• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.577-583
• /
• 2014

Benzyladenine (BA, 99% purity), MaxCel$^{(R)}$ (1.9% BA), Fruitone (3.5% NAA), MaxCel$^{(R)}$ + Fruitone, a nd s imazine were applied postbloom as fruitlet thinning agents to mature 'Hongro' and 'Fuji' apple (Malus domestica Borkh.) trees. BA and MaxCel$^{(R)}$ were applied at $100mg{\cdot}L^{-1}$ a.i. while Fruitone at $0.1mg{\cdot}L^{-1}$ a.i. and simazine at $400mg{\cdot}L^{-1}$ a.i. All PGRs were applied at 8 days after full bloom (DAFB, 6 mm fruit diameter) in both cultivars, while simazine was treated twice at 7 and 14 DAFB. In 'Hongro', the number of total fruit set per flower cluster in terminal buds was 1.67, 1.84, and 1.81 in MaxCel$^{(R)}$ + F ruitone, MaxCel$^{(R)}$, and simazine applications, respectively, when compared with 2.35 of water control. These reductions in fruit set were mainly attributed to the increased ratio of defruited clusters by the thinning agents. In 'Fuji' apple, the number of total fruit set per flower cluster in terminal buds was 1.29, 1.60, and 1.76 in MaxCel$^{(R)}$ + Fruitone, Fruitone, and MaxCel$^{(R)}$, respectively, when compared with 2.56 of water control in 'Fuji' apple. The addition of Fruitone to the MaxCel$^{(R)}$ promoted the thinning efficacy in both cultivars, compared to MaxCel$^{(R)}$ only. The thinning efficacies were similarly observed with lateral flowers in both cultivars. A significant increase of fruit weight by the postbloom thinning treatments was observed only in the BA application in 'Hongro', while the effect was observed in BA and MaxCel$^{(R)}$ in 'Fuji'. While the soluble solids content increased in the BA, MaxCel$^{(R)}$ and MaxCel$^{(R)}$+Fruitone treatments in both cultivars, other fruit quality attributes were not affected by the application of post-bloom thinning agents.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.24-31
• /
• 2016

This study investigated the effects of flower and fruit thinning agents on fruit set and harvested fruit quality attributes in 'Gamhong' apples. Lime sulfur, MaxCel (1.9% BA), and Fruitone (3.5% NAA) were applied either at post-bloom or fruitlet stages to mature 'Gamhong/M.9' trees. In 2011, the numbers of fruits per cluster in terminal flowers were 1.74, 0.82, and 1.15 for the control, lime sulfur, and Maxcel (applied at 10-mm fruit stage) treatments, respectively. The percentages of single fruit per cluster were 36.0, 47.9, and 48.7% for the control, lime sulfur, and Maxcel (10 mm) treatments, respectively, while the percentages of clusters with three fruits per cluster were 22.9, 1.4, and 5.8%. In lateral flowers, fruit numbers per cluster were 1.20, 0.36, and 0.50 for the control, lime sulfur, and Maxcel (10 mm) treatments, respectively. In 2012, all the thinning treatments showed a positive effect on flower and fruit thinning, compared with the control. Moreover, the treatment with thinning agents did not affect fruit quality. Overall, the results suggest that a single application of flower or fruit thinning agents would be sufficient, rather than the mixed application of thinning agents, based on the observed decrease in fruit setting.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.2
• /
• pp.179-186
• /
• 1997

In this paper we suggest a development of surface defect inspection algorithms for cold mill strip. The defects which exist in a surface of cold mill strip have a scattering or singular distribution. This paper consists of preprocessing, feature extraction and defect classification. By preprocessing, the binarized defect image is achieved. In this procedure, Top-hit transform, adaptive thresholding, thinning and noise rejection are used. Especially, Top-hit transform using local min/max operation diminishes the effect of bad lighting. In feature extraction, geometric, moment and co-occurrence matrix features are calculated. For the defect classification, multilayer neural network is used. The proposed algorithm showed 15% error rate.

• Journal of computational fluids engineering
• /
• v.19 no.4
• /
• pp.61-67
• /
• 2014

Since the most of the existing non-Newtonian models are not adequate to apply to the lattmce Boltzmann method, it is a challenging task from both the theoretical and the numerical points of view. In this research the hydro-kinetic model was modified and applied to the 3-D moving sphere in the circular channel flow and the characteristics of the shear thinning effect by the HK-model was evaluated and the condition of ${\Gamma}$ in the model was suggested for the stable simulation to generate non-trivial prediction in three dimension strong shear flows. On the wall boundaries of circular channel the curved wall surface treatment with constant velocity condition was applied and the bounceback condition was applied on the sphere wall to simulate the relative motion of the sphere. The condition is adequate at the less blockage than 0.7 but It may need to apply a multi-scale concept of grid refinement at the narrow flow region. to obtain the stable numerical results.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.27-29
• /
• 1975

The experiment was carried out to establish a reasonable harvesting method of mulberry shoots with branches by thin out in spring, comparing with thin-out harvest, and the results are as follows. 1. In spring, the thin-out harvest showed no remarkable effect in the results of seven days interval cutting down, except for the treatment of thinning-out thinner branches. 2. There was no significance between the control and the thinning-out thinner branches, but a tendency to increase a little harvest. Therefore, few shoots of thin branches should be cut down for the 4th instarlarvae and the rest of branches for the 5th instarlarvae. 3. The thin-out of the thicker branches showed the worst result of others, because it can hardly expect for 7 days after cutting down the thicker branches.

• Journal of the Korean Ceramic Society
• /
• v.45 no.2
• /
• pp.99-104
• /
• 2008

Zeta potential, sedimentation bulk density and rheology in the dispersion system have been studied in terms of solid loading (40-55 vol%), and types of additives. Ammonium polymethacrylate, glycerol, ethoxylated acetylenic diol, and polyvinyl alcohol have been used as the dispersant, cryo-protectant, surfactant, and binder, respectively. Sedimentation density greatly increased upon adding dispersant; the effect was more pronounced with ionic alumina suspension compared with covalent silicon carbide. With further addition of cryo-protectant and surfactant to dispersant, the sedimentation density increased somewhat. The suspension viscosity generally behaviored in an opposite manner to the sedimentation density, i.e., high sedimentation gave low high-shear viscosity, indicative of low order structure formation in the suspended particles. Shear rate rheology in shear rate of $2-300\;sec^{-1}$ showed a shear thinning and its onset began at similar shear rate (${\sim}100\;sce^{-1}$), regardless of solid loading.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.123-128
• /
• 2000

Fundamental and informative data of axi-symmetric stretch-drawing of several sheetmetals with thicknesses of 0.7-1.0mm are presented both for single and double operations. Very small radius is applied to the die profile (or-shoulder) ion all operations. to induce wall-thinning by the effect of bending-under-tension from which the name 'stretch-drawing' comes. It is clearly demonstrated that deeper cups could be formed by single and double stretch-drawings from smaller circular blanks due to such wall-thinning action than in the usual deep-drawing of larger blanks, From this fact it is emphasized that the deep-drawability of a sheet metal is not evaluated simply by the conventional L.D.R (limiting drawing ratio) but the depth of the drawn cup should also be taken into account./ Many experimental data about various metals and thicknesses given in this paper offer a valuable information in this process for more general use which recommends to replace the conventional deep-drawing process by the stretch-drawing process both for single and double operations. In the single stretch-drawing it is also confirmed that a deeper cup can be produced by raising the blank-holding force at later stage of operation.

• Tribology and Lubricants
• /
• v.15 no.4
• /
• pp.343-353
• /
• 1999

The role of viscosity index improver's(Ⅶ) additives for modem engine lubrication is complex. Under the condition of atmosphere or low shear rate, the characteristics of Ⅶ added lubricant is verified and quoted frequently for mathematical model of lubricant behavior. However, recent research shows that added lubricant has the characteristics of shear thinning at high shear rate condition although it performs well enough over the whole range of working temperature. At high shear rate, they show significant decrease of apparent viscosity irrespective of temperature. Many experimental researches verify that Ⅶ added lubricant shows boundary film layer formation on the solid surface as well as shear thinning effect by its polymeric molecular characteristics. The intend of our research is to verify the effects of Ⅶ from the viewpoint of continuum mechanics, because conventional Reynolds'equation with only pressure-viscosity relation cannot fully predict the lubricant behavior under the Ⅶ added condition. In these aspects, Reynolds'equation of Newtonian fluid model lacks the reflection of real fluid behavior and there is no way to explain the non-linear characteristics of Ⅶ added lubricant. In this research, we mathematically modeled the Ⅶ added lubricant behaviors which are the characteristics of non-Newtonian fluid behavior at high shear rate and boundary film formation on the solid surface. The consideration of elastic deformation in the contact region is also included in our computation and finally the converged film pressure and the film thickness with elastic deformation are obtained. The results are compared with those of Newtonian fluid model.

• Journal of ILASS-Korea
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2013

Wall thinning of pipeline in power plants occurs mainly by flow acceleration corrosion (FAC), cavitation erosion (C/E), liquid droplet impingement erosion (LDIE). Wall thinning by FAC and C/E has been well investigated; however, LDIE in plant industries has rarely been studied due to the experimental difficulty of setting up a long injection of highly-pressurized air. In this study, we designed a long-term experimental system for LDIE and investigate the behavior of LDIE for three kinds of materials (A106B, SS400, A6061). The main control parameter was the air-water ratio (${\alpha}$), which was defined as the volumetric ratio of water to air (0.79, 1.00, 1.72). In order to clearly understand LDIE, the spraying velocity (${\nu}$) of liquid droplets was controled larger then 160 m/s and the experiments were performed for 15 days. Therefore, this research focuses relation between erosion rate and air-water ratio on the various pipe-flow materials. NPP(nuclear power plant)'s LDIE prediction theory and management technique were drawn from the obtained data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1399-1406
• /
• 2005

Recently authors have proposed a new method to estimate failure strength of a pipe with local wall thinning subject to either internal pressure or global bending. The proposed method was based on the equivalent stress averaged over the minimum ligament in the locally wall thinned region, and the simple scheme to estimate the equivalent stress in the minimum ligament was proposed, based on the reference stress concept. This paper extends the new method to combined internal pressure and global bending. The proposed method is validated against FE results for various geometries of local wall thinning under combined loading. The effect of internal pressure is also investigated in the present study. Comparison of maximum moments, predicted according to the proposed method, with published full-scale pipe test data fur locally wall-thinned pipes under combined internal pressure and global bending, shows good agreement.