• International Journal of Oral Biology
• /
• 제49권2호
• /
• pp.48-52
• /
• 2024

This study explores the histological features and Bmp4 expression patterns in the replaced tooth germ of Xenopus laevis. Tooth germ formation starts from the dental placode through epithelial-mesenchymal interactions, involving various signaling pathways such as Fgf, Shh, Bmp, and Wnt. In mice, Bmp4 expression in the dental placode inhibits Pax9 expression in the dental mesenchyme. Although absent in the presumptive dental lamina of birds and toothless mammals, Bmp4 remains conserved in reptiles and fish owing to gene duplication. However, its expression in amphibian tooth germs is poorly understood. Three-month-old X. laevis were employed in this study. Initially, samples underwent paraffin embedding and were sectioned into 5 or 12 ㎛ ribbons for H&E staining and in situ hybridization, respectively. Results revealed teeth appearing in two maxillary rows: the labial side, with prefunctional and functional teeth, and the lingual side, with replaced tooth germs behind functional teeth. Enameloid was observed between the inner dental epithelium and dental mesenchyme at the cap or early bell stages, whereas enamel and dentin formed during the late bell or mineralization stages from the replaced tooth germ. Bmp4 expression was evident in the inner dental epithelium (ameloblasts), dental papilla (odontoblasts), stellate reticulum, and Hertwig's epithelial root sheath. Overall, these findings highlight the conservation of Bmp4 expression in X. laevis tooth development.

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.69-74
• /
• 2000

Applicability of Thermal field flow fractionation (ThFFF) was investigated for the analysis of masticated natural rubber (NR) adhesives produced bya hot melt mastication process. An optimum ThFFF condition for NR analysis was found by using tetrahydrofuran (THF) as a solvent/carrier and a field-programming. Low flowrate (0.3 mL/min) was used to avoid stopping the flow for the sample relaxation. Measured molecular weight distribution was used to monitor degradation of rubber during the mastication process. Rubber samples collected at three different stages of the mastication process and were analyzed by ThFFF. It was found that in an anaerobic process rubber degradation occurs at the resin-mixing (compounding) zone as well as in the initial break-down zone, while in an aerobic process most of degradation occurs at the initial breakdown zone. It was also found that E-beam radiation on NR causes a slight increase in the NR molecular weight due to the formation of a branched structure.

• 한국표면공학회지
• /
• 제15권1호
• /
• pp.24-38
• /
• 1982

The Objective of this study is to analyze structural and operational aspects of the govern-ment, its associations, industries and academic associations related to metal-plating industry, and thereby recommend ways of promotion of subsector, which is yet to be developed. Stages for the implementation are proposed as follows. 1) Stage One: Preparation for formation of proper atmosphere. ⅰ) Clearance of unlicenced metal-plating factories. ⅱ) Strengthening of functions of the association. ⅲ) Provision of incentives through the tax system. 2) Stage-Two : Modernization and maturity ⅰ) Introduction of system for indicating quality of products. ⅱ) Implementation of joint and cooperative-based programs ⅲ) Technical advancement of the closed system and anti-pollution treatment. 3) Stage Three : Settlement ⅰ) Systematic use of statistics and information. ⅱ) Standardization of quality of the products.

• 대한원격탐사학회지
• /
• 제37권4호
• /
• pp.699-717
• /
• 2021

South Korea is pushing for the advancement of crop production technology to achieve food self-sufficiency and meet the demand for safe food. A medium-sized satellite for agriculture is being launched in 2023 with the aim of collecting and providing information on agriculture, not only in Korea but also in neighboring countries. The satellite is to be equipped with various sensors, though reference data for ground information are lacking. Hyperspectral remote sensing combined with 1st derivative is an efficient tool for the identification of agricultural crops. In our study, we develop a system for hyperspectral analysis of the ground-based reflectance spectrum, which is monitored seven times during the cultivation period of three soybean crops using a PSR-2500 hyperspectral sensor. In the reflection spectrum of soybean canopy, wavelength variations correspond with stages of soybean growths. The spectral reflection characteristics of soybeans can be divided according to growth into the vegetative (V)stage and the reproductive (R)stage. As a result of the first derivative analysis of the spectral reflection characteristics, it is possible to identify the characteristics of each wavelength band. Using our developed monitoring system, we observed that the near-infrared (NIR) variation was largest during the vegetative (V1-V3) stage, followed by a similar variation pattern in the order of red-edge and visible. In the reproductive stage (R1-R8), the effect of the shape and color of the soybean leaf was reflected, and the pattern is different from that in the vegetative (V) stage. At the R1 to R6 stages, the variation in NIR was the largest, and red-edge and green showed similar variation patterns, but red showed little change. In particular, the reflectance characteristics of the R1 stage provides information that could help us distinguish between the three varieties of soybean that were studied. In the R7-R8 stage, close to the harvest period, the red-edge and NIR variation patterns and the visible variation patterns changed. These results are interpreted as a result of the large effects of pigments such as chlorophyll for each of the three soybean varieties, as well as from the formation and color of the leaf and stem. The results obtained in this study provide useful information that helps us to determine the wavelength width and range of the optimal band for monitoring and acquiring vegetation information on crops using satellites and unmanned aerial vehicles (UAVs)

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.790-799
• /
• 2010

The Upper Devonian Grossmont Formation in Alberta, Canada reserves an estimated 50 billion cubic meters of bitumen and possess about 1/6 of the total bitumen resources in northern Alberta. However, unlike the overlying Athabasca oil sands, non conventional bitumen resources has not been developed as yet. The carbonate rocks of Grosmont Formation have been subject to various stages of diagenesis, including dolomatization and karstification with a strong effect on the distribution of porosity and permeability, which resulted in highly heterogeneous reservoirs. An extensive fracture logging and mapping was performed on total of six boreholes located in the study area to explore the characteristics of fracture geometry system and the subsurface structures of carbonates reservoir that holds bitumen. Fractal dimension was used as a measure of the statistical homogeneity of the fractured rock masses. The applicability of random Cantor dust, Dc, as a fractal parameter was examined systematically. The statistical homogeneity of fractured carbonates rock masses was investigated in the study area. The structural domains of the rock masses were delineated depthwise according to estimated Dc. The major fracture orientation was dominated by horizontal beddings having dip of $0-20^{\circ}$. Also, fractures having high dip angles existed with relatively low frequency. Three dimensional fracture network modeling for each structural domain has been performed based on fracture orientation and intensity, and some representative conceptual models for carbonates reservoir in the study area has been proposed. The developed subsurface conceptual models will be used to capture the geomechanical characteristics of the carbonates reservoir.

• 한국식품영양학회지
• /
• 제23권2호
• /
• pp.276-284
• /
• 2010

The effects of different dietary fatty acids on the hepatic glutathione S-transferase(GST-P) positive foci and glutathione related enzyme system were investigated in carcinogen treated rats. Weaning male Sprague Dawley rats were divided into three groups and fed the diets of 15% corn(CO), perilla(PO), and sardine oil(SO), respectively. Hepatocellular carcinogenesis was initiated with diethylnitrosamine(DEN) and then fed the diet containing 0.02% 2-acetylaminofluorene(2-AAF) followed by 0.05% phenobarbital for 10 weeks. The hepatic tissues were homogenized and centrifugated to prepare microsomal and cytosolic fractions. The enzyme activities of hepatic glutathione S-transferase(GST), glutathione reductase(GR), and glutathione peroxidase(GPx) were determined from cytosolic fractions. The number of GST-P hyperplastic nodules was the highest in corn oil group at 6th week, the early stage of hyperplastic nodule formation. GST activities were increased significantly by carcinogens in all dietary groups after 6th wk. GR activities followed the same trend as GST activities. GPx activities were decreased by carcinogens in all dietary groups at 10th week. In this experiment, corn oil diet may have promotive effect on hyperplastic nodule formation during the early promotional stages of chemical carcinogenesis.

• Archives of Plastic Surgery
• /
• 제35권2호
• /
• pp.127-133
• /
• 2008

Purpose: The purpose of this study is to evaluate the remodeling process of the various skin substitutes in 4th and 6th weeks following the transplantation when transplanted onto nude mice. Methods: Three types of artificial skin substitutes, such as PLGA scaffold with keratinocyte sheets(group 1), acellular human dermis($Surederm^{(TM)}$) and keratinocyte sheet(group 2), bioengineered skin($Neoderm^{(TM)}$)(group 3), were applied to the wound on nude mice. All mice were killed in 2, 4 weeks and/or 6 weeks after grafting and tissue samples were harvested from the back of mice. The changes in wound size, degree of angiogenesis, formation of basement membrane and epidermis, density of collagen fibers and neural restoration were examined. Results: There was no significant changes in wound size among the three groups. However, the size of wound decreased in the non-substituted group due to contracture. Degree of angiogenesis and systhesis of collagen or neurofilaments were mostly increased in bioengineered skin($Neoderm^{(TM)}$)(group 3), followed by acellular human dermis($Surederm^{(TM)}$) and keratinocyte sheet(group 2), PLGA scaffold with keratinocyte sheets (group 1). However, group 3 and group 2 showed similar thickness of basement membrane and epidermis. Conclusion: We found that degree of angiogenesis, formation of basement membrane and skin appendages, density of collagen fibers and neurofilaments can be the categories to evaluate the success of artificial skin substitution in early stages.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.893-906
• /
• 2017

Automatic large scale soil model generation is very critical stage for earthquake hazard simulation of urban areas. Manual model development may cause some data losses and may not be effective when there are too many data from different soil observations in a wide area. Geographic information systems (GIS) for storing and analyzing spatial data help scientists to generate better models automatically. Although the original soil observations were limited to soil profile data, the recent developments in mapping technology, interpolation methods, and remote sensing have provided advanced soil model developments. Together with advanced computational technology, it is possible to handle much larger volumes of data. The scientists may solve difficult problems of describing the spatial variation of soil. In this study, an algorithm is proposed for automatic three dimensional soil and velocity model development of southern part of the European side of Istanbul next to Sea of Marmara based on GIS data. In the proposed algorithm, firstly bedrock surface is generated from integration of geological and geophysical measurements. Then, layer surface contacts are integrated with data gathered in vertical borings, and interpolations are interpreted on sections between the borings automatically. Three dimensional underground geology model is prepared using boring data, geologic cross sections and formation base contours drawn in the light of these data. During the preparation of the model, classification studies are made based on formation models. Then, 3D velocity models are developed by using geophysical measurements such as refraction-microtremor, array microtremor and PS logging. The soil and velocity models are integrated and final soil model is obtained. All stages of this algorithm are carried out automatically in the selected urban area. The system directly reads the GIS soil data in the selected part of urban area and 3D soil model is automatically developed for large scale earthquake hazard simulation studies.

• Journal of the korean society of oceanography
• /
• 제39권1호
• /
• pp.26-34
• /
• 2004

The evolution of intricate and striking patterns of suspended sediments (SS), which are created by certain physical dynamics in the East China and Yellow Seas, has been investigated using satellite ocean color imageries and vertical profiles of particle attenuation and backscattering coefficients. The structure of these patterns can reveal a great deal about the process underlying their formation. Sea surface temperature (SST) analyzed from the Advanced Very High Resolution Radiometer (AVHRR) thermal infrared data were used to elucidate the physical factors responsible for the evolution of suspended sediment patterns in the East China Sea. The concomitant patterns of suspended sediments were tracked from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) ocean color data. The detailed examination about these patterns gave birth to the definition of the evolution of suspended sediments (SS) into four stages: (1) Youth or Infant stage, (2) Younger stage, (3) Mature stage, and (4) Old stage. We describe about the three directional forces of the tidal currents, ocean warm currents and estuarine circulations that lead to occurrence of various stages of the evolution of suspended sediments that increase turbidity at high levels through out the water column of the inner and outer shelf areas during September to April. The occurrence of these four stages could be repeatedly observed. In contrast, vertical profiles of the particle attenuation ($c_{p}$) and backscattering ($b_{bp}$) coefficients displayed obvious patterns of the propagation of suspended sediment plume from the southwestern coastal sea that leads to eventual collision with the massive sediment plume originating from the Yangtze banks of the East China Sea.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.133.2-134
• /
• 2003

Cedar-apple rust fungi had been collected at 36 sites throughout the country from 1984 to 2001 and deposited at the Herbarium of Korea Forest Research Institute (HKFRI). We conducted the morphological examination on the dried specimens by light and scanning electron microscopy and as results six Gymnosporangium species were identified. Three species, G. asiaticum, G. clavaritforme and G. yamadae, were previously described in Korea, while the other three species, G. cornutum, G. globosum, and G. japonicum were new to Korea. Here we present the detailed morphological descriptions, distribution, host ranges and keys to species in both aecial and telial stages of each species. Some morphological characteristics related with telial formation on trees were newly identified; witches brooms for G. asiaticum, small galls for G. yamadae and telial formations on trunk for G. japonicun Geographically G. asiaticum and G. yamadae distributed widely throughout Korea, while the others were collected only at the limited locations. Eight Juniperus species as telial hosts and fifteen Rosaceous plants as aecial hosts were confirmed to be new in Korea.