• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.374-381
• /
• 2023

In a previous study, 'response surface methodology (RSM) using a fullest balanced model' was proposed to improve the optimization of food processing when a standard second-order model has a significant lack of fit. However, that methodology can be used when each factor of the experimental design has five levels. In response surface experiments for optimization, not only five-level designs, but also three-level designs are used. Therefore, the present study aimed to improve the optimization of food processing when the experimental factors have three levels through a new approach to RSM. This approach employs three-step modeling based on a second-order model, a balanced higher-order model, and a balanced highest-order model. The dataset from the experimental data in a three-level, two-factor central composite design in a previous research was used to illustrate three-step modeling and the subsequent optimization. The proposed approach to RSM predicted improved results of optimization, which are different from the predicted optimization results in the previous research.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2085-2098
• /
• 2016

Laminated busbars with a low stray inductance are widely used in NPC three-level inverters, even though some of them have poor performances in heat equilibrium and overvoltage suppression. Therefore, a theoretical method is in need to establish an accurate mathematical model of laminated busbars and to calculate the impedance and stray inductance of each commutation loop to improve the heat equilibrium and overvoltage suppression performance. Firstly, an equivalent circuit of a NPC three-level inverter laminated busbar was built with an analysis of the commutation processes. Secondly, on the basis of a 3D (three dimensional) cubical thermal model and mirror circulation theory, a supersymmetric mirror circulation 3D cubical thermal model was built. Based on this, the laminated busbar was decomposed in 3D space to calculate the equivalent resistance and stray inductance in each commutation loop. Finally, the model and analysis results were put into a busbar design, simulation and experiments, whose results demonstrate the accuracy and feasibility of the proposed method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.5
• /
• pp.807-820
• /
• 1997

This exploratory research was intended to develop and test a slacks pattern based upon conic model. Data came from measurements of photograph of three subjects. Silhouette of slacks was close fit on waist and hip and loose under hip level. This three-dimensional form was modeled with truncated cones. This conic model was truncated by plane of the waist level, the abdomen level, the hip level, the crotch level and the ankle level parallel to the floor. Two models that have differences in back part of the model were tested. Drafted patterns from two models were taken for each subject. Drafted experimental pattern was operated for slacks pattern. The first step was to make sideseam. Parts over crotch level were moved to both sides. And then to make waistdarts. Experimental pattern had two darts each in front and back. Each experimental slacks was evaluated by sensory test to appearance and comfort by five judges. The results can be summarized as follows. 1) Appearance and comfort of experimental pattern were judged to be satisfactory. Especially these patterns were fitted we18 in waist darts front and back. So we evaluated that was proper pattern for slacks. 2) Model 2 was better in appearance than model 1. But Model 1 was more comfortable in non significant difference. This was supposed to be resulted from fit more closely of model 2. 3) considering preceding results, this geometric model based upon truncated cone was applicable for slacks pattern.

• The Journal of Fisheries Business Administration
• /
• v.46 no.3
• /
• pp.103-118
• /
• 2015

The purpose of this paper is to discuss possibilities of applying growth curve models, such as Logistic, Log-Logistic, Log-Normal, Gompertz and Weibull, to three specific technology areas of Fishery Science and Technology in the process of measuring their technology level between Korea and countries with the state-of-the art level. Technology areas of hazard control of organism, environment restoration, and fish cluster detect were selected for this study. Expert panel survey was conducted to construct relevant panel data for years of 2013, 2016, and a future time of approaching the theoretical maximum technology level. The size of data was 70, 70 and 40 respectively. First finding is that estimation of shape and location parameters of each model was statistically significant, and lack-of-fit test using estimated parameters was statistically rejected for each model, meaning all models were good enough to apply for measuring technology levels. Second, three models other than Pearl and Gompertz seemed very appropriate to apply despite the fact that previous case studies have used only Gompertz and Pearl. This study suggests that Weibull model would be a very valid candidate for the purpose. Third, fish cluster detect technology level is relatively higher for both Korea and a country with the state-of-the-art among three areas as of 2013. However, all three areas seem to be approaching their limits(highest technology level point) until 2020 for countries with the state-of-the-art. This implies that Korea might have to speed up her research activities in order to catch up them prior to 2020. Final suggestion is that future study may better apply various and more appropriate models respectively considering each technology characteristics and other factors.

• Structural Engineering and Mechanics
• /
• v.18 no.1
• /
• pp.91-112
• /
• 2004

Concrete is a composite material and at meso-level, may be assumed to be composed of three phases: aggregate, mortar-matrix and aggregate-matrix interface. It is postulated herein that although non-linear material parameters are generally used to model this composite structure by finite element method, linear elastic fracture mechanics principles can be used for modelling at the meso level, if the properties of all three phases are known. For this reason, a novel meso-mechanical approach for concrete fracture which uses the composite material model with distributed-phase for elastic properties of phases and considers the size effect according to linear elastic fracture mechanics for strength properties of phases is presented in this paper. Consequently, the developed model needs two parameters such as compressive strength and maximum grain size of concrete. The model is applied to three most popular fracture mechanics approaches for concrete namely the two-parameter model, the effective crack model and the size effect model. It is concluded that the developed model well agrees with considered approaches.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.13-19
• /
• 1998

Stress relaxation tests have been performed under five different tensile strain levels and five different bending strain levels. Three different theoretical models have been developed based on four-element Burger's model, viscoelastic theory and viscous-viscoelastic theory. Experimental data were used to obtain parameters of the models and to verify accuracy of the models. Among the three theoretical models developed in this study, three-integral model (Model 3) based on viscous-viscoelastic theory showed the most exact estimations of stress relaxation under both tensile and bending strains and their correlation coefficients were greater than 0.99 for all the strain levels. Model 1 showed little initial stress relaxation. Model 2 showed excessive initial relaxation and, then, no relaxation after about 20 minute of strain application. Stress retention under strain decreased as strain increased, which means increased stress relaxation as strain increases. When the strain level was less than proportional limit, the effect of strain level on stress relaxation was not clearly shown. However, this effect was increased as strain level increased when strain level was greater than proportional limit.

• Korean System Dynamics Review
• /
• v.16 no.1
• /
• pp.53-74
• /
• 2015

The purpose of this paper is to simulate public trust on nuclear regulation policy. The first of all, public trust variables and the model were developed and analysed by system dynamic method. The model are consisted of the operator safety culture level, regulatory competence levels, the public satisfaction and public trust level. The scenario is made up three type which base scenario, the system operator's safety culture level and accident event level. First. the simulation results of standard scenario shows that rapidly declining public satisfaction and trust level of the national safety after Japan's nuclear accident in November 2011. Second, operator safety culture level and simulated divided into three levels. The results showed that a greater impact on the public satisfaction if bad than good case. Finally, the size of the accident was simulated divided into three levels levels(no accident, medium, serious accidents). the results showed a weak effect against the regulatory capacity and safety performance levels but showed a significant impact on public satisfaction and confidence level.

• Journal of the military operations research society of Korea
• /
• v.24 no.2
• /
• pp.95-116
• /
• 1998

Many different kinds of wargame models have been developed and used in training and analysis purpose. However, there has been few wargame model which analyze corps or division level operational analysis. Recently KIDA develops corps level operational analysis model based on START(simplified tool for analysis of regional treats) model developed by RAND. This model runs in a PC level with 2MB memory and provides one day combat results within 30 seconds. Only one or three person can operate this model and evaluate multiple corps level operational analysis including chemical effects, $C^3I$ capacity, new weapon system effectiveness and other qualitative effects. We tested this model and evaluated input and output data. We showed that this model can be applied in division level operational analysis also. As an example division level application procedure and sensitivity analysis data was provided. We also find some limitation and problems in the model and suggest application areas and improving methods.

• Korean System Dynamics Review
• /
• v.2 no.1
• /
• pp.93-112
• /
• 2001

Inter-Organizational Cooperation is the most common and important strategy in modern public and privet sectors managerial activities. In this paper the concepts of inter-organizational cooperation means not selfish cooperation as in the game circumstance and theory, but general collaborative action between organizations, they have share same goal. The achievement level of jointed-goal of inter-organization is depended upon the performance of cooperation, which resulted from the conditions and circumstances of cooperation. This paper analyses the effect of inter-organizational cooperation on achievement level of the jointed goal between two organizations with computer simulation model of the system dynamics approach. In the computer simulation model, three factors, goal perception, communication, and control, are considered as a key conditions of cooperation, which impact on the performance of cooperation. Simulation model was constructed with focus on the dynamic interactions between these three factors and the achievement level of jointed-goal. Consequently, the results found in this paper may provide further grounds for reducing the time delay that included in the conditions of cooperation.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1822-1829
• /
• 2015

In this study, artificial neural networks were used to determine the intensity of brightness in interior spaces. The illumination elements to illuminate indoor spaces were considered, not individually, but as a system. So, during the planned maintenance periods of an illumination system, after its design and installation, simple brightness level measurements must be taken. For a three-dimensional evaluation of the brightness level in indoor spaces in a speedy and accurate manner, the obtained brightness level measurement results and artificial neural network model were used. Upon estimation of the most suitable brightness level for indoor spaces by using the artificial neutral network model, the energy demands required by the illumination elements decreased. Consequently, in this study, with estimations of brightness levels, the extent to which the artificial neutral networks become successful was observed and more correct results have been obtained in terms of both economy and usage.