• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.4
• /
• pp.157-164
• /
• 2011

Long-term annual water balances are analyzed for two forest catchments located in Gwangneung covered with forests of different types and ages. The water balance trends of the two catchments from 1982 to 2009 are compared to identify the effect of forest growth and thinning on the water balance in a planted coniferous forest catchment. According to the averaged annual precipitation and runoff for the four designated periods from 1982 to 2009, the water balance of the old natural broad-leaved forest catchment (GB) remained relatively unchanged. In contrast, the young planted coniferous forest catchment (GC) showed significant changes in the water balance due to the forest growing and thinning. The results showed that the catchment runoff decreases with increasing tree age whereas the forest thinning results in an increase in catchment runoff. The mean annual runoff from the catchment GC after thinning increased by 1.7 times, compared with the mean annual runoff before forest thinning. The mean annual runoff from the catchment GB was very stable throughout the period. However, such an effect of forest thinning appeared to last only for about 10 year-period, after which the water yield increment in the catchment GC disappeared. It indicates that the proper forest management should be reconsidered at the interval of 10 years to effectively reduce water loss and increase water yield in the planted coniferous forest.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.3
• /
• pp.166-172
• /
• 2019

BACKGROUND: Increase in the ratio of small berries in blueberry production decreases the farmers' profits due to weakening market competitiveness and lowering harvest efficiency. One of the reasons for increased small berries is over fruit-load. For improving productivity and competitiveness of blueberry in Korea, hand-thinning can be applied to increase fruit quality before the developing adequate chemical thinning methods. This study was conducted to investigate the proper timing and methods for floral buds thinning in rabbiteye blueberry. METHODS AND RESULTS: Eight years old bushes of rabbiteye bluberries 'Brightwell' as a primary cultivar and 'Powderblue' as a pollinizer were used for this study. Fruit size distribution by leaf-to-fruit ratio was investigated by counting the number of leaves and fruits in canes of 127 'Brightwell' plants whose fruit set varied. Fifty percent of flowers/floral buds were removed in four different floral buds stages such as bud swell, late pink bud, full bloom, and petal fall, and the consumed time for thinning and fruit characteristics were recorded to investigate the effect and proper timing of floral buds thinning. Fruit weight and soluble solids content tended to increase in proportion to leaf-to-fruit ratio and the production of the number of fruits less than 13 mm in diameter decreased when leaf-to-fruit ratio was more than 2.5. Manual floral buds thinning by hands was fastest in full bloom stage and slowest in bud swelling stage. In all cultivars, fruit size was significantly smaller in non-thinning treatment than thinning, and there was, however, no significant difference in total fruit yield. The number of fruits less than 13 mm in diameter increased in both cultivars as floral buds thinning was delayed. Consumed time for picking 90% berries out of total berries per bush was shortest in full bloom stage thinning in 'Brightwell' and bud swelling, full bloom thinning in 'Powderblue'. These were 25 and 20 days faster than no thinning, respectively. CONCLUSION: Although the effect of floral buds thinning varied depending on the cultivars, our results confirmed that floral buds thinning was effective for the early intensive harvesting and the increase of the large fruit ratio and the harvesting productivity. Also, in order to increase thinning efficiency, it is recommended to remove the flower buds before the full bloom stage.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.217-222
• /
• 2007

Since 1973, we attain a successful achievement of nation-wide afforestation such as a thick forest and heaped-up leaves. However, the higher of the formation density in forest, the more dangerous to be a large-scale forest fire whenever fire occurs. According to the type of forest in the country, 42% of the forest is occupied by conifer forest that are highly flammable, and the distribution of forest age is in a transition period from immature forest to mature one. And the structure is too weak to the forest fire for the occurrence and spread because there are too many scrub and shrub trees in the forest. As a matter of course, it is on the increase of the thinning-forest that can shift the forest structure from a weak on forest fire to a strong one nowaday. In other words, thinning-forest has primary purposes such as the promotion of producing forest trees, production of excellent timbers, and build-up of public forest area. Furthermore, in some reports, the reduction of ladder fuel by eliminating the vertical/horizontal fuel in a forest and ensuring spaces in the forest can decrease the occurrence of forest fire and the risk of spread of burning as by-effect. Therefore, this study is designed to clarify the relation with the risk of forest fire by an on-spat-investigation of the characteristics of forest composition on the thinning and the non-thinning area.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.373-377
• /
• 2000

This study was carried out to verify the effect of fruit thinning on fruit development, and the results were as follows. The number of cells between fruit epidermis and periphery vascular bundle during 35 to 184 days after full bloom (DAFB) were constant with 14~17 cells, regardless of thinning at pink bud stage, fruitlet stage or non-thinning. However, the distance between epidermis and vascular bundle was longest in the fruit thinned at pink stage followed by fruits thinned at fruitlet stage and control. Therefore, it was seemed that the fruit size increment during 35 to 184 DAFB was due to the increment of cell size. Thinning time affected fruit size and the earlier the thinning times were the bigger the fruits were. However, there were no direct relationships between thinning time and the starch or tannin particle development in the cells of the fruit.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.208-213
• /
• 2007

This study is designed to provide forest managers and landowners with tools to estimate the effect of forest management on carbon storage, investigating living tree biomass, detritus, and harvested wood products as variables. Thinning, selection cutting, and uncutting were applied to the three different forest types in New York, USA. Carbon storage of the original stands was 90, 56, and $101Mg\;ha^{-1}$ at the Allegheny hardwood forest, Northern hardwood forest, and Oak - black cherry forest, respectively. Among treatments, uncutting generally stored the greatest amount carbon. However, the rate of carbon storage was the smallest at the uncut treatment in all the sites. The 50% thinning, 50% selection, and 50% thinning treatments were the highest rate of carbon storage at the Allegheny hardwood forest, Northern hardwood forest, and Oak - cherry forest, respectively. In this study, only short term was applied to simulate carbon sequestration after silvicultural treatment. So, more research is needed to determine whether any silvicultural treatment can store significantly more carbon than no treatment over the long term.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.606-613
• /
• 2005

Effects of circumferentially local wall thinning on the fracture behavior of pipes were investigated by monotonic four-point bending. Local wall thinning was machined on the pipes in order to simulate erosion/corrosion metal loss. The configurations of the eroded area included an eroded ratio of d/t= 0.2, 0.5, 0.6, and 0.8, and an eroded length of ${\ell}\;=10mm,$ 25mm, and 120mm. Fracture type could be classified into ovalization, local buckling, and crack initiation depending on the eroded length and eroded ratio. Three-dimensional elasto-plastic analyses were also carried out using the finite element method, which is able to accurately simulate fracture behaviors excepting failure due to cracking. It was possible to predict the crack initiation point by estimating true fracture ductility under multi-axial stress conditions at the center of the thinned area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.1014-1020
• /
• 2004

The present work complies the elastic stress concentration factor for a pipe with local wall thinning, based on detailed three-dimensional elastic FE analysis. To cover practically interesting cases, a wide range of pipe and defect geometries are considered, and both internal pressure and global bending are considered. Resulting values of stress concentration factors are tabulated for practical use, and the effect of relevant parameters such as pipe and defect geometries on stress concentration factors are discussed. The present results would provide valuable information to estimate fatigue damage of the pipe with local wall thinning under high cycle fatigue.

• Korean Journal of Ecology and Environment
• /
• v.53 no.2
• /
• pp.208-219
• /
• 2020

Forest thinning brought the large variation to forest ecosystem including environment and animal. Our study was result of long-term monitoring for ground-dwelling arthropod communities after thinning in forest ecosystem. In this study, we conducted field study on plantation forest in Chuncheon, Korea in 2018, and compared with previous study data (2006 and 2008). We found that the effect of thinning was still existent 10 years later from thinning with difference of habitat environment(depth of ground organic matter, coverage rate of ground vegetation and canopy). And ground-dwelling arthropod communities showed changes of abundance and taxa at the study area and thinning conditions. Ground-dwelling arthropod communities in 2018 were dominant in the order of Diptera, Hymenoptera, Coleoptera (Insecta), Araneae (Arachnida) and Collembola (Collembola). Among the conditions of thinning, Araneae (Arachnida), Coleoptera and Hymenoptera (Insecta) showed amount of abundance in heavy thinning. And Collembola (Collembola) and Diptera (Insecta) were most common in area of light thinning. In 2018 ground-dwelling arthropod communities, abundance of Diptera and Coleoptera (Insecta) and Isopoda (Crustacea) were decreased although Hemiptera and Orthoptera (Insecta) were increased than 2008 arthropod communities. Arthropod communities in 2018 were more similar with those in 2008 (after thinning) than with those in 2006 (before thinning).

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.263-268
• /
• 2008

Estimates of genetic gain (in volume growth) and diversity (expressed as status number, $N_s$) were determined in a clonal seed orchard of Pinus koraiensis. The genetic thinning was based on clonal breeding values (represented by general combining ability) obtained from progeny tests, clonal fertility estimated by strobilus production, and clonal size variation determined by the ramet numbers per clone. Parental GCA values for volume growth were calculated, based on height and diameter at breast height measured from field trials. Clonal fertility was estimated from the assessments of strobilus production over twelve years from 1991 to 2003, and used for the calculation of status number. There are 179 clones and 5,268 ramets in 12ha area of P. koraiensis clonal seed orchard. Genetic gain and diversity estimates were determined under assumptions of 30% pollen contamination and inferior genetic value of contaminating pollen. Genetic gain increased as thinning rates were set from 10% to 60%. However, for the higher thinning intensities, the increase of genetic gain was not remarkable. Genetic thinning by means of truncation selection resulted in a greater genetic gain but a large decrease in status number. Status number was represented around 40 clones for 10% through 60% thinning intensities, but for the higher thinning intensities, it was a bit fluctuated. Based on the present results, it could be concluded that thinning rate should not be stronger than 60% to optimize genetic gain while conserving genetic diversity. Consequently 50% or 60% thinning rate might be appropriate for genetic thinning in the clonal seed orchard of P. koraiensis. The effect of pollen contamination on the genetic gain and the consequence of genetic thinning for seed production in the clonal seed orchard, and seed orchard management scheme were also discussed.

• Korean Journal of Plant Resources
• /
• v.28 no.2
• /
• pp.290-295
• /
• 2015

The experiment were carried out in 7-year-old ‘Campbell Early’ grape to increase work efficiency by fruit cluster thinning methods (Pedicel and berry thinning). Pedicel thinning, such as labor-saving cluster thinning of grape, was 6.7 fold higher than the berry thinning for work efficiency. The fruit cluster weight and number of berry were lower in the fruit cluster thinning fruits than in the none-fruit cluster thinning, however, the soluble solid content (SSC) was high and titratable acidity (TA) was low in the fruit cluster thinning fruits than in the none-fruit cluster thinning fruits. Therefore, the bruising rate of berries was decreased in the fruit cluster thinning fruits. Quality uniformity by fruit cluster thinning was proper in fruit cluster weight of 350~450 g when SSC and TA in part of lower, middle and upper of cluster was considered.