• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.7-13
• /
• 2011

In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

• 한국대기환경학회지
• /
• 제12권4호
• /
• pp.495-504
• /
• 1996

The concentrations of dimethylsulfide (DMS) were determined from both seawater and the overlying atmosphere from a station located in the Masan Bay area during a ten-day field campaign period of January 1996. The resulting data were also used to derive saturation ratios (SR) as well as sea-to-air fluxes of DMS. The concentrations and fluxes of DMS for both reservoirs varied extensively over two to three orders of magnitude: DMS in air and seawater were measured at 9 to 4,300 pptv (mean: 600 $\pm$ 1, 170, N=18) and at 0.24 to 10 nM (4.0 $\pm$ 3.4, N=13), respectively, while its fluxes were found from 0.02 to 23 mol $m^{-2} day^{-1} (3.1 \pm 6.8, N=11)$. A comparative analysis between our data and previously reported ones indicate that its atmospheric concentrations are abnormalously high, but its seawater counterparts are slightly lower than expected. In light of high pollution levels of organic-rich materials in and the associated high biological productivity of the study area, the sea-to-air-fluxes derived are notably low relative to those values typically reported from the coastal areas. These complicated features of DMS distributions/fluxes in the study site indicate that the near-by port- based anthropogenic activities from various industrial plants strongly interfere with natural processes leading to the production and release of DMS. It was however striking to find out relatively strong signals of diel cycle in its saturation ratios, concentration gradients between seawater and atmosphere, and the associated fluxes. Although it is yet difficult to provide meaningful explanations for the observed phenomena, the existence of clear diel cycle in some DMS-related parameters suggests that the natural processes may nonetheless exert important controls on the regional cycling of atmospheric sulfur species, of particular DMS.

• 수산해양교육연구
• /
• 제28권4호
• /
• pp.1159-1170
• /
• 2016

This study examines the distribution and taxonomy of sea horses in South Korea, specifically sea horses that were caught in the Southern Sea, centering on Yeosu, South Korea. Specimen collection methods The samples were collected by set net, skimming nets, dragnets, and landing nets on a boat, as well as scuba diving. A total of 128 sea horses belonging to three species were collected. To investigate the exact distribution pattern, the catch per unit effort and the population density per $1,000m^2$ were calculated for each site in the Southern Sea. The result shows the highest catch by set nets was 29 sea horses a day in Site B at Dolsan-eup, Port Impo, and the highest catch by scuba diving was 8 sea horses a day in Site B at Gijang-gun, Busan. The highest population density was 61.2 sea horses in the coast of Gijang-gun, Busan. Genetic information analysis and morphological analysis were performed for determination of species. As a result, four Hippocampus trimaculatus, (flat-faced sea horses), 45 Hippocampus coronatus (Crowned sea horses), and 79 Hippocampus mohnikei (Japanese sea horses) were distinguished.

• 한국전자파학회논문지
• /
• 제26권12호
• /
• pp.1044-1049
• /
• 2015

본 논문에서는 격리도 향상 공진기(isolating resonator)를 사용하여 격리도를 향상시킨 안테나를 제안하였다. Wi-Fi 주파수(2.4~2.5 GHz) 대역에서 동작하는 두 개의 루프 안테나는 그라운드의 센터를 중심으로 대칭으로 설계되었고, 이격거리가 매우 가깝다. Wi-Fi 주파수 대역에서의 격리도 저하 특성을 개선하기 위해 두 안테나 사이에 격리도 향상 공진기를 삽입하였다. 제안된 격리도 향상 공진기는 슬롯타입 구조로 공진기의 사이즈 조절을 통해 격리도 특성을 향상시키고, 삽입된 커패시터($C_D$)를 통해 공진기의 공진 주파수를 이동시킴으로써 목표 주파수에서의 격리도 특성을 쉽게 향상시킬 수 있다.

• 한국음향학회지
• /
• 제38권6호
• /
• pp.630-636
• /
• 2019

수동측거소나는 잠수함 플랫폼의 좌/우현에 각각 3개의 부배열로 구성된 수동소나의 한 종류로서 표적을 탐지하고 방위와 거리를 산출하는 특성을 갖는다. 방위와 거리 산출에는 물리적인 부배열 위치로 인하여 발생되는 시간지연과 삼각측량 기법이 활용된다. 이러한 기법에는 부배열의 정확한 위치정보가 요구되며 부배열의 위치정보가 부정확할 경우 방위와 거리정확도 성능이 저하되는 한계가 있다. 특히 하나의 시간지연을 사용하는 방위보다 두 개의 시간지연 값을 사용하는 거리 정확도 성능에 미치는 영향이 더 크다. 이를 개선하기 위하여 부배열의 위치 오차 추정 및 오차보상에 대한 연구가 필요하다. 본 논문에서는 최적화 탐색 기법인 유전자 알고리즘을 바탕으로 부배열 위치오차를 추정하며, 위치오차로 인한 시간지연 오차 값을 보상하여 거리정확도 성능 개선 방법을 제시하고자 한다. 또한 해상시험 데이터를 이용하여 제시한 알고리즘과 성능을 검증하고자 한다.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.1-6
• /
• 2011

In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.114-120
• /
• 2008

본 논문에서는 단락 개방 Calibration (SOC) 방법을 이용하여 MIM 구조로 구성된 커패시터의 기생 소자 값들을 추출하였다. Strip line 으로 구성된 short, open, MIM 구조들의 산란 파라미터 행렬들은 전자기 시뮬레이터 및 벡터 네트웍 분석기를 이용하여 측정되었다. 전자기 시뮬레이션들은 3차원 구조 해석에 적합해왔던 유한 유소법 (FEM)을 이용하여 수행되었다. 적층 구조 내부에 형성된 MIM 커패시터의 전자기 영향들은 집중 소자들로 구성된 II 형 등가 회로로 제안되었고, 2 포트 네트웍 해석을 수행함으로써, 측정된 산란 파라미터들과 등가회로 소자들 간의 관계를 보였다. 제안된 SOC 방법을 이용하여 추출된 집중 소자들은 주파수 독립적인 결과를 나타낸다.

• 한국전자파학회논문지
• /
• 제23권8호
• /
• pp.967-975
• /
• 2012

본 논문에서는 샘플링 오실로스코프를 이용한 시간 영역의 해석을 통해 초고주파 소자 및 안테나의 반사 계수를 평가하는 방법을 소개한다. 20 GHz 급의 펄스 입력 신호에 대한 반사 신호를 측정한 후, 이를 푸리에 변환하여 반사 계수를 추출하였다. 초고주파 반사파 회로망의 보정에 필요한 3가지 오차 계수들은 3.5 mm calibration kit을 이용하여 유도하였다. 또한, 반사파 측정을 위하여 결합기를 사용한 경우의 오차 계수를 유도하고, 이를 적용하여 얻은 반사 계수와 벡터 회로망 분석기로 측정한 결과를 비교하였다.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.357-361
• /
• 2011

The terminal current in voltage driven systems is an essential role for characterizing the pattern of electric discharge such as corona, breakdown, etc. Until now, to evaluate this terminal current, Sato's equation has been widely used in areas of high voltage and plasma discharge. Basically Sato's equation was derived by using the energy balance equation and its final form described physical meaning explicitly. To give more general abilities in Sato's equation, we present a generalized approach by directly using the Poynting's theorem incorporating the finite element method. When the magnetic field effect or the time-dependent voltage source is considered, this generalized energy method can be easily applicable to those problems with any dielectric media such as gas, fluid, and solid. As an alternative approach, the integral Ohm's law resulting in small numerical errors has an ability to be applied to multi-port systems. To test the generalized energy method and integral Ohm's law, first, the results from two prosed methods were compared to those from Sato's approach and an analytic solution in parallel plane electrodes. After verification, the generalized method was applied to the tip-sphere electrodes for evaluating the terminal current with three carriers and the Fowler-Nordheim field emission condition. From these results, we concluded that the generalized energy method can be a consistent technique for evaluating the discharge current with various dielectric materials or large magnetic field.

• 한국항해학회지
• /
• 제24권1호
• /
• pp.13-22
• /
• 2000

The collisions at sea among marine casualties are not reduced as the tonnage and speed of ship's increase as well as the traffic quantity increase at sea, in spite of the improvement of nautical equipment, enforcement of crew's education and training as well as improvement of quality standard according to the implementation of ISM code. The measures to prevent the collisions at sea are simple, and are composed of six stage.: The first stage is that the officer on duty detect the target from his eye or radar information. The second stage is determining the type and kind of target-ship. The third stage is target tracking; calculation of target speed, course, CPA and TCPA from radar information or visual check. The fourth stage is determination of vessel in danger after calculation of third stage. The fifth stage is the judgement of situation if own ship is stand-on or give way vessel according to the 1972 COLREG. The last stage is to carry out proper action according to 1972 COLREG, under the circumstances. But by the case, the situations are so different under the different external conditions; for example, natural/navigational conditions, crew's human factors, ship's particular, rule or regulation, management system on board, the condition of watch keeping. Therefore the reasons and casualties are so complicated. This study aims to investigate the collision casualty at sea which needs to clarity all these causal factors of afore-mentioned, and to analyze the causes of problems so as to utilize them to establish the measures of preventing marine accidents. This study, described the concepts of causal factors into three groups; environmental factor, and company/on board management system and navigator's act. Also described how to investigate and analyzes the casual factors. Even though it was described in this paper how to detect the causal factors and reasons of collisions, and how to analyze the inter-relation of each causal factors, it is necessary to do further study how to analyze between the liability of concerned parties and the casual factors involved.