• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.1
• /
• pp.37-42
• /
• 2011

The rheological properties of the aqueous solution of scleroglucan industrially produced by Sclerotium rolfsii at concentrations ranging from 0.1 % to 2 % (w/w) were determined by using brookfield viscometer and rheometer. Gel matrices of scleroglucans were stable over a wide range of pH and ionic strength in the aqueous medium. In the oil dispersion with phytosqualane in oil phase and three kinds of thickening agent in aqueous phase, scleroglucan showed the highest dispersion properties. The synergistic effect between scleroglucan and locust bean gum was also examined. The highest viscosity was obtained for the solution mixture at scleroglucan/locust bean gum weight ratio of 5 : 5. The results of this study suggest the potential of scleroglucan as thickner for a wide variety of cosmetic formulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.134-141
• /
• 1993

Electro-Rheological(ER) fluids undergo a phase-change when subjected to an external electic field, and this phase-change typically manifests itself as a many-order-of-magnitude change in the rheological behavior. This phenomenon permits the global stiffness and energy- dissipation properties of the beam structures to be tuned in order to synthesize the desired vibration characteristics. This paper reports on a proof-of-concept experimental investigation focussed on evaluation the vibration properties of hollow cantilevered beams filled with an ER fluid. and consequently deriving an empirical model for predicting field-dependent vibration characteristics. A hydrous-based ER fluid consisting of corn starch and silicone oil is employed. The beams are considered to be uniform viscoelastic materials and modelled as a viscously-damped harmonic oscillator. Natural frequency, damping ratio and elastic modulus are evaluated with respect to the electric field and compared among three different beams: two types of different volume fraction of ER fluid and one type of different particle concentration of ER fluid by weight. Transient and forced vibration responses are examined in time domain to demonstrate the validity of the proposed empirical model and to evaluate the feasibility of using the ERfluid as an actuator in a closed-loop control system.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.539-547
• /
• 2015

To investigate dimensional responses of wood under dynamic temperature condition, poplar (populous euramericana Cv.) specimens, 20 mm in radial (R) and tangential (T) directions with two thicknesses of 4 and 10 mm along the grain, were exposed to cyclic temperature changes in square wave between $25^{\circ}C$ and $40^{\circ}C$ at 60% relative humidity (RH) for three different cycling periods of 6 h, 12 h and 24 h. R and T dimensional changes measured during the cycling gave the following results: 1) Transverse dimensional changes of the specimens were generally square but at an opposite phase and lagged behind the imposed temperature changes. The phase lag was inversely correlated with cycling period, but positively related to specimen thickness, while the response amplitude was directly proportional to cycling period, but in a negative correlation with specimen thickness. 2) The specimens showed swelling hysteresis behavior. The heat shrinkage coefficient (HSC) became greater as cycling period increased or specimen thickness decreased. 3) Dimensional changes of the specimens produced deformation accumulation during repeated adsorption and desorption. The deformation accumulating ratio decreased with an increase in cycling period and specimen thickness. 4) Wood suffered 1.5 times as many dimensional changes per unit temperature variation as per unit humidity variation, and this deformation behaved even more seriously under static condition.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.42-48
• /
• 1999

Three mixtures of elemental powders of Al-25at.%Ti, 48at.%Ti and 70at.%Ti were offered to ball milling process for the formation of intermetallic compounds of $Al_3Ti$, AlTi and $Ti_3Al$. Ballmilling or attrition process were carried out at the condition of rotaing speed of 110 or 350 rpm at $10^{-3}$ torr vacuum or argon atmospheres. $Al_3Ti$phases were fully obtained by heat treatment for 1 hors at $600^{\circ}C$ with Al-25at.%Ti composition mixtures milled by 100 hours. The amorphous phase was completely formed at the composition of Al-48at.%Ti mixed powders by milling 100hours at the 50 to 1 weight ratio of ball to powder, and AlTi compounds were obtained by heat treament. In the case of Al-70at%Ti mixed powders milled for 100 hours, $Ti_3Al$ and $Al_3Ti$intermetallic compounds were formed by heat treatment for 1 hour at $600^{\circ}C$. By attrition milling of 350rpm for 10 hours, $Ti_3Al$ phase was formed completley after heat treatment for 1 hour at $600^{\circ}C$.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.59-67
• /
• 2006

Evolution of the unsteady three-dimensional tip vortex in the wake field of a rectangular NACA 0012 hydrofoil in pitching motion is investigated. Measurements were made in CWC using PIV. A hydrofoil has an aspect ratio of 5 with chord length of 1 Oem. Pitching angle and mean angle of attack were set to $\pm$ $5^{\circ}$ and $10^{\circ}$, respectively. Frequency of oscillation was varied from 0.1 Hz to 1 Hz in order to study the effect of unsteadiness imposed by various frequencies, which correspond to the reduced frequency of K=0.1, 0.21, 0.52 and 1.05. Reynolds number based on chord length and free-stream velocity was $30\times$$10^{4}$ Phase-averaging technique was employed. Unsteadiness and variation of the size and characteristics of tip vortex at different reduced frequency were discussed.

• Journal of Nutrition and Health
• /
• v.30 no.3
• /
• pp.307-317
• /
• 1997

To determine the effects of endogenous and exogenous strogen on serum lipid levels, twenty nonsmoking healthy Korean women were participated in this experiment for 12 weeks. They were assigned to three groups : (1) eight women aged 22 to 30(yr) for the premenopausal(Pre) group, (2) eight, aged 49 to 60(yr) for the postmenoparusal(Pst) group, (3) four, aged 23 to 30(yr) for the oral contraceptive(OC) group which used triphasic OC formulation. Fasting blood samples representing every phase of the hormonal levels were obtained from the subjects of the Pre and the OC group. From the subjects of the Pst group, fasting blood samples were obtained once per three weeks for 12 weeks. All the serum data were adjusted for dietary effects, exercise, personality type and body mass index(BMI) by using analysis of covariation(ANCOVA). Serum lipid levels of the three groups were significantly different. While serum levels of triglycerides(TG)(p<0.0001), low density lipoprotein-chloesterol(LDL-C)/high density liporotein-cholesterol(HDL-C) ratio (LDC-C/HDL-C)(P<0.01) and total cholesterol (TC)/HDL-C ratio (TC/HDL-C)(P<0.001) were significatnly high in the Pst group, serum HDL-C(P0.001) level was significantly high in the Pre group. The OC group showed significantly low serum TC(P<0.0001) and LDL-C(P<0.0001) levels. There was no signidicant difference in the fluictuation of serum lipid levels during the menstrual cycle of the Pre group. However, in the OC group, serum TG level was significantly increased at phase 2(P<0.05) where exogenous estrogen administration was highest. Even though other serum lipid levels of the OC group were not significantly fluctuated according to the exogenous estrogen administration, there was a trend of increased levels of serum TC, LDL-C, LDL-C/HDL-C and TC/HDL-C and decreased level of HDL-C during the menstruation period. Also, serum TC level was high(P<0.005) and serum TG level was low (P<0.005) at the baseline of the OC group compared with the periods of OC administration. When screening and counseling the female population at risk for coronary heart disease(CHD), the result of this study suggest that in may be desirable to divide the population into several groups according to their personal physiological characteristics, such as age, OC administration, menstrual cycle and menopause, as well as general risk factors for CHD.

• Journal of Food Hygiene and Safety
• /
• v.32 no.2
• /
• pp.89-95
• /
• 2017

A rapid, sensitive analytical method for glucuronolactone in beverages was developed and validated using hydrophilic interaction liquid chromatography coupled to electrospray ionization tandem mass spectrometry (HILIC-ESI-MS/MS). To determine the optimum analytical conditions for glucuronolactone, three different kinds of HILIC columns and two mobile phases with different pH values were examined. An amide-bonded stationary phase with a pH 9 acetonitrile-rich mobile phase was the best condition in terms of column retention, ESI-MS/MS response area, and signal-to-noise ratio. After extraction, glucuronolactone was separated through the HILIC amide column and detected by negative ESI-MS/MS in selected reaction monitoring (SRM) mode. Nine energy drinks sold in Korea were spiked with glucuronolactone at a concentration of 5 ng/mL; the Monster $Energy^{TM}$ sample showed the smallest peak area and its signal-to-noise ratio was used for method validation. Good linearity was obtained in the concentration range from 20 to 1500 ng/mL with a correlation coefficient > 0.998. The developed method had a limit of detection (LOD) of 6 ng/mL and a limit of quantitation (LOQ) of 20 ng/mL. The recovery of this method at concentration of 20, 100, 500, and 1000 ng/mL was 96.3%-99.2% with relative standard deviations (RSD) of 1.6%-14.0%. A reproducibility precision assessment at concentration of 100 and 500 ng/mL was carried out among three laboratories. The recovery of that evaluation was 95.1%-102.3% with RSD of 2.7%-7.0%. An analysis of variance indicated that there was no difference between the recovery results of the three laboratories at the 5% significance level. The validated method is applicable to inspecting beverages adulterated with glucuronolactone in Korea.

• Journal of Sensor Science and Technology
• /
• v.9 no.4
• /
• pp.316-326
• /
• 2000

A new signal processing algorithm for white light interferometry has been proposed and investigated theoretically. The goal of the algorithm is to determine the absolute optical path length of an interferometer with very high precision (<< one optical wavelength). The algorithm features cross-correlation of interferometer fringe scans and hypothesis testing. The hypothesis test looks for a zero order fringe peak candidate about which the cross-correlation is symmetric minimizing the uncertainty of misidentification. The shot noise limited performance of the proposed signal processing algorithm has been analyzed using computer simulations. Simulation results were extrapolated to predict the misidentification rate at Signal to-Shot noise ratio (SNR) higher than 31 dB. Root-mean-square phase error between the computer-generated zero order fringe peak and the estimated zero order fringe peak has been calculated for the changes of three different parameters (SNR, fringe scan sampling rate, coherence length of light source). Results of computer simulations showed the ability of the proposed signal processing algorithm to identify the zero order fringe peak correctly. The proposed signal processing algorithm uses a software approach, which is potentially inexpensive, simple and fast.

• Clean Technology
• /
• v.22 no.4
• /
• pp.250-257
• /
• 2016

As an attempt to replacing petroleum-based chemicals with bio-based ones, synthesis of furfural from biomass-derived xylose attracts much attention in recent days. Conventionally, furfural from xylose has been produced via the utilization of highly corrosive, toxic, and environmentally unfriendly mineral acids such as sulfuric acid or hydrochloric acid. In this study, microwave-assisted biphasic reaction process in the presence of novel bio-based heterogeneous acid catalysts was developed for the eco-benign and effective synthesis of furfural from xylose. The microwave was irradiated for reaction acceleration and a biphasic system consisting of $H_2O$ : MIBK (1 : 2) was designed for continuous extraction of furfural into the organic phase in order to reduce the undesired side products formed by decomposition/condensation/oligomerization in the acidic aqueous phase. Moreover, sulfonated amorphous carbonaceous materials were prepared from wood powder, the most abundant lignocellulosic biomass. The prepared catalysts were characterized by FT-IR, XPS, BET, elemental analysis and they were used as bio-based heterogeneous acid catalysts for the dehydration of xylose into furfural more effectively. For further optimization, the effect of temperature, reaction time, water/organic solvent ratio, and substrate/catalyst ratio on the xylose conversion and furfural yield were investigated and 100% conversion of xylose and 74% yield of furfural was achieved within 5 h at $180^{\circ}C$. The bio-based heterogeneous acid catalysts could be used three times without any significant loss of activity. This greener protocol provides highly selective conversion of xylose to furfural as well as facile isolation of product and bio-based heterogeneous acid catalysts can alternate the environmentally-burdened mineral acids.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.462-470
• /
• 2022

The addition of dietary proteases (PRO) to weaner diets hydrolyzes soybean-based anti-nutritive factors and improves weaned pig's dietary digestibility and growth performance. Therefore, this study explores the effects of PRO in a lower crude protein (CP) level diet than that in a commercial diet on the growth performance, nutrient digestibility, and intestinal morphology of weaned pigs. A total of 90 weaned pigs were randomly assigned to 3 dietary treatments with 6 pigs per pen and 5 replicated pens per treatment using a randomized complete block design (block = body weight [BW]): 1) a commercial weaner diet as a positive control (PC; phase1 CP = 23.71%; phase2 CP: 22.36%), 2) lower CP diet than PC as a negative control (NC; 0.61% less CP than PC), and 3) an NC diet with 0.02% PRO. Pigs fed PC and PRO had higher (p < 0.05) final BW, average daily gain, and/or gain to feed ratio for the first three weeks and the overall experimental period than NC. The PC and PRO groups had greater (p < 0.05) apparent ileal digestibility of dry matter, CP, and energy than the NC group. Moreover, pigs fed PC and PRO increased (p < 0.05) apparent total tract digestibility of CP compared with those fed NC. In addition, the PRO group had a higher number of goblet cells than the PC and NC groups. However, pig fed PC and PRO increased (p < 0.05) villus height and height to crypt depth ratio in the ileum compared with those fed NC. In conclusion, PRO supplementation in a commercial weaner diet with low CP levels improves growth rate and nutrient digestibility by modulating the intestinal morphology of weaned pigs.