• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.1
• /
• pp.20-27
• /
• 2003

In this study, we designed and made Ultrasonic motor-digital multi controller(USM-DMC) using FPGA chip, A54SX72A made in Actel Corporation. By the minute, USM-DMC can adjust the frequency, duty ratio, and phase difference parameters of USM by digital input to be each 11bit from PC. Therefore, when we use this controller, it is possible to apply typical three parameters individually as well as multi-parameters simultaneously to control the speed and the torque. What is more, the strongest point is that it can trace frequency based on optimized frequency as compared with the phase difference because we can input optimized resonant frequency while in motoring. And we test the speed of USM with the adjustment of multi-parameters, the phase difference-frequency. As the result of the test, in the case of the multi-parameters of the phase difference and frequency, the speed characteristic is more linear and stable, and wider in the range of control than the single-parameter of the phase difference or the frequency.

• Journal of Acupuncture Research
• /
• v.26 no.6
• /
• pp.91-100
• /
• 2009

Objectives : The objective of this study is to investigate Anti-nociceptive and anti-inflammatory effects of Clematidis Radix (CR) herbal-acupuncture on the test rats with induced acute pain. Methods : The effects of Clematidis Radix (CR)-distillates were investigated in three types of models with three different pain. Highly purified distillate of CR called CR herbal-acupuncture was injected to Zusanli ($ST_{36}$) acupoint. In the tail flick test, the CR herbal-acupuncture treatment did not show a significant effect of relieving acute pain. To investigate the anti-inflammatory effect of CR herbal-acupuncture, the second testing model'pain was induced by injecting formalin to its planter. For the last model, carrageenan was injected into tarsal joint. the medicinal effect of CR herbal-acupuncture was evaluated through the behavioral analyses such as licking time, weight distribution ratio and ankle circumference. Results : In the formalin test, the analgesic effect of CR herbal-acupuncture was more pronounced in the late phase (for 20 min after the early phase) than in the early phase (for the first 10 min post formalin injection). It was proven by weight distribution ratio testing and ankle edema testing that herbal-acupuncture of CR inhibited arthritis caused by the carrageenan. Conclusions : These results revealed that CR herbal-acupuncture was effective to alleviate the inflammatory pain and could be used as an analgesic treatment with an anti-inflammatory effect.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.3
• /
• pp.120-125
• /
• 2002

The switching-mode power converter has been widely used because of its features of high efficiency and small weight and size. These features are brought by the ON-OFF operation of semiconductor switching devices. However, this switching operation causes the surge and EMI(Electromagnetic Interference) which deteriorate the reliability of the converter themselves and entire electronic systems. This problem on the surge and noise is one of the most serious difficulties in AC-to-DC converter. In the switching-mode power converter, the output voltage is generally controlled by varying the duty ratio of main switch. When a converter operates in steady state, duty ratio of the converter is kept constant. So the power of switching noise is concentrated in specific frequencies. Generally, to reduce the EMI and improve the immunity of converter system, the switching frequency of converter needs to be properly modulated during a rectified line period instead of being kept constant. Random Pulse Width Modulation (RPWM) is performed by adding a random perturbation to switching instant while output-voltage regulation of converter is performed. RPWM method for reducing conducted EMI in single switch three phase discontinuous conduction mode boost converter is presented. The more white noise is injected, the more conducted EMI is reduced. But output-voltage is not sufficiently regulated. This is the reason why carrier frequency selection topology is proposed. In the case of carrier frequency selection, output-voltage of steady state and transient state is fully regulated. A RPWM control method was proposed in order to smooth the switching noise spectrum and reduce it's level. Experimental results are verified by converter operating at 300V/1kW with 5%~30% white noise input. Spectrum analysis is performed on the Phase current and the CM noise voltage. The former is measured with Current Probe and the latter is achieved with LISN, which are connected to the spectrum analyzer respectively.

• Journal of the Korean Ceramic Society
• /
• v.42 no.8 s.279
• /
• pp.542-547
• /
• 2005

Keys to the attainment of tailored properties in SiC ceramics are microstructure control and judicious selection of the sintering additives. In this study, three different strategies for controlling microstructure of liquid-phase-sintered SiC ceramics (LPS-SiC) have been suggested: control of the initial $\alpha-SiC$ content in the starting powder, a seeding technique, and a post-sintering heat treatment. The strategies suggested offer substantial flexibility for producing toughened SiC ceramics whereby grain size, grain size distribution, and aspect ratio can be effectively controlled. The present results suggest that the proposed strategies are suitable for the manufacture of toughened SiC ceramics with improved toughness.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.189-195
• /
• 1999

A study on the separation Cu, Ni, and Co was carried out using LIX 84 leachate, chelate extractant. For this test, artificial test solution was prepared by varing concentrations of Cu, Ni, Co, $(NH_4)_2CO_3$ and $(NH_4)_2SO_4$. It found that pH of the solution was very important factor for the separation of nickel from copper. The results showed that nickel was effectively extracted from copper by using LIX 84 at pH 1.0 to 1.2. The volume ration or organic to aqueous phases was 1.0. According to the McCabe-Thiele diagram, the extraction rate of copper was 99 percents at the equal ratio of organic to aqueous phase in three stages.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.99-109
• /
• 1996

Experimental investigations are carried out for the characteristics of bubble rise in the Miniature Two-Phase closed Thermosyphon(MTPCT) with a thin wire insert. The working fluids applied as experimental media are of three kinds: water, methanol, and ethanol. The effects of combination of the inclination with diametric ratio $\alpha$(=d$_{0}$/D$_{I}$) on rising velocity of a large bubble in the thermosyphon are explicitly analyzed. The realm of a movable bubble and the critical value of $\alpha$ are iteratively pursued to interpret the region Figures-of-Break, rooted in the governing physics relations, according to the application of working fluid. Experimental results are compared with those of analysis and critical ranges for $\alpha$ and D$_{I}$ were ascertained from comparisons.isons.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.70-76
• /
• 2013

The present paper proposes a coupled volume-of-fluid (VOF) and level-set (LS) method for simulating incompressible two-phase flows that include surface tension effects. The interface of two fluids and its motion are represented by a VOF method designed using high-resolution differencing schemes. This hybrid method couples the VOF method with an LS distancing algorithm in an explicit way to improve the calculation of the normal and curvature of the interface. It is developed based on a rather simple algorithm to be efficient for various practical applications. The accuracy and convergence properties of the method are verified in a simulation of a single gas bubble rising in a three-dimensional flow with a large density ratio.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.355-364
• /
• 2013

Respect to the input AC voltage and output DC voltage, conventional three-phase PWM rectifier is classified as the voltage type rectifier with boost capability and the current type rectifier voltage with buck capability. Conventional PWM rectifier can not at the same time the boost and buck capability and its bridge is weak in the shoot- through state. These problems can be solved by Z-source PWM rectifier which has all characteristic of voltage and current type PWM rectifier. By shoot-through duty ratio control, the Z-source PWM rectifier can buck and boost at the same time, also, there is no need to consider the dead time. This paper proposes the input AC voltage sensorless control method of a three-phase Z-source PWM rectifier in order to accomplish the unity input power factor and output DC voltage control. The proposed method is estimated the input AC voltage by using input AC current and output DC voltage, hence, the sensor for the input AC voltage detection is no needed. comparison of the estimated and detected input AC voltage, estimated phase angle of the input voltage, the output DC voltage response for reference value, unity power factor, FFT(Fast Fourier Transform) of the estimated voltage and efficiency are verified by PSIM simulation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.10
• /
• pp.1419-1424
• /
• 2001

Previous research in our laboratory has demonstrated the importance of lactose in phase I and II pig starter diets. Two experiments were conducted to evaluate the use of a carbohydrate by-product (food by-products) as a replacement for lactose. In Exp. I, 120 weaned pigs ($14{\pm}2d$ and 5.65kg) were allotted in a randomized complete block design (RCBD) to 10 replications with four pigs per pen. This experiment evaluated three carbohydrate sources (lactose, carbohydrate by-product, and 50-50 blend of the carbohydrate by-product and lactose). The carbohydrate sources were added at 26% in the phase I diets and 15% in the phase II diets. Phase I diets contained 7.5% spray dried plasma protein (SDP). The phase I diets were fed from d 0 to 14 and the phase II diets from d 15 to 28. There were no significant differences between carbohydrate sources on pig performance in phase I. However, during phase II pigs fed the diet with lactose had an improved gain/feed ratio (G/F) (p=0.06) compared to pigs fed the carbohydrate by-product. For the entire 28 d trial ADG, ADFI and G/F were similar for the 50-50 blend and those fed lactose. Total replacement of lactose with the carbohydrate byproduct resulted in a reduced G/F (p=0.09). Exp. 2 used 100 weaned pigs ($17{\pm}2d$ and 4.75kg) with five replications with five pigs per pen. This experiment evaluated four carbohydrate treatments (lactose, carbohydrate by-products, 50-50 blend, and corn). All phase I diets contained 3.5% SDP with the carbohydrate sources included at 15%, and were fed d 0 to 14. The phase II diets contained 7.5% of the carbohydrate sources and were fed d 15 to 27. A common phase III diet was fed d 28 to 42. During all phases pigs fed com tended to have a lower ADG than pigs fed the other carbohydrate sources with the 50-50 blend resulting in the highest ADG. The results of both experiments suggest that this carbohydrate by-product can replace at least 50% of the lactose in phase I and phase II pig starter diets.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.295-306
• /
• 2013

The purpose of this study was to provide high school male shot putters training methods of gliding and delivery motion through comparative analysis of kinematic characteristics. To accomplish this purpose, three dimensional motion analysis was performed for the subjects(PKC, KKH, YDL) who participated in high school male shot putter competition on 92nd (2011), 93rd (2013) National Sports Festival. The subjects were filmed by four Sony HXR-MC2000 video cameras with 60 fields/s. The three-dimensional kinematic data of the glide, conversion and delivery phase were obtained by Kwon3d 3.1 version. The data of the shoulder rotational angles and projection angles were calculated with Matlab R2009a. The following conclusions had been made. With the analysis of the gliding and stance length ratio, the gliding length was shorter at the TG than the SG with short-long technique but the gliding and stance length ratio was 46.8:53.2% respectively. The deviation of the shots trajectory from APSS(Athlete-plus-shot-system) revealed that the PKC showed similar to "n-a-b-c-I" of skilled S-shape type, KKH and YDL showed "n-a-d-f-I'" of unskilled type. Furthermore, they showed smaller radial distance from the central axis of the APSS and the shots were away from the linear trajectory. From this characteristics, The PKC who performed more TG than SG had shorter glide with S-shape of APSS(skilled type) showed the better record than others with technical skill. But KKH and YDL had bigger glide ratio with "n-a-d-f-I'" of unskilled type and improved their records with technical factor. The projection factor had an effect on the record directly. Because PKC maintained more lower glide and transition posture with momentum transfer through COG's rapid horizontal velocity respectively the subject possessed the characteristics of high horizontal and vertical velocity with large turning radius from shot putter to APSS.