• 복식
• /
• 제62권8호
• /
• pp.19-27
• /
• 2012

Shinyeojuryeom is a set of bamboo blinds[Juryeom] enclosing the Korean litter for transporting a mortuary tablet of royal family[Shinyeo] in Joseon dynasty. The blinds were made up of twigs laid horizontally which were joined together by vertical threading, then they were lined and backed with silk fabric. A number of historical documents such as Gukjosangryebopyeon(1758), JeongjoGukjangdogameuigwe(1800) and Gukjangdogam- myeongseseo(1905) provide information on material and structure of the litter and blinds. How- ever, detailed dimensions or specific ingredients of some of the materials were not clearly explained. In order to complement these missing or unclear parts, a close examination and scientific analysis of the litter's material was undertaken. The result newly identified materials of the gold tip tassels and pigments used on twigs as well as partly confirmed information on historical records. This new information will help further understanding and future production of a replica.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.424-427
• /
• 2003

We have investigated the microstructural analysis of epitaxial lateral overgrowth (ELO), pendeoepitaxy (PE), and superlattice structures used as technology for the reduction of structural defects like dislocation in nitride semiconductors using transmission electron microscopy. We confirmed that the regrowth process such as ELO and PE is very effective technique on the reduction of threading dislocation (less than $10^6/cm^2$) in the specific area. However, to decrease the defect density in the whole nitride films and the suppress the generation of defect by regrowth, we should find the optimized conditions. Besides, the process using double PE and AlGaN/GaN superlattice structure showed no effect on the defect reduction up to now.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.582-586
• /
• 2005

We have grown GaN layers with in-situ SiN mask by metal organic chemical vapor deposition (MOCVD) and study the physical properties of the GaN layer. We have also investigate the effect of the SiN mask on its optical property. By inserting a SiN mask, (102) the full width at half maximum (FWHM) decreased from 480 arcsec to 409 arcsec and threading dislocation (TD) density decreased from $3.21\times10^9\;cm^{-2}\;to\;9.7\times10^8\;cm^{-2}$. The PL intensity of GaN with SiN mask improved 2 times to that without SiN mask. We have thus shown that the SiN mask improved significantly the physical and optical properties of the GaN layer.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.30-37
• /
• 2005

A drum clutch which is a main part for the automatic transmission of auto-mobiles has been manufactured by glob threading and machining. The tooth shape of the drum clutch manufactured by machining has lower dimensional accuracy than that by pressing and its machining needs the enormous cost at plant investment. Thus, this study was designed to develop cold forging process and to improve the productivity and dimensional accuracy. In this work, variables affecting dimensional accuracy were first determined, then cold forming process design according to each variables was performed by FE simulation. Optimal process was suggested on the basis of analytical results.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.105-106
• /
• 1998

Evaluation of def3ects by etch-ppit formation was studied. A NaOH(30 mol%) etchant was found useful for etch-ppit developpment on ZnSe-based eppilayers grown on (001) gaAs. And a H3ppO4(85 mol%) was used in order to developp etch-ppits on GaN-base eppilayers grown on (0001) Al2O3 After etch-ppit formation on the surfsce. Transmission Electron Microscoppy(TEM) was cppmdicted. By etch-ppit developpment and TEM observation we could determine the defect typpes by etch-ppit configurfations and found origin of etch-ppit in the cse of ZnSe-based materials. Based uppon these results we can do defect identification by etch-ppit test simpply. In the case of GaN-based materials we could evaluate nanoppippe density. however high density of threading dislocations in GaN eppilayers were not revealed by etch-ppit developpment. Based uppon these results we can evaluate the nanoppippe density which difficult to evaluate using TEM beacause of its small size(diameter). And at ppresent status direct matching of etch-ppit density to dislocation density would make severe mistake.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.132-132
• /
• 2011

The sheet resistance (Rs) of undoped GaN films on AlN/c-plane sapphire substrate was investigated in which the AlN films were grown by R. F. magetron sputtering method. The Rs was strongly dependent on the AlN layer thickness and semi-insulating behavior was observed. To clarify the effect of crystalline property on Rs, the crystal structure of the GaN films has been studied using x-ray scattering and transmission electron microscopy. A compressive strain was introduced by the presence of AlN nucleation layer (NL) and was gradually relaxed as increasing AlN NL thickness. This relaxation produced more threading dislocations (TD) of edge-type. Moreover, the surface morphology of the GaN film was changed at thicker AlN layer condition, which was originated by the crossover from planar to island grains of AlN. Thus, rough surface might produce more dislocations. The edge and mixed dislocations propagating from the interface between the GaN film and the AlN buffer layer affected the electric resistance of GaN film.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2012년도 하계학술대회
• /
• pp.44-46
• /
• 2012

Depth map를 구하는 방법 중 많이 사용되어지는 방법으로 stripe 패턴을 이용하는 방법이 존재한다. 이 방법은 Pro-Cam 시스템을 이용하며 프로젝터로 조사한 패턴을 카메라로 촬영하여 원래의 패턴과 촬영된 패턴간의 기하학적인 관계를 구하여 depth map를 구하는 방법이다. 본 논문에서는 이와 같이 구조광을 이용하여 depth map 획득 시스템을 효과적으로 multi-thread를 사용하여 실시간 처리하는 것을 제안한다. 일반적으로 자주 사용되는 multi-threading 기법에는 CPU의 thread를 이용하는 OpenMP와 GPU의 thread를 이용하는 CUDA가 있다. 이 두 가지 기법은 수행하는데 차이점이 존재하기 때문에 상황에 따라 OpenMP가 더 좋은 효율을 보이는 부분이 있고 CUDA가 더 좋은 효율을 보이는 부분이 있다. 때문에 우리는 이 두 가지에 대해서 각 부분의 특성에 맞게 더 좋은 효율을 보이는 multi-thread를 이용하였다. 결과적으로 우리는 $1280{\times}800$의 영상에 대해 25fps 이상의 depth map를 획득하였다.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.292-300
• /
• 1995

According to the number of cold-rolled coils, the amount of roll wear and thermal expansion, and roll gap profile were calculated, by using the actual data from the finishing mill. Also, based on those data, the calculations of the deflection, the flattening, and the contact pressure of vwork rolls and backup rolls were made respectively. Specially, in the calculation of contact pressure, the numerical results were obtained not only during the normal rolling, but also during the abnormal rolling, by modeling mathematically the dynamic impact force which occurs when the head section of the strip is threading through rolls. With those results the growth of the fatigue region and the fatigue damage of rolls were predicted. Also the optimum roll-grinding depth was determined to maximize the roll life.

• 제어로봇시스템학회논문지
• /
• 제16권1호
• /
• pp.90-95
• /
• 2010

This paper describes the development of integrated head and eye tracker system. Vision based head tracker is performed and it has 7mm error in 300mm translation. The epi-polar method and point matching are used for determining a position of head and rotational degree. High brightness LEDs are installed on helmet and the installed pattern is very important to match the points of stereo system. Eye tracker also uses LED for constant illumination. A Position of gazed object(3m distance) is determined by pupil tracking and eye tracker has 1~5 pixel error. Integration of result data of each tracking system is important. RS-232C communication is applied to integrated system and triggering signal is used for synchronization.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제46차 하계학술발표논문집 20권2호
• /
• pp.297-300
• /
• 2012

현재 cache의 성능 향상을 위한 많은 기법들이 제안되고 있으며, Latency Hiding 기법 역시 cache의 효율적인 사용을 위해 많은 연구가 진행 되어 왔다. write buffer를 사용한 write Latency hiding기법이나 multi threading을 사용한 Latency Hiding 방법 등 여러 기법들이 연구되어 왔으며, 지금도 Latency hiding을 위한 많은 연구들이 지속적으로 진행되고 있다. 본 논문 역시 효율적인 Latency Hiding을 위한 누적 버퍼를 제안한다. 본 논문은 누적 버퍼의 활용도를 조사하여 얼마나 효율적으로 Latency를 은폐했는지, 또 버퍼를 사용함으로써 얻는 다른 이점에 대해 집중적으로 연구하였다.