• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.965-973
• /
• 2021

The intention of this research is to analyze the effects of lactulose (LAC) supplementation on the growth performance, nutrient digestibility, microbial shedding, and fecal noxious gas emissions on weaning pigs in a 42-day trial. Based on the initial body weight and sex, a total of 255 piglets (21 day old) were randomly allocated into one of three dietary treatments with 15 replications and five pigs (two female and three male) per pen. The dietary treatments were as follows: a corn-soybean meal-based basal diet (CON) supplemented with 0, 1, and 2 g·kg^-1 of LAC. During phase 1, significant (p < 0.05) increases in the average daily feed intake and average daily gain (ADG) were observed, whereas during phase 2 and overall experimental period, significant improvements (p < 0.05) in the body weight, ADG, and gain to feed ratio were observed in pigs fed a graded level of LAC compared to those fed the CON diet. Additionally, dietary LAC supplementation significantly improved (p < 0.05) the nutrient digestibility dry matter, nitrogen, and gross energy in both phase 1 and phase 2. Moreover, the inclusion of LAC supplementation significantly increased (p < 0.05) the fecal Lactobacillus counts and reduced (p > 0.05) the E. coli counts in pigs. Furthermore, LAC supplementation reduced (p > 0.05) fecal ammonia and hydrogen sulfide gas emissions during phase 2. The results here indicate that the addition of lactulose at 1 g·kg^-1 and/or 2 g·kg^-1 would be optimal to improve the performance outcomes of weaning piglets.

• Advances in concrete construction
• /
• v.8 no.1
• /
• pp.21-31
• /
• 2019

The rich recipe of ultra high performance concrete (UHPC) offers the higher mechanical, durability and dense microstructure property. The variable like cement/sand ratio, amount of supplementary cementitious material, water/binder ratio, amount of fiber etc. alters the UHPC hardened properties to any extent. Therefore, to understand the effects of these variables on the performance of UHPC, inevitably a stage-wise development is required. In the present experimental study, the effect of sand/cement ratio, the addition of finer material (fly ash and quartz powder) and, hybrid fiber on the fresh, compressive and microstructural property of UHPC is evaluated. The experiment is conducted in three phases; the first phase evaluates the flow value and strength attainment of ingredients, the second phase evaluates the efficiency of finer materials (fly ash and quartz powder) to develop the UHPC and the third phase evaluate the effect of hybrid fiber on the flow value and strength of ultra high performance hybrid fiber reinforced concrete (UHP-HFRC). It has been seen that the addition of fly ash improves the flow value and compressive strength of UHPC as compared to quartz powder. Further, the usage of hybrid fiber in fly ash contained matrix decreases the flow value and improves the strength of the UHP-HFRC matrix. The dense interface between matrix and fiber and, a higher amount of calcium silicate hydrate (CSH) in fly ash contained UHP-HFRC is revealed by SEM and XRD respectively. The dense interface (bond between the fiber and the UHPC matrix) and the higher CSH formation are the reason for the improvement in the compressive strength of fly ash based UHP-HFRC. The differential thermal analysis (DTA/TGA) shows the similar type of mass loss pattern, however, the amount of mass loss differs in fly ash and quartz powder contained UHP-HFRC.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.1
• /
• pp.38-46
• /
• 2010

This study aims at investigating the effect of the baffle height on the liquid sloshing in the three-dimensional (3D) rectangular tank. In order to simulate the 3D incompressible viscous two-phase flow in the 3D tank with partially filled liquid, the present study has adopted the volume of fluid (VOF) method based on the finite-volume method which has been well verified by comparing with the results of the relevant previous researches. The ratio of the baffle height ($h_B$) to filling level (h) has been changed in the range of $0{\leq}h_B/h{\leq}1.2$ to observe the effect on the impact loads on the side wall and free surface behavior. Generally, as baffle height increases, the impact pressure on the wall decreases and the deformation of free surface becomes weaker. However it seemed that a critical ratio of the baffle height existed to reveal the lowest impact pressure on the wall. Consequently, $h_B/h=0.8$ among $h_B/hs$ considered in the study showed the lowest impact pressure.

• Journal of Internet Computing and Services
• /
• v.16 no.6
• /
• pp.57-67
• /
• 2015

This paper proposes an Fuzzy-based Risk Reasoning Driving Strategy on VANET. Its first reasoning phase consists of a WC_risk reasoning that reasons the risk by using limited road factors such as current weather, density, accident, and construction, a DR_risk reasoning that reasons the risk by combining the driving resistance with the weight value suitable for the environment of highways and national roads, a DS_risk reasoning that judges the collision risk by using the travel direction, speed. and distance of vehicles and pedestrians, and a Total_risk reasoning that computes a final risk by using the three above-mentioned reasoning. Its second speed reduction proposal phase decides the reduction ratio according to the result of Total_risk and the reduction ratio by comparing the regulation speed of road to current vehicle's speed. Its third risk notification phase works in case current driving speed exceeds regulation speed or in case the Total_risk is higher than AV(Average Value). The Risk Notification Phase informs rear vehicles or pedestrians around of a risk according to drivers's response. If drivers use a brake according to the proposed speed reduction, the precedent vehicles transfers Risk Notification Messages to rear vehicles. If they don't use a brake, a current driving vehicle transfers a Risk Message to pedestrians. Therefore, this paper not only prevents collision accident beforehand by reasoning the risk happening to pedestrians and vehicles but also decreases the loss of various resources by reducing traffic jam.

• Journal of Digital Contents Society
• /
• v.11 no.3
• /
• pp.283-290
• /
• 2010

The effectiveness of 3.0T phase array coil images was tested by comparing signal-to-noise ratios for the same coil images relative to 1.5T endorectal coil images. Signal intensities were measured in the three regions of prostate, central and peripheral (right and left) after 40 patients with prostate cancer were imaged during the period between Jan. 2008 and Oct. 2009 with T2 W, T1 W, and DW images obtained respectively using endorectal coil on a 1.5T MR scanner and phase array coil on a 3.0T MR scanner. For quantitative analysis, comparisons of average SNRs for the same ROIs were made between groups scanned with a 1.5T and a 3.0T MR scanner. The signal-to-noise ratios were shown to increase more sharply when using a phase array coil at a 3.0T MR scanner compared to using an endorectal coil at a 1.5T MR scanner.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.11 no.1
• /
• pp.76-80
• /
• 2000

Tongue-tip trill is a sound made by the tongue tip making contract with the alveolar ridge and oscillating rapidly as sound is produced. It is an exercise used by many singers to warm up the voice and used as one of the methods of voice rehabilitation for patients who have the vocal folds scarred postoperatively and also who present with a variety of disorders, particularly hypofunction and presbyphonia. We intended to investigate the mucosal vibration of the true vocal folds on tongue-tip trill by electroglottography and to find e effective methods of tongue-tip trill. One adult male volunteer participated. Spectrography and electroglottography were checked repeatedly 15 times, more than 5 second in each times, at same pitch, in three conditions of phonation : sustained /a/ vowel, anterior trill in which tongue-tip vibrated at anterior portion of alveolar ridge just behind the anterior tooth, and posterior trill in which at palatal crest behind the transverse palatine fold We measured the first and second formant to determine indirectly the position of tongue and calculated speed quotient and the ratio of closing phase to closed phase. Speed quotients of posterior trill were higher than sustained /a/ vowel and anterior trill in 14 times. The ratio of closing phase to dosed phase of posterior trill were lower than the others in 14 times. Mucosa of true vocal folds is vibrated more effectively on posterior trill rather than sustained /a/ vowel and anterior trill. So, when tongue-tip trill is used as a method of voice rehabilitation, we suggest that posterior trill is better in producing effective mucosal vibration

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12C
• /
• pp.1142-1148
• /
• 2007

In this paper, we propose ASLM (Adaptive Selective Mapping; ASLM) scheme based on peak observation for PAPR (Peak-to-Average Power Ratio) reduction of OFDM (Orthogonal Frequency Division Multiplexing) signals. The proposed scheme is composed of three steps: peak scaling, sequence selection, and SLM procedures. In the first step, the peak signal samples in the IFFT (Inverse Fast Fourier Transform) outputs of the original input sequence are scaled down. In the second step, the sub-carrier positions where the power difference between the original input sequence and the FFT output of the scaled signal is large, are identified. Then, the phase sequences having the maximum number of phase-reversed sequence words only for these positions are selected. Finally, the generic SLM procedure is performed by using only the selected phase sequences for the original input sequence. Simulation results show that the proposed scheme significantly reduces the complexity in terms of IFFT and PAPR calculation than the conventional SLM, while maintaining the PAPR reduction performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1290-1298
• /
• 2001

A total of 371 weaned pigs were used in three experiments to evaluate the effects of spray dried plasma (SDP), soybean protein sources, and lactose on growth performance. In Exp. 1, 128 pigs (5.99 kg, $18{\pm}2d$) were used to evaluate the effect of SDP (0 vs 7%), lactose (0 vs 30%), and two soybean protein sources [soybean meal (SBM) and extruded soybean protein concentrate (ESPC)] in phase I (d 0 to 14) diets on pig performance in a $2{\times}2{\times}2$ factorial arrangement. Spray-dried plasma increased phase I ADG (p<0.01) and ADFI (p<0.05) in the SBM diets, but not in the ESPC diets. Lactose improved ADG and gain/feed ratio (G/F) in phase I (p<0.01). In Exp. 2, 144 pigs (5.50 kg, $17{\pm}3d$) were used to evaluate the effect of SDP (0 vs. 3.5%) and three soybean protein sources [SBM, ESPC, and soybean protein concentrate (SPC)] in phase I diets, and the effects of two different phase II (d 14 to 28) diets (simple vs complex) in a $2{\times}3{\times}2$ factorial arrangement of treatments. In phase I, SDP increased ADG (p<0.01) and improved G/F (p<0.05). Pigs fed SBM had the highest ADG and ADFI, with a G/F similar to the pigs fed ESPC. In phase II, pigs fed the complex diet had improved ADG (p<0.01), ADFI (p<0.05), and G/F (p<0.05) compared to the simple diet. In Exp. 3, 99 weaned pigs (5.77 kg, $17{\pm}3$d) were used to evaluate the effect of SBM, ESPC, and ESPC with SDP in the phase I diets. Pigs fed SBM with no blood product in the diet had the lowest ADG (p<0.01), ADFI (p<0.01), and G/F (p<0.05) in the first week of phase I. There were no differences in soybean protein sources fed in phase I diets on overall pig performance. These experiments are indicated that SDP and lactose improve the phase I performance. Soybean meal can be used as the major protein source in phase I diets with SDP.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.3
• /
• pp.151-158
• /
• 2018

Objective: In this study, we analyzed kinematic changes in the start phase of speed skating before and after physical training. Method: We introduced a new strength training program (2017) that was improved in terms of exercise type and intensity [%, one repetition maximum (1RM)] compared with the previous strength training program (2016). The new program was applied to elite speed skating athletes (four males and four females). To determine the improvement in starting technique, we recorded race images during the start phase of the 500-m race held in 2016 and 2017. The race images were collected using five high-speed cameras and kinematic characteristics of the start phase were analyzed by three-dimensional image analysis. Results: The 1RMs were improved by 11% on an average after the strength training. In 2017, records of four out of the eight athletes were shortened in terms of the initial lap time (100 m), and 500-m records were shortened in six athletes. The time to nine strokes was shortened in five athletes, and the ratio of correct kinetic chain was increased or maintained at a high level in six athletes. Conclusion: In this study, the new strength training program (2017), applied to elite speed skating athletes, showed a positive effect on starting technique and reduced the record times.

• Transactions of Materials Processing
• /
• v.11 no.5
• /
• pp.447-456
• /
• 2002

A study has been made to investigate the boundary sliding and its accommodation mode with respect to the variation of $\alpha$$_2$/$eta$ volume fraction during superplastic deformation of two-phase Ti$_3$Al-xNb intermetallics. Step strain rate and load relaxation tests have been performed at 950, 970 and 99$0^{\circ}C$ to obtain the flow stress curves and to analyze the deformation characteristics by the theory of inelastic deformation. The results show that the grain matrix deformation and boundary sliding of the three intermetallics containing 21, 50 and 77% in $eta$ volume fractions are well described by the plastic deformation and viscous flow equations. Due to the equal accommodation of both $a^2$ and $\beta$ phases, the accommodation modes for fine-grained materials are in good agreement with the iso-strain rate models. The sliding resistance analyzed for the different boundaries is the lowest in the $\alpha$$_2$/$\alpha$$_2$ boundary, and increases in the order of $\alpha$$_2$/$\alpha$$_2$<< $\alpha$$_2$/$\beta$ = $\beta$/$\beta$, which plays an important role in controlling the superplasticity of the alloys with the various $\alpha$$_2$/$\beta$ phase ratio.