seems to be due to the differences in geographical conditions, construction methods, and site environment between two sites. This study can provide basic information to understand the short-term effects of revegetation techniques in the roadside slopes.

• Steel and Composite Structures
• /
• v.47 no.4
• /
• pp.451-454
• /
• 2023

Landslides are one of the natural disasters that cause a lot of financial and human losses every year It will be all over the world. China, especially. The Mainland China can be divided into 12 zones, including 4 high susceptibility zones, 7 medium susceptibility zones and 1 low susceptibility zone, according to landslide proneness. Climate and physiography are always at risk of landslides. The purpose of this research is to prepare a landslide hazard map using the Hierarchical Analysis Process method. In the GIS environment, it is in a part of China watershed. In order to prepare a landslide hazard map, first with Field studies, a distribution map of landslides in the area and then a map of factors affecting landslides were prepared. In the next stage, the factors are prioritized using expert opinion and hierarchical analysis process and nine factors including height, slope, slope direction, geological units, land use, distance from Waterway, distance from the road, distance from the fault and rainfall map were selected as effective factors. Then Landslide risk zoning in the region was done using the hierarchical analysis process model. The results showed that the three factors of geological units, distance from the road and slope are the most important have had an effect on the occurrence of landslides in the region, while the two factors of fault and rainfall have the least effect The landslide occurred in the region.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.2
• /
• pp.90-97
• /
• 2005

This study aimed to address problems and suggest solutions in applying seed mixture design criterior of slope revegetation works according to the "Slope revegetation design and guidelines(proposed)" proposed by the Ministry of Construction and Transportation. To do this, a proper thickness of attaching soil media was identified in April experiment where the thickness and slopes varied. The results were as follows. In the test, the coverage rate of plot where exotic grass was not sowed increased with time and was 79.3% after three months of seeding, which indicated less risk of soil erosion. When applying the provisional standards of the plant mix proposed by the Ministry of Construction and Transportation, tree seeds and native plants were found ill in the early stage in all test lands due to exotic grass. This was because exotic grass which grew well in the early stage, could grow densely, so it might hamper the growth of other plants. When slope revegetation were planted and goals were set for herb, shrub and tree dominant mixture types, it was required to shift focus toward nursing up native plants first rather than early plantation of exotic grass.