• International Journal of Highway Engineering
• /
• v.6 no.1 s.19
• /
• pp.47-56
• /
• 2004

To determine the pure bond strength between substrate and its overlayed concrete material, a direct pull-off test method was introduced by using a bi-material cylinder with which a penny-shaped crack was mountained at its interface. First, to evaluate the stress magnification or concentration at the interface, the energy release rates of a penny-shaped interface crack in remote tension loading on a bi-material cylinder were determined in terms of different modulus ratios and undonded area ratios(crack ratios) using a commercial finite element program. Then the energy release rates were calibrated as non-dimensional values in consideration of structural dimensions and applied forces. And to evaluate whether this new pull-off test method gives sound test results, three different sizes of unbended area ratios were incorporated along their interface in bi-material cylinders(sulphur polymer concrete + old concrete). Test results showed that all specimens were broken off at their interfaces as intended. Also the FEM analyses and test results indicated that a bi-material specimen with unbended area ratio of 0.4$\sim$0.6 is suitable for best accurate testing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.167-170
• /
• 2005

The two-dimensional (2D) and three-dimensional (3D) diamond-like carbon (DLC) stamps for ultraviolet nanoimprint lithography (UV-NIL) were fabricated using two kinds of methods, which were a DLC coating process followed by the focused ion beam (FIB) lithography and the two-photon polymerization (TPP) patterning followed by nano-scale thick DLC coating. We fabricated 70 nm deep lines with a width of 100 nm and 70 nm deep lines with a width of 150 nm on 100 nm thick DLC layers coated on quartz substrates using the FIB lithography. 200 nm wide lines, 3D rings with a diameter of $1.35\;{\mu}m$ and a height of $1.97\;{\mu}m$, and a 3D cone with a bottom diameter of $2.88\;{\mu}m$ and a height of $1.97\;{\mu}m$ were successfully fabricated using the TPP patterning and DLC coating process. The wafers were successfully printed on an UV-NIL using the DLC stamp. We could see the excellent correlation between the dimensions of features of stamp and the corresponding imprinted features.

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.701-709
• /
• 1998

Many dental composites are Bis-GMA based resin which diluted with the more fluid monomer triethylenglycol dimethacrylate(TEGDMA). TEGDMA is often present in exess so that some quantity remains unreacted following photo-initiated polymerization. TEGDMA is a component of some resin composites which contributes to their cytotoxicity. The presence of dentin between resin composite and pulp space reduce the cytotoxicity in vitro. The root system from extrcted human third molar was removed and then a circular occlusal cavity 4mm in diameter was prepared, leaving a remaining dentinal thickness to the roof of the pulpal chamber within the range 1.0-1.5mm. Dentine was treated with 37% phosphoric acid prior to Z 100 placement without using bonding resin(group 1). In group 2, SMP(Scotchbond Multi Purpose) primer, bonding resin prior to Z 100 placement were applied sequently. In group 3, moulds with internal dimensions 4mm diameter by 2mm depth were used to contain the composite alone with an equvalent mass on tooth model, and then they were immersed directly into water. The purpose of this study is to evaluate the release rate and quantity of TEGDMA with or without the application of bonding resin. Both release rate and total cumulative amount of TEGDMA for the three groups were determined using reversed-phase HPLC at times up to 10 days. The results were as follows: 1. All experimental groups showed the highest rate of release was in the first sample period(0-4.32 min) and the rate of release declined exponentially thereafter. 2. The maximum release rate and total cumulative account of TEGDMA in the tooth model of group 1 and group 2 with the use of SMP bonding resin were reduced however ther were no significant differences between these groups(P>0.05). 3. In the first sample period(0-4.32 min), the rate of release of TEGDMA from composite resin in group 3 immersed directly into water was significantly higher than that in group 1 and group 2 of tooth model(P<0.05). Conclusively, TEGDMA diffusion from Z 100 resin was not effectively prevented by the presence of dentin in spite of using the SMP bonding resin.

• Journal of Families and Better Life
• /
• v.14 no.3
• /
• pp.211-222
• /
• 1996

The purpose of this study is to classify the expenditure behaviors of housewives into some types and to identify the characteristics of the types focucing on diverse expenditure behaviors of urban households. In this study it is assumed that the expenditure behaviors are classified by there factors-(1)the orientation of money saving (2)the orientation of time saving and (3)the orientation of others. The present study suggests following three questions. (1). Can the expenditure behaviors of urban housewives be classified according to the orientation of money saving the orientation of others? (2) What distictions exist among the types? (3) Which variables are useful in classifying the expenditure behaviors? For empirical analysis the data of the study was collected from 650 housewives living in Seoul. The statistical methods adopted for data analysis are frequency percentage mean Pearson's correlation coefficient factor analysis cluster analysis one way ANOVA Duncun's multiple ran e test and discriminant analysis. As the major findings 4 types were extracted, According to the level of each dimensions the names for the each type were given as "the type of attaching importance to money saving" "the type of attaching importance to time and appearance" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and appearance" In "the type of attaching importance to money saving" the significant portion of housewives have high school degrees and compared with other types this type includes more husbands having sales and service job 55% of housewives of "The type of attaching importance to time and appearance" have graduate or higher degrees. The significant part of earned incomes range from 3 million won to 5 million won. The rate of housewives employed in the professional job is higher than other types. In "The type of attaching importance to money saving and time" the rate of the employment of housewives in this type is the highest among the types. In "The type of attaching importance to money saving and appearance" the significant portion of housewives have graduate degrees. In the jobs of he spouses the management job is major. The consciousness of belonging to the middle class is higher than other types. In this type the level of education is high but that of income is not. The result of the discriminant analysis says that the earned income and the consciousness of belonging to a calss are the most critical variables to classify the expenditure behaviors into 4 type The accuray of the classification of the discrimination equation composed of these variables is 47,5% The accuracy is improved by 10%.

• Journal of Radiation Protection and Research
• /
• v.36 no.4
• /
• pp.200-208
• /
• 2011

The neutron fluence measurement and evaluation technology is very important for material irradiation test. The most essential technology in this study is the neutron irradiation evaluation method using a fluence monitor. The fluence monitors were fabricated with metal wires of the purity ${\geq}$ 99.9%, whose dimensions were 0.1mm diameter, about 3 mm length, and around 150-200 ${\mu}g$ mass range. Three wire samples (Fe, Ni, Ti) were prepared for one irradiation aluminum capsule. Five capsules were irradiated in the OR5 hole of the HANARO reactor at 30 MW power for about 25 days. After irradiation tests, radiation activities were measured with the high purity germanium (HPGe) detector. The reaction rates were calculated by using the measured radiation activity data, and then neutron fluence were obtained from the reaction rates and the weighted neutron cross section with calculated neutron spectrum at the fluence monitor position.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.339-351
• /
• 2016

Current study conducted to verify the impact of emotional labor by Rapport on job burnout and organizational satisfaction from five-star hotel chefs located in Seoul. Survey distributed to employees who are working for department of foodservice from ten five-star hotels, and total 257 respondents were employed for data analysis. The Rapport was tested by using two sub-variables: enjoy relationship and personal bond, the emotional labor were measured by three sub-dimensions: surface behavior, emotional behavior, and inner behavior. Results found that enjoy relationships and personal bonds have significant influence on surface behavior, but the rapport have not significant impact on emotional behavior. In addition, only personal bond of rapport has significant influence on personal bon in present study. Furthermore, all elements of emotional behavior except surface behavior were significant predictors of job burnout, and organizational satisfaction. Hence, this study contributed to provide various practical implication as well as theoretical implications to managers or organizers of five-star hotels especially for foodservice employees.

• Survey Research
• /
• v.5 no.1
• /
• pp.51-78
• /
• 2004

This paper examines political leaders' image based on the concepts of social identity and distance. These concepts come from the two ideas: (1) Individuals create events to confirm the sentiments that they have about themselves and others in the current situation. (2) During this process structured sets of beliefs (social identity) about attributes of various entities are formed. Statistical analysis of the data from college students in Seoul offers three main findings. First, attributes clustered into four major groups-sociability, responsibility, power and activity. Sociability concerns as sense of approval or disapproval that can elaborated into closeness and intimacy. Responsibility relates to the judgement of morality, public obligation, or other standards. Power refers to social power, physical magnitude and so on. Activity indexes an entity's spontaneity, which can be elaborate into judgements of agency, speed and so on, Second, respondents evaluate negatively political leaders at the dimensions of sociability, responsibility, and activity, They are positively evaluated only at the dimension of power. Third, political leaders who are felt to be closer than others seem to have more political support nowadays.

• Korean journal of communication and information
• /
• v.66
• /
• pp.59-86
• /
• 2014

This study explored how rumor is diffused via Twitter and how the characteristics of rumor affect the interactivity among users in the Korea-U.S. FTA case. A key word search located three issues as major ones related to the Korea-U.S. FTA: appendectomy myth, collapse of health insurance, and increases in medicine prices. The arousal of rumor has two dimensions: fact and expression. The fact arousal was the highest in the issue of 'appendectomy myth', and the expression arousal the highest in 'increases in medicine prices'. The rumor diffusion took the 'explosive wave' in the issue of appendectomy myth, the 'latent wave' in the issue of increase in medicine prices, and the 'repetitive wave' in the issue of collapse of health insurance. Correlation analyses revealed a high correlation between the arousal intensity of rumor and the user interactivity in the issue of collapse of health insurance. The study showed that Twitter took a role of diffusing negative messages about the Korea-U.S. FTA. Results implies that government officials and journalists pay attention to Twitter for sensing the public opinion when building policies and managing crises.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.583-590
• /
• 2018

The objective of this study is to present a resistance performance map developed using the dimension parameters of a bilge keel appendage attached to a fishing vessel using CFD. The dimension parameters consist of three length and breadth measures of a bilge keel appendage from nine selected cases. The size of a bilge keel attached to an existing ship should be 90 % of the ship length and 5 % of the ship breadth. In this study, bilge keels with a length of 63 %, 77 % and 90 % and a breadth of 5 %, 7 % and 9 % were considered based on ship length and breadth. The effective power in each of the nine cases was predicted using CFD. Based on results from an existing ship, effective power in the case with the shortest length and longest breath was reduced by 0.3 %. The case with the longest length and breadth showed an increase in effective power of 1.7 %. The case with the shortest length and breadth showed a decrease in effective power of 2.3 %. The proposed map can be utilized to select dimensions according to the sailing and work patterns of fishing vessels from the perspective of resistance performance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.78-91
• /
• 2017

In this study, we conducted a comparative study on user's perception and behavior on public system service (PSS) using institutionalism theory and MGA (multi-group analysis) methodology. In particular, this study focuses on how institutional isomorphism is applied to public system services and how MGA can be implemented correctly in a variance based SEM (structural equation model) such as PLS (partial least square). A data set of 496 effective responses was collected from pubic system users and an empirical research was conducted using three segmented models categorized by public proximity theory (public firms = 113, government contractors = 210, private contractors = 173). For rigorous group comparisons, each model was estimated by the same indicators and approaches. PLS-SEM was used in testing research hypotheses, followed by parametric and non-parametric PLS-MGA procedures in testing categorical moderation effects. This study applied novel procedures for testing composite measurement invariance prior to multi-group comparisons. The following main results and implications are drawn : 1) Partial measurement invariance was established. Multi-group analysis can be done by decomposed models although data can not be pooled for one integrated model. 2) Multi-group analysis using various approaches showed that proximity to public sphere moderated some hypothesized paths from quality dimensions to user satisfaction, which means that categorical moderating effects were partially supported. 3) Careful attention should be given to the selection of statistical test methods and the interpretation of the results of multi-group analysis, taking into account the different outcomes of the PLS-MGA test methods and the low statistical power of the moderating effect. It is necessary to use various methods such as comparing the difference in the path coefficient significance and the significance of the path coefficient difference between the groups. 4) Substantial differences in the perceptions and behaviors of PSS users existed according to proximity to public sphere, including the significance of path coefficients, mediation and categorical moderation effects. 5) The paper also provides detailed analysis and implication from a new institutional perspective. This study using a novel and appropriate methodology for performing group comparisons would be useful for researchers interested in comparative studies employing institutionalism theory and PLS-SEM multi-group analysis technique.