• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.381-386
• /
• 2008

전장환경에서 헬기는 헬기생존체계의 다양한 센서를 통하여 수집한 데이터를 기반으로 헬기에 대한 위협을 식별한다. 헬기의 성공적인 임무 수행 및 생존을 위하여 헬기에 대한 위협을 반복적으로 확인할 수 있는 시뮬레이터의 구현은 필수적이다. 본 논문에서는 (1) 헬기의 센서가 수신하는 위협요소를 정의하는 온톨로지 생성기, (2) 전장환경과 유사한 위협을 다양한 분포로 생성하는 위협자료 생성기 및 (3) 다양한 전장 시나리오에서 센서들이 수집한 데이터를 통합하여 위협의 방향과 정도를 사용자에게 실시간으로 보여주는 그래픽 화면표시기를 개발한다. 구현한 헬기의 다중센서 위협 시뮬레이터는 다양한 위협을 생성하는 자동 시나리오 생성기를 이용하여 위협 개체의 탐지 및 분류를 반복적으로 수행한다. 위협 시뮬레이터를 활용한 실험에서 동일한 위협에 대한 통합 정확도를 측정하였다.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.134-137
• /
• 2007

In this paper the heat health alert system, which is operated this year by way of showing an example, is a simulator linked to the Geographic Information System (GIS), and it uses meteorological data that are observed at Automatic Weather Systems (AWSs) in Seoul, Korea. Simulation results show that it is possible to use meteorological data observed by AWSs when the Korea Meteorological Administration (KMA) has issued alerting the public to the threat of heat waves, and to connect meteorological data to spatial data when the KMA offers local forecasts and weather-related information. However, most AWSs that were installed to manage urban disasters do not measure humidity, so general humidity is used in all districts. Therefore, to issue heat wave warnings about different localities on a small scale, we will study how to complement this problem and to examine the accuracy of data observed at AWS in the future.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.499-506
• /
• 2007

전장환경에서 헬기는 헬기생존체계의 다양한 센서를 통하여 수집한 데이터를 기반으로 헬기에 대한 위협을 식별한다. 헬기의 성공적인 임무 수행 및 생존을 위하여 헬기에 대한 위협을 반복적으로 확인할 수 있는 시뮬레이터의 구현은 필수적이다. 본 논문에서는 (1) 헬기의 센서가 수신하는 위협요소를 정의하는 온톨로지 생성기, (2) 전장환경과 유사한 위협을 다양한 분포로 생성하는 위협자료 생성기 및 (3) 다양한 전장 시나리오에서 센서들이 수집한 데이터를 통합하여 위협의 방향과 정도를 사용자에게 실시간으로 보여주는 그래픽 표시기를 개발한다. 구현한 헬기의 다중센서 위협 시뮬레이터를 이용하여 다양한 위협에 대한 탐지 및 분류 정확도를 측정한다.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.2
• /
• pp.73-82
• /
• 2018

In this work, a hardware based cryptographic module for the cyber security of nuclear power plant is developed using a system engineering approach. Nuclear power plants are isolated from the Internet, but as shown in the case of Iran, Man-in-the-middle attacks (MITM) could be a threat to the safety of the nuclear facilities. This FPGA-based module does not have an operating system and it provides protection as a firewall and mitigates the cyber threats. The encryption equipment consists of an encryption module, a decryption module, and interfaces for communication between modules and systems. The Advanced Encryption Standard (AES)-128, which is formally approved as top level by U.S. National Security Agency for cryptographic algorithms, is adopted. The development of the cyber security module is implemented in two main phases: reverse engineering and re-engineering. In the reverse engineering phase, the cyber security plan and system requirements are analyzed, and the AES algorithm is decomposed into functional units. In the re-engineering phase, we model the logical architecture using Vitech CORE9 software and simulate it with the Enhanced Functional Flow Block Diagram (EFFBD), which confirms the performance improvements of the hardware-based cryptographic module as compared to software based cryptography. Following this, the Hardware description language (HDL) code is developed and tested to verify the integrity of the code. Then, the developed code is implemented on the FPGA and connected to the personal computer through Recommended Standard (RS)-232 communication to perform validation of the developed component. For the future work, the developed FPGA based encryption equipment will be verified and validated in its expected operating environment by connecting it to the Advanced power reactor (APR)-1400 simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.555-564
• /
• 2016

This paper proposes a time slot allocation scheme for military patrol environments. This proposal comes from analysis of traffic properties in a military patrol environment. In the near future, robots are expected to explore enemy grounds and measure threat, taking the place of human patrol. In order to control such robots, control messages must be extremely accurate. One mistake from the control center could cause a tragedy. Thus, high reliability must be guaranteed. Another goal is to maintain a continual flow of multimedia data sent from patrol robots. That is, QoS (Quality of Service) must be guaranteed. In order to transmit data while fulfilling both attributes, the per-path based centralized TDMA slot allocation scheme is recommended. The control center allocates slots to robots allowing synchronization among robots. Slot allocation collisions can also be avoided. The proposed scheme was verified through the ns-3 simulator. The scheme showed a higher packet delivery ratio than the algorithm in comparison. It also performed with shorter delay time in the downlink traffic transmission scenario than the algorithm in comparison.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.4
• /
• pp.29-39
• /
• 2017

Various electronic warfare situations drive the need to develop an integrated electronic warfare simulator that can perform electronic warfare modeling and simulation on radar threats. In this paper, we analyze the components of a simulation system to reversely model the radar threats that emit electromagnetic signals based on the parameters of the electronic information, and propose a method to gradually maintain the reverse extrapolation model of RF threats. In the experiment, we will evaluate the effectiveness of the incremental model update and also assess the integration method of reverse extrapolation models. The individual model of RF threats are constructed by using decision tree, naive Bayesian classifier, artificial neural network, and clustering algorithms through Euclidean distance and cosine similarity measurement, respectively. Experimental results show that the accuracy of reverse extrapolation models improves, while the size of the threat sample increases. In addition, we use voting, weighted voting, and the Dempster-Shafer algorithm to integrate the results of the five different models of RF threats. As a result, the final decision of reverse extrapolation through the Dempster-Shafer algorithm shows the best performance in its accuracy.