• 한국정밀공학회지
• /
• 제27권5호
• /
• pp.63-68
• /
• 2010

The use of aluminum alloy parts in the automotive industry has been increasing recently due to its low weight compared with steel to improve fuel efficiency. Companies in the auto parts' manufacturing sector are expected to meet the government's strict environmental regulations. In this study, manufacturing process of aluminum alloy bolt has been designed from forming to heat treatment. Bolt forming process is composed of cold forging for body and rolling for thread. In this study only cold forging process is considered by employing the finite element method. In the cold forging process, preform shape was designed and damage value was considered for die design. Two steps of forging process has been developed by the simulation and a prototype was manugactured accordingly. As a final process, solution heat treatment and aging process was employed. A final prototype was found to meet the required specifications of tensile strength and dimension.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.353-361
• /
• 1989

본 논문에서는 유한 요소법을 이용하여 접촉을 고려한 나사 체결 문제를 해석하고 여러 다른 체결조건이 각 나사산에 걸리는 하중 분담율에 미치는 영향을 살펴보고, 이 하중 분담율이 보다 균일화 될 수 있는 체결 조건을 찾고, 또 그때의 응력 분포를 살펴보는 것을 목적으로 한다.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.25-28
• /
• 2017

Semiconductor equipment manufacturers desire to enhance efficiency of Sub Fab to increase semiconductor productivity. For this reason, Sub Fab equipment manufacturers are developing Integrated System that combined modules with multiple facilities. Integrated System is required to apply Mount Leveler of Wedge Type in compliance with weight increase compared with existing single equipment and product shape change. This thesis analyzes main design variables of components of Wedge Mount Leveler and carries out structure analysis using ANSYS, finite element analysis program Analysis shows that main design variables of components of Wedge Mount Leveler has self-locking condition by friction force of Wedge and adjusting bolt. Each friction force hinges upon Wedge angle and Friction Coefficient of contact surface and upon the thread angle and Friction Coefficient of contact surface. Also, as a result of carrying out structure analysis of Wedge Mount Leveler, deflection and stress appears in different depending on the height of the level.

• 대한치과교정학회지
• /
• 제41권4호
• /
• pp.280-287
• /
• 2011

Objective: This study compared the stability of cylindrical miniscrews (Cy, 7 mm in length) with that of tapered miniscrews (Ta, 5 mm in length), using torque values to determine if the healing time before loading affects the stability of the miniscrew and if the insertion torque is associated with the removal torque measured after a few weeks of healing. Methods: Ta and Cy with different thread lengths were placed in the tibias of 12 female New Zealand white rabbits (body weight: 3.0 - 3.5 kg), and the maximum insertion torque values (ITV) were measured. No orthodontic forces were applied so as to allow us to determine the pure effects of the different shapes. After 3 different healing periods (2, 4, and 6 weeks), maximum removal torque values (RTV) were measured immediately before the rabbits were sacrificed. Results: No miniscrews were loosened. There were no significant differences in ITV or RTV between the Ta and Cy nor were there any significant differences in the ITV and RTV between the 3 groups, which had different healing periods. There was a correlation between the ITV and RTV. Conclusions: Shorter Ta showed similar stability as Cy, as determined by torque values. This result strongly suggests that the tapered shape is more advantageous than the cylindrical shape. The RTV did not increase significantly over time. It is recommended that a miniscrew be loaded immediately; waiting a few weeks before loading should be avoided. The correlation between the ITV and RTV suggests that the ITV can be used to estimate a screw's future stability.

• 한국패류학회지
• /
• 제23권2호
• /
• pp.181-187
• /
• 2007

A scanning electron microscopic study on the glochidium and glochidial encystment of Anodonta arcaeformis on the host fish Carassius auratus was conducted. The shape of the glochidium was apparently subtriangular and its average size was $270\;{\mu}m\;\times\;260\;{\mu}m\;\times\;145\;{\mu}m$. The glochidial shell valves were of the same size, kept together by a ligament that is 50.4 ${\mu}m$ in length and 5.5 ${\mu}m$ in width. Each of the glochidial shell valve had a long hook studded with many spines on the superior face. A large area of at the apex of the valve surrounding the base of the hook was provided with numerous small spines which became progressively smaller toward the periphery of the area. The glochidial shell valve consisted of two layers. The mantle cells line the glochidial shell valves and some of hair cells were observed. A larval thread was 2.3 ${\mu}m$ in diameter. In the artificial infection of the glochidia to one of the natural hosts, Carassius auratus, it took about three to four hours to encyst the glochidia with epithelial cells of the fish fins. The encystment method was the cell migration from the neighboring epithelial cells.

• Parasites, Hosts and Diseases
• /
• 제22권1호
• /
• pp.30-36
• /
• 1984

An ultrastructural study on the mature spermatoBoa oi Cloptorchis sineitsis was carried out. For this study, the liver cukes were collected from the livers of rabbits and rats artificially infected with the metacercariae obtained from the fresh water fish, Pseudorasbora parve. Six-month old worms were used. The collected liver fiukes were washed with 0.85% saline solution and then immediately moved to cold 2% glutaraldehyde buffered with 0.1M Millonig's phosphate buffier (pH 7.4) . The materials were dissected into appropriate pieces in the fixative about 30 minutes after beginning of the fixation. Two hours later the materials containing the seminal receptacle were rinsed several times with the buffier and were secondarily fixed with cold, bugeyed 1% osmium tetroxide(OsO4) for 2 hours. The fully mixed tissue blocks Ivere dehydrated in a series of graded concentrations of acetone and were embedded in Epon 812 mixture. Thin sections obtained from LKB-5 ultramicrotome were stained with uranyl acetate and Reynold's lead citrate. Observations of the sections were carried out with JEM-100CX II electron microscope, In general, the mature sperm was long thread-like form with a sickle-shaped head. According to the longitudinal sectioned view of the sperm tail, the nucleus seemed to be spirally coiled and run a little far along the tail. The acrosome was not observed. The cytoplasm of the tail was biflagellated as usual in trematodes. Unlike other platyhelminth spermatozoa, the sperm tail of Clenorchis sinensis showed the ${\ulcorner}9+2{\lrcorner}$ in the microtubular arrangement. The mitochondria with poorly developed cristae were observed throughout the middle piece. The middle piece of the tail showed dull ladder or triangular shapes with the two flagella at the bottom. But, the principal piece of the tail was slightly flattened cylindrical shape with two aagella within the cytoplasm. The end piece was uniflagellated. It was not clearly identised whether the end piece was subdivided into two by aagellum or the lengths of the two aagella were different. The glycogen granules were rich in the cytoplasm throughout the lenght of the spermatozoa. These granules might be the energy source for the movement of the spermatosoa.

• 한국추진공학회지
• /
• 제20권5호
• /
• pp.31-39
• /
• 2016

본 논문은 볼트 체결 강성이 추력 시험대에 미치는 영향을 연구한 것이다. 추력 시험대는 추진기관의 추력 성능을 평가하는 장비로 추력, 피치력, 요력(3 분력) 작용선에 대응하는 3 분력 계측선간의 평행도와 3 분력 계측선의 상호 직각도가 다분력 추력시험대의 성능을 좌우한다. 따라서 시험대의 초기 형상을 작동 상태에서 유지시키는 것이 추력 시험대의 핵심 기능이다. 본 논문에서는 추력 시험대의 볼트 체결과 로드셀 트레인의 나사 체결의 공차 정확도가 추력 시험대에 미치는 현상을 규명하고 이를 극복하는 방안을 제시하였다.

• 대한토목학회논문집
• /
• 제6권1호
• /
• pp.87-94
• /
• 1986

일반적으로 자연하천은 수심에 비해 하폭이 크고 완만한 곡률을 나타내므로 2차원 수치모형이 실용적인 것으로 알려져 있다. 본 연구에서는 만곡수로의 흐름특성을 분석하기 위하여 2차원 부정류의 운동방정식과 연속방정식을 차분화하고 Double Sweep 알고리즘에 의한 수치해석모형을 개발하였다. 본 모형의 적용성을 입증하기 위해 L.F.M 실험수로 및 I.I.H.R 실험수로의 실측치와 비교하여 비교적 잘 일치함을 확인할 수 있었다. 벽면마찰의 영향을 감소시키기 위하여 Chezy 계수의 적절한 조정으로 실측치에 더욱 접근된 결과치를 얻을 수 있었으며, 이류항의 영향을 분석하였다. 만곡수로내의 수면형태, 최대유속선이 이동경로 및 깊이방향 평균유속의 크기와 방향을 계산할 수 있었다.

• 한국기계가공학회지
• /
• 제15권5호
• /
• pp.131-136
• /
• 2016

Currently, an EDM tapping procedure has comprised some parts of the engraving discharge process for the press die. Usually, tapping has been used in cases where we are unable to mechanically machine using steelwork processes due to an increase in the hardness of a material after heat treatment in relation to a design change or missing process. Here, we analyze the influence of discharge tap shape on discharge time, discharge current, and the number of repetition conditions when a cold-work tool steel (STD11) has been treated with a discharge tapped by a screw-shaped cu electrode. The most important influence on processing condition has been determined to be the number of discharge repetitions. As this number increases, the angle reduction of a thread closes to an angle of the electrode via a power generation reduction. The optimal combination of conditions has been determined to be three discharge repetitions, $180{\mu}s$ of discharge time (same as existing regulations), and 25.4A of peak current. A 0.2749db advantage has emerged after comparing between this combination of optimal conditions and the SN rate of existing regulations.

• 복식문화연구
• /
• 제26권5호
• /
• pp.700-713
• /
• 2018

The purpose of this study is to analyze the characteristics and symbolism of peony, the traditional noble flower, create knit fashion designer applying the aesthetic beauty of flower, and suggest the various possibility of developing knit fashion design. As for the study method, the study conducted review on literature and previous studies to investigate on history, characteristics, symbolism of peony, and examined various expressive technique through previous studies about fashion design using flower images. To express characteristics of peony in three dimensions, the study investigated and reflected on crochet expressive technique to design 4 women's knitwear. The results are as below. First, as shape of peony is big, voluminous, fancy and noble, it symbolizes wealth and beauty. Including red which is the generally known color of peony, there are yellow, white, pink, purple, green, blue, black, gray, white purple, white color. This study reflected characteristics and symbolism of peony and created knit fashion design applying abundant aesthetic characteristics of flower. Second, crochet method is advantageous as it is operable with thread and hooked crochet hook without time and space restriction, it can create unique fashion design. Crochet knitting on hand knit can diversity changes to express relief textures, and as there is no limit in size, it can be applied to small props to big pieces. This study suggested the various possibility of knit fashion design development and various expressive possibility on modern fashion design.