• 보존과학연구
• /
• 통권19호
• /
• pp.61-74
• /
• 1998

Conservation Treatment Process 1. Inlaying is observed at the back and head of a sword to grasp the inner structure of relics by photographing X-ray. 2. After removing rust of surface, inlaying emerge. 3. After hardening, inlaying emerge to magnetite layer by standing Scapel and Vibrotool throught microscope. Charcterization 1. Most of domestic inlaying become designed to the head of a sword but this inlaying become designed to gold inlaying to the back of a sword. 2. Inlaying is the technique to groove V-shape on the surface of relice and to put gold thread in.

• Archives of Plastic Surgery
• /
• 제50권2호
• /
• pp.142-147
• /
• 2023

Some of Asian eyelids have double fold and some do not. Many people tend to prefer double eyelid in aesthetic and functional reasons. Since the mechanism of double eyelid is bonding the eyelid skin to the eye-opening tissue, the principle of double eyelid surgery is also connecting the eyelid skin to levator component. Double eyelids are differentiated by their shape according to the height and curvature. The double eyelid surgery procedure is divided into incision method and nonincision method. And the incision method is subdivided into double fold line design, skin and oculi muscle incision or excision, pretarsal or preaponeurotic soft tissue excision, fixation of posterior lamella to anterior lamella, and skin suture. The nonincision method is to connect the posterior lamella and the anterior lamella as a thread only without an incision. A successful double eyelid surgery creates a fold well-balanced in height, curvature, and depth of the fold based on patient's preference. In this article, the author's own methods of performing surgery are described, with a step-by-step guide and surgical tips.

• Animal Systematics, Evolution and Diversity
• /
• 제28권3호
• /
• pp.168-177
• /
• 2012

Two stichotrichid ciliates, collected from marine waters in Jeju Island, were identified as Afroamphisiella multinucleata Foissner et al., 2002 and Pseudokahliella marina (Foissner et al., 1982) Berger et al., 1985. They are recorded for the first time in Korea. The descriptions are based on examinations of living as well as protargol-impregnated specimens. These species are characterized as follows. Afroamphisiella multinucleata has a body size in vivo of $70-95{\times}20-35{\mu}m$; elongate rectangular in shape; contractile vacuole located slightly above mid-body. The adoral zone is bipartited into 3 distal and 13-17 proximal membranelles and occupies 28-35% of the body length. The frontal row comprises 1-4 cirri and one buccal cirrus. The amphisiellid median cirral row is composed of 14-21 cirri, 10-19 left marginal cirri, and 21-30 right marginal cirri. Cortical granules are yellowish. 11-20 globular/ellipsoidal macronuclear nodules arrange proximally along the cell margins. Pseudokahliella marina has a body size in vivo of $110-195{\times}40-110{\mu}m$ and broadly elliptical in shape. The adoral zone of the membranelles occupies 50-60% of the body length, and is composed of 41-70 membranelles. A prominent frontal scutum is present. The contractile vacuole is located below the mid-body. There are 11-13 frontoventral rows, including marginal rows. Caudal cirri and transverse cirri are absent. Three invariable non-fragmented bipolar dorsal kineties are present. The left and right marginal rows are composed of 22-35 and 28-40 cirri, respectively. Colourless cortical granules are present. 8-11 spherical/ellipsoidal macronuclear nodules are connected with each other by thread-like tructures, forming an inverted C-shape.

• 대한치과교정학회지
• /
• 제36권1호
• /
• pp.55-62
• /
• 2006

교정용 미니임플랜트는 작은 크기로 삽입 부위에 제한이 적어 고정원 조절에 널리 이용되고 있다. 그러나 잦은 탈락의 단점이 있어 초기 안정성을 향상시키기 위한 다양한 형태와 길이에 관한 연구가 시도되어왔다. 이 연구의 목적은 교정용 미니임플랜트의 형태와 길이에 따른 초기 안정성에 대한 기계역학적 성질을 비교 분석하는 것이다. 미니임플랜트의 직경은 1.6 mm였으며, 형태는 원통형과 원추형, 길이는 6 mm와 8 mm로 구성되어 원통형 6 mm, 원통형 8 mm, 원추형 6 mm, 원추형 8 mm군과, 중앙 1/2에서부터 상방으로 나사산이 점차적으로 작아지는 변형된 원추형 8 mm군을 포함하여 총 5군으로 구성되었다. 각 군은 10개의 미니임플랜트로 구성되었고, 균일한 밀도의 polyurethane foam에 삽입 후 제거하였다. 시간에 따른 삽입 및 제거 토크의 변화와 각각의 최대 토크 등을 측정하여 기계역학적 성질을 비교 분석하였다. 동일한 길이에서 원추형은 삽입과 제거 시 원통형보다 유의성 있게 더 큰 토크를 보여주었다 (p<0.001). 동일한 형태에서 삽입과 제거 시 긴 미니임플랜트가 짧은 미니임플랜트보다 유의성 있게 더 큰 토크를 보여주었다 (p<0.001). 원추형 6 mm는 원통형 8 mm에 비해 삽입 시 유의성 있게 낮은 토크를(p<0.001) 보여주었지만, 제거 시 비슷한 토크를 보여주었다. 변형된 원추형 8 mm에서는 최대 제거 토크 후 지속적으로 높은 제거 토크를 보여주었다. 미니임플랜트의 초기 안정성은 원추형에 의해 향상될 수 있으며, 상부 나사산의 작은 크기와 형태는 미니임플랜트의 초기 안정성에 긍정적인 영향을 미치는 것으로 보인다.$76^{\circ}$였다. Naso frontal angle (G-N'-Pn)은 남자 $142^{\circ}$, 여자 $147^{\circ}$, transverse nasal prominence (Zy(Rt)-Pn-Zy(Lt))는 남자 $112^{\circ}$, 여자 $116^{\circ}$로 남녀 간에 통계학적으로 유의차가 있었다 (p<0.05). 하안면고경 하방 2/3 (Li-Me')와 하악체길이(Go'-Me'), 입술고경(ULPm-Li)과 폭경(Ch(Rt)-Ch(Lt))의 비율은 각각 2/5로 나타났다. 관상기준평면에서 안면의 윤곽을 나타내는 계측점인 FT, Zy, Pn, ULPm, Li, Me'까지의 거리의 비는 -1/-1/1/0.5/0.5/-0.6였다. 또한 얻어진 자료를 이용하여 한국 성인 정상교합자의 3차원 안면 모델을 제작하였으며 이는 교정진단 또는 치료결과 비교 시 template로 활용될 수 있으리라 사료된다.이상의 결과로 극체 방출란만을 선별하여 $12{\sim}36$시간 사이에 분할하는 난자들만을 선별하여 배양한다면 배발생능을 가진 난자들의 비율을 높일 수 있을 것으로 사료된다. 균주(菌株)의 형태학적(形態學的) 배양학적(培養學的) 특성(特性)을 조사(調査)한 결과(結果) Candida guilliermondii var. guilliermondii 로 동정(同定)되었다. 6. CHS-13 균주(菌株)를 당화액(糖化液)에 배양(培養)시켰을 때 Lowry-protein 함량은 $0.72\;mg/m{\ell}$ 이었으며 ,

• 전기학회논문지
• /
• 제62권6호
• /
• pp.803-810
• /
• 2013

The purpose of this research is to analyze the effect of shape of the inductive textile electrode on the non-contact heart activity sensing, based on the magnetic-induced conductivity principle. Four types of the inductive textile electrodes were determined according to the combinations of the two shape features. A fiber-metal hybrid-typed conductive thread was developed and applied to materialization of the textile electrodes by embroidery method. The heart activity was extracted through the textile electrode sewn on a T-shirt. The experiments were implemented to constantly measure the heart activity for 20 seconds, in each case of 5 healthy male subjects. The heart activity signals acquired in each type of the inductive textile electrode were analyzed, 1)by drawing a comparison of morphology with those of ECG signal (LeadII), and 2)by calculation of the normalized mean and standard deviation of magnitude of the heart activity signals. The analysis resulted that the relatively better quality of signals were acquired in the 'square' types in the matter of whole shape, while the better results were obtained in 'donut' types in the matter of center hole. Accordingly, the relatively best quality of signals was obtained in the case of 'Square-Donut' type of the inductive textile electrode.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2197-2202
• /
• 2011

본 논문에서는 중공을 가지는 짧은 치과용 임플란트의 생체역학적인 특성을 3차원 유한요소해석을 통하여 분석하였다. 고려된 치과용 짧은 임플란트는 골유착성을 향상시키기 위해 트리패닝 드링 등에 의해 남겨진 치골과 결합될 수 있는 중공부를 가진다. 연구를 위해 Bicon사의 길이가 짧은 임플란트를 기본 모델로 삼아 중공부가 임플란트 주변 치골의 응력분포에 주는 영향을 분석하였다. 중공부 길이, 직경 및 나사산 등의 형상변수에 따른 반복적인 유한 요소해석을 효과적으로 수행하기 위하여 ANSYS APDL을 이용하여 매개변수화된 유한요소모델을 구성하였다. 해석결과 중공부를 가지는 경우 특히 경사하중 하에서 해면골에서 발생하는 최대응력값이 크게 감소하였으며, 중공부의 형태가 해면골에서의 응력분포에 큰 영향을 주는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제39권4호
• /
• pp.375-382
• /
• 2015

이음새 없는 용기의 돔(Dome) 및 넥크(Neck) 부분 성형을 위해 일반적으로 열간 스피닝 공정이 이용되나, 대부분 현장 작업자들의 경험이나 시행착오에 의해 제작되고 있다. 이로 인하여 열간 스피닝 공정 시, 용기 넥크 부위의 저부부터 상부까지 내경이 동일한 성형을 요구하지만, 고속회전하는 롤러의 이동에 의하여 재료가 성형되는 스피닝 공정의 특성상, 돔 부분의 끝단부인 넥크 부위에서 내경이 벌어지는 형상오차의 문제가 발생한다. 이에 본 연구에서는 스피닝 가공 후, 탭핑 공정을 위하여 이종재료(Cr-13)가 보충된 나사산 모델에 대하여 이론적 해석 및 유한 요소 해석을 수행한 후, 해석결과를 토대로 작동환경하에서 용기의 구조안전성을 검증하였다.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.672-678
• /
• 2011

This was written based on the type and structure of korean man's waist belt in the early and middle era of the Chosun era. The waist belt was excavated from the Mokdaldong in the Daejeon city. The types of korean man's waist belt in the Chosun era were classified into Wondahae (i.e., round shape belt) and Gwangdahae. The Wondahae consist of two types which are circle shaped and straight types. The circle shaped wondahae contain one fringe in the main body of the belt and its joint part is decorated with a small network such as lacing decoration with the size about 1 cm around. The shape of the Wondahae has been changed from the circle shaped into the straight types and also has a tendency to be wider and longer as time went by. The standard form of the Gwangdahae is straight with about 2-3 cm width and elaborated by lacelike fringe as well. This also has a tendency to be wider starting from the 1600s show. The structure of this belts were divided into braid and ornament parts. The ornament part was constructed with the lacelike netting and fringe parts. The sophisticated craft techniques have a great decorative beauty. Through an analysis of FT-IR, the materials of those three belt are known which are made of the silk and the core thread was filled with cotton. Moreover, it can be confirmed that the glitter material of the ornament part were designed with gold foil and has been analyzed with SEM-EDX.

• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.151-157
• /
• 2004

This research is to conservate the old hat and restore its shape and place it on a supportive form in a stable protective container. The hat is a homemade construction, utilizing three different machine made laces, and two cotton net fabrics. The exterior, particularly the top crown piece, as well as the lace along the brim's edge has been generally soiled and discolored. Inside the crown, the cotton net has broken threads, and thread loss in several areas. The paper covering the two wires is very weak, and has discolored the lace in the areas of contact. The plastic buckles of the velvet ribbon have also discolored the areas where there is contact. The wash/bleach bath procedure was very effective. Virtually all of the light brown surface discoloration stains were removed. The darker brown spots, particularly concentrated around the two paper covered wires and assumed to be rust, were $90\%$ removed by the treatment. The brown spots apparently were due to the degradation of the paper covering, and not caused by the wire itself. The buckram foundation lost about $50\%$ of its stiffness, but this was not a major concern due to the fact that this hat should remain it its mount, which has been designed to serve for both storage and exhibition purposes.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.509-515
• /
• 2015

Recent trends to reduce the size of mobile electronics products have driven miniaturization of various components, including screw parts for assembling components. Considering that the size reduction of screws may degenerate their joining capabilities, the size reduction should not be limited to the thread region but should be extended to its head region. The screw head is usually manufactured by forging in which a profiled punch presses a billet so that plastic deformation occurs to form the desired shape. In this study, finite element (FE) analysis was performed to simulate the forging process of a subminiature screw; a screw head of 1.7 mm diameter is formed out of a 0.82 mm diameter billet. The FE analysis result indicates that this severe forging condition leads to a generation of folding defects. FE analyses were further performed to find appropriate punch design parameters that minimize the amount of folding defects.