• Tribology and Lubricants
• /
• v.25 no.5
• /
• pp.348-358
• /
• 2009

To satisfy the more severe emission regulation and the demand of higher fuel economy in near future, the combustion pressure and power output of engines is going to be higher. In order to get the reduction of engine emission and the higher power, it is needed the reduction of the tension and width of ring pack. The lower tension ring and the manufacturing technology of cast iron thinner width ring can bring the friction reduction between the ring and liner during engine running. Therfore, the fuel economy can be achieved. Thereafter the engine emission can be reduced. In this study, by using a developed basic computer program that predicts the inter-ring pressure, the motion of ring and the inter-ring pressure through a crevice volume model between adjacent rings, and the oil film thickness and the friction computed by lubrication theories, it is to be examined the effect of friction reduction from piston ring pack equipped with thinner width ring and lower tension ring.

• Tribology and Lubricants
• /
• v.25 no.5
• /
• pp.311-317
• /
• 2009

To satisfy the more severe emission regulation and the demand of higher fuel economy in near future, the combustion pressure and power output of engines is going to be higher. In order to get the reduction of engine emission and the higher power, it is needed the reduction of the tension and width of ring pack. The lower tension ring and the thinner width ring can bring not only the friction reduction between the ring and liner during engine running, but also the adjustment of the blow-by gas and oil consumption by changing in the pressure in the crevice volume and the axial motion of rings togethe with the adjustment of the inter-ring crevice volumes. In this study, by using a developed basic computer proglram that predicts the blow-by gas and oil consumption of engines, it is to be examined how satisfying the level of the blow-by gas and oil consumption as being installed the piston ring pack with thinner width ring and lower tension ring.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.67-78
• /
• 1987

This study was designed to investigate the effect of board thickness and ring angle on the characteristics including internal check. ring failure, surface check, end check, collapse, thickness shrinkage and width shrinkage of press-drying. The exprimental materials of 6mm-. 9mm- and 12mm-thick board were taken from heartwood and sapwood of oak (Quercus acutissima Carr.) respectively. And boards were numbered according to position in the log(No. 1 to No. 4 for heartwood :md No. 9 for sapwood). Press-drying was at $145^{\circ}C$ platen temperature and 3.5kg/$Cm^2$ platen pressure. The results of this study were summarized as follows. 1. Drying rates for sapwood materials were greater than those for heartwood materials. And drying rates for thinner materials were greater than those for thicker materials. 2. The thinner boards were. the severer surface checking developed in the heartwood materials, and surface checking for heartwood materials had no tendency in board position for the same thickness. Sapwood materials were completely free from surface checking. 3. End checking for heartwood materials had no tendency in board position. The greater deviation of ring angle from perfectly edge-grained was, the severer and checking developed in the sapwood materials. But end checking did not occur in 6mm-thick sapwood materials. 4. The greater deviation of ring angle from perfectly edge-grained was, the severer end checking developed for heartwood and sapwood materials. As board thickness increased, maternal checking developed more severely for heartwood and sapweed materials. 5. For heartwood materials, ring failure, reduced with increasing deviation of ring angle from perfectly edge-grained except 12mm-thick material and showed no significant difference attributable to board thickness. Sapwood materials were completely free from ring failure. 6. For heartwood and sapwood materials, collapse was slight and showed no significant differences attributable to both board thickness and board position. 7. As deviation of ring angle from perfectly edge-grained increased, shrinkage of board thickness decreased for heartwood and sapwood materials. 8. Shrinkage of board width showed no significant differences attributable to both board thickness and board position for heartwood and sapweed materials.

• Applied Microscopy
• /
• v.41 no.3
• /
• pp.205-213
• /
• 2011

Numerous anisakids were parasitic near the digestive tract of the black rockfish, Sebastes schlegeli and some anisakids observed on the liver of the host. Anisakids in the host were identified three species (Hysterothylacium sp., Anisakis simplex, A. pegreffii) and Hysterothylacium sp. was the high occurrence of anisakid worms in the host. Hysterothylacium sp. was shorter and thinner than A. simplex. Both of anisakids observed lip, mouth, nerve ring, excretory pore and excretory duct in the anterior portion. In the mid portion, anisakids had esophagus, ventriculus and intestine and especially, Hysterothylacium sp. had intestinal ceacum and ventricular appendage. There was conical nodulose apex at the end of the posterior portion in Hysterothylacium sp. and spine in A. simplex. SEM examination revealed that there was three lip near the mouth of Hysterothylacium sp. Dorsal lip was approximately 65 ${\mu}m$ and paried lateroventral lip were approximately 60 ${\mu}m$ in the width. All lips were found double papilla (approximately 8 ${\mu}m$ in the width). The body width of the Hysterothylacium sp. and A. simplex was approximately 480 ${\mu}m$ and 900 ${\mu}m$ respectively. The hight of the lateral alae was about 7 ${\mu}m$ and width of papilla on the cornical nodulose apex was about 3.3 ${\mu}m$ in Hysterothylacium sp. The hight of spine was approximately 20 ${\mu}m$ in A. simplex. There was mainly Hysterothylacium sp. in the intestinal lumen of the host. The nematod worms were parasitic near the mucosal fold and in the submucosal. In the mucosal epidermal layer, it was increased mucous cells by the infection of the parasites.