• The Korean Journal of Ecology
• /
• v.19 no.4
• /
• pp.253-261
• /
• 1996

This study was conducted to clarify the relationship between bird community and forest structure from early May to mid June, 1988 in two sites which had different forest structures due to silvicultural practice, located in the Tomakomai Experimental Forest of Hokkaido University, Hokkaido, Japan. Quantitative ahbitat analysis was applied to elucidate difference between the two study sites, and territory mapping method and guild analysis were used for assessment of the bird community. Dominant tree species were Quercus mongolica, Magnolia obovata, Prunus sargentii, Acer mono and Tilia japonica. Unithinned site had more foliage coverage in upper and middle layers, but in lower layer had less coverage than thinned site. Thirty four species of birds were recorded and of them only 21 species occupied territories within the study area. Dominant species were Ficedula narcissina, Phylloscopus occipitalis, Parus major, Passer rutilans, Sitta europaea and Parus palustris in the study area. The unmber of breeding species of the two sites were equal, but the species composition of breeding bird communities was different between the sites. The number of species and pairs on hole-nesting guild were greater in the unthinned site, but those on ground-nesting guild were greater in the thinned site. Canopy-nesting guild showed no significant difference between the two sites. Silvicultural practice such as proper thinning appeared to be not inadequate to all of the forest birds, probably good to bush and ground nesting guild, and to tree & bush and ground foraging guild. The silvicultural practice also did not considerably affect the hole and canopy-nesting guild.

• Journal of Forest and Environmental Science
• /
• v.18 no.1
• /
• pp.87-96
• /
• 2001

In order to investigate the influence of increased seed production of Korean white pine(Pinus koraiensis S. et Z.), component of seeds, produced from trees in the thinned stand and the stem-pruned trees in the seed orchard, were analyzed. The results obtained were as follows: 1. General component analysis of seed There is no significant influence of thinning on the seed component in moisture content (thinned- 4.10%, unthinned- 3.74% ), ash (thinned- 2.95%, unthinned- 2.94%), crude lipid (thinned- 67.62%, unthinned- 71.94%), and crude protein (thinned- 17.27%, unthinned- 17.50%). There is no significant influence of stem-pruning on the seed component in moisture content (unpruned- 4.26%, 1m stem-pruned- 4.10%, and 2m stem-pruned- 3.99%), ash (unpruned- 2.08%, 1m stem-pruned- 2.09%, and 2m stem-pruned- 2.15%) crude lipid(unpruned- 68.59%, 1m stem-pruned- 69.52%, and 2m stem-pruned- 72.53%), and crude protein (unpruned- 18.13%, 1m stem-pruned- 17.96%, and 2m stem-pruned- 17.56%) 2. Fatty acid analysis Seeds of tree from thinned and unthinned stands contained two essential fatty acids, i.e., linoleic acid (18:2) (thinned- 54.92%, unthinned- 55.40%) and linolenic acid (18:3) (thinned- 0.19%, and unthinned- 0.23%). Over 94% of fatty acids consisted of linoleic acid (18:2)(55%), oleic acid (18:1) (32%), and palmitic acid (16:0)(7%). T-test showed difference of content at 1% significance level for palmitoleic acid (16:1), stearic acid (18:0) and 8.11, 14-eicosatrienoic acid (20:3) and at 5% for linolenic acid (18:3), but no significant difference for three major fatty acids mentioned above, between two types of trees. Thus thinning may give no influence in fatty acid content. Seeds of three types of trees contained two essential fatty acids, i.e., linoleic acid (18:2)(unpruned- 55.25%, 1m stem-pruned- 54.74%, and 2m stem-pruned- 55.00%), and linolenic acid (18:3)(0.21% for three kinds of trees). Linoleic acid (18:2)(55%), oleic acid (18:1) (32%), and palmitic acid (16:0)(6%) consisted of more than 93% of all fatty acid content. At 5% significance level in F-test, difference was observed in the content of palmitoleic acid (16:1) and 8.11, 14-eicosatrienoic acid (20:3), but not in three major types of fatty acids above mentioned. It is observed that stem-pruning gave no significant influence in fatty acid content in general.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.70-77
• /
• 1999

Objective of this research is to obtain fundamental data of carbonized wood wastes for soil condition, de-ordorization, absorption of water, carrier for microbial activity, and purifying agent for water quality of river. The carbonization technique and the properties of carbonized wood wastes(thinned trees) are analyzed. Proximate analysis shows the thinned wood contains 0.22-0.73% ash, 77-80% volatile matter, and 10-14% fixed carbon. The charcoal yield decreases and the shrinkage rate increases as the carbonization temperature and time increase. The charcoal yields of Larix leptolepis, Pinus rigida and Pinus densiflora are high, whereas those of Pinus koraiensis and Quercus variabilis are low. The shrinkage rate by carbonization has same trend as water removal of wood. The specific gravity after the carbonization decreases about 50% comparing to green wood. The charcoal has 0.89-4.08% ash, 6.31-13.79% volatile matter, and 73.9-83.5% fixed carbon. As the carbonization temperature and time increase, pH of charcoal increases. When the carbonization temperature is $400^{\circ}C$, pH is about 7.5. When the temperature is between 600 to $800^{\circ}C$, pH is about 10 with small difference. The water-retention capacity is not affected by the carbonization temperature and time. The water-retention capacity within 24hr is about 2.5 - 3times of sample weight, and the equivalent moisture content becomes 2-10% after 24 hr.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.127-132
• /
• 2019

This study aimed to investigate the differences in habitat environment and characteristics of small rodent populations with time elapse after thinning in Japanese larch (Larix kaempferi) plantations, Mt. Janggun, Gyeongbuk Province, South Korea. We found that there were significant differences in habitat environment, number of tree, shrub stems, coverage of overstory, midstory, rock and number of coarse woody debris (CWD) between thinned and unthinned forest stands. We captured four small rodent species. Total number of captured small rodent were higher in thinned stands. Male-to-female ratio of Apodemus agrarius, and A. peninsulae were both the highest in forest stand 3 year after thinning. The differences in number of captured and sex ratio of small rodents might be related to habitat environment between thinned and unthinned stands. Thus, thinning can provide good habitat for small rodents by developing understory vegetation and increasing CWD in Japanese larch plantations. These results suggest that forest management through maintenance of CWD and induction of midstory and understory vegetation after thinning is necessary to maintain small rodents diversity.

• Journal of Ecology and Environment
• /
• v.30 no.4
• /
• pp.281-285
• /
• 2007

We conducted research to determine the effects of forest tending works (FTW) on forest carbon (C) storage in Korean red pine forests by estimating changes in the quantity and distribution of stored organic C in an approximately 40-year-old red pine stand after FTW. We measured organic C storage (above- and belowground biomass C, forest floor C, and soil C at 50 cm depth) in the Hwangmaesan Soopkakkugi model forest in Sancheonggun, Gyeongsangnam-do before and after the forest was thinned from a density of 908 trees/ha to 367 trees/ha. The total C stored in tree biomass was 69.5 Mg C/ha before FTW and 38.6 Mg C/ha after FTW. The change in total C storage in tree biomass primarily resulted from the loss of 19.9 Mg C/ha stored in stem biomass after FTW. The total C pool in this red pine stand was 276 Mg C/ha before FTW and 245.1 Mg C/ha after FTW. Prior to FTW, 71.5% of the total C pool was stored in mineral soil, 25.2% in tree biomass, and 3.3% in the forest floor, where as after FTW 80.5% of the total C pool was stored in mineral soil, 15.7% in tree biomass and 3.7% in the forest floor. These results suggest that the development of site-specific tending techniques may be required to minimize the loss of tree biomass C storage capacity in red pine stands from FTW.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.261-263
• /
• 2005

In this paper, we implement an identification system using the vein image of the hand. The vein pattern is obtained in the grey-scale 2D image through the infrared-red imaging from back of the hand. Since the frame has lack of clearance, we use some enhancing methods such as the complement, addition, and multiplication to the image to increase the contrast. After Wiener filtering for smoothness of the vein pattern, we transform the image into the binary image with mean function. The binarized image is session thinned and the cross-points in the vein tree are obtained by calculating the number of pixels connected because the image is shaped as a tree. We choose the point and find the nearest to the center if it has majority, where we find the two end points of the selected line. We can get the angle between the two lines joined at the cross-point and store its coordinates, angle, and label the values. The values are used as the feature vector of the vein pattern. This procedure is similar to the human cognition sequences. It is shown that the proposed method is simple for the vein recognition.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.5
• /
• pp.15-21
• /
• 1977

The syntactic pattern recognition system of Korean characters is composed of three main functional parts; Preprocessing, Graph-representation, and Segmentation. In preprocessing routine, the input pattern has been thinned using the Hilditch's thinning algorithm. The graph-representation is the detection of a number of nodes over the input pattern and codification of branches between nodes by 8 directional components. Next, segmentation routine which has been implemented by top down nondeterministic parsing under the control of tree grammar identifies parts of the graph-represented Pattern as basic components of Korean characters. The authors have made sure that this system is effective for recognizing Korean characters through the recognition simulations by digital computer.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.41-48
• /
• 1985

In near future about 500,000 hectares of Japanese larch and pitch pine need thinning to improve crop-tree spacing and reasonable species composition in Korea. Although thinned trees show very little high quality wood, in fact, all the sawed products are suitable for construction and farming materials. Studies on the utilization of thinned small-diameter trees have been implemented in order to increase lumber yield and display the skeleton of farm buildings. The results obtained in this study were summarized as follows: 1. According to Korean Conifers Log Grading System, log grade 3 was 87.4 percent in Japanese larch bolts and 95.8 percent in pitch pine bolts from thinned trees. The ability to identify defects was essential for grading logs. 2. Cutting diagrams of sawing were developed for 1-sided sawing, 2-sided sawing and 3-sided sawing by small end diameter class of bolt and cutting sizes also were found to use effectively lumber with wane. 3. Lumber recovery of Pitch pine was a little higher than that of Japanese larch. The maximum lumber yields of pitch pine by sawing patterns were 87.2 percent for 1-sided sawing, 80.8 percent for 2-sided sawing an 64.1 percent for 3-sided sawing, up yield compared with 58.1 percent for 4-sided sawing. The lumber yield of 1, 2 and 3-sided sawing significantly was higher value than that of 4-sided sawing. 4. Lumber was inspected and graded. Lumber quality of diameter class 12cm was a little better than that of diameter class 8cm, but 90 percent of lumber in diameter c1ass 16cm fell into grade 3. The lumber grade was classified by Korean standard grades of confiers lumber. 5. Lumber from 1, 2 and 3-sided sawing was used to build the skeleton of a farm house ($53m^2$) and greenhouse ($60m^2$) in order to display more efficient use of small diameter trees from thinning 6. Total volume of timber for building a farm house was $8.1m^3$ of imported timber. Timber of $7m^3$, 70 percent of total volume would be substituted imported timber for domestic timber.

• Journal of Forest and Environmental Science
• /
• v.39 no.4
• /
• pp.195-202
• /
• 2023

In this study, we sought to compare and evaluate the accuracy and predictive performance of machine learning algorithms for estimating the growth of individual Larix kaempferi trees in Gangwon Province, Korea. We employed linear regression, random forest, XGBoost, and LightGBM algorithms to predict tree growth using monitoring data organized based on different thinning intensities. Furthermore, we compared and evaluated the goodness-of-fit of these models using metrics such as the coefficient of determination (R²), mean absolute error (MAE), and root mean square error (RMSE). The results revealed that XGBoost provided the highest goodness-of-fit, with an R² value of 0.62 across all thinning intensities, while also yielding the lowest values for MAE and RMSE, thereby indicating the best model fit. When predicting the growth volume of individual trees after 3 years using the XGBoost model, the agreement was exceptionally high, reaching approximately 97% for all stand sites in accordance with the different thinning intensities. Notably, in non-thinned plots, the predicted volumes were approximately 2.1 m³ lower than the actual volumes; however, the agreement remained highly accurate at approximately 99.5%. These findings will contribute to the development of growth prediction models for individual trees using machine learning algorithms.

• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.21-30
• /
• 1977

Japanese larch (Larix leptolepis) is one of main timber species in Korea that could find much plantation and growing stands on all over the country. It is thought to be in meaningful that a guiding diagram for density control of Japanese larch stands is made to estimate easily the density conditions in the quantitaive, ecological and economic viewpoint. Sample plots for this study are selected from the stands that have not been thinned in recent years, and mean height, mean diameter, dominant height, tree numbers per hectare and stem volume of mean tree are calculated from the each sample plots among total 165 plots In this study, especially, the theory of slenderness of mean tree are applied, that have been identified through the results of the spacing trial. Relative growth characteristics of this species are calculated from the general logistic curve and its formula is $Y=ax^b$. Relatwion between the measured items are found out as follows: 1. Relation between the mean height and tree numbers per hectare by slender class is showing the high correlation as table 1 and fig. 2, and between mean diameter and tree numbers per hectare is also high correlation as table 1 and fig 3. 2. The stem volume can be correctly estimated from height in case that slender class may be known, as showing in table 3 and fig. 4. 3. The stem volume can be more correctly estimated from the relation with $D^2H$ as formula, $Log_e\;V=0.9569\;Log_eD^2H-9.8431$, and relation between stem volume of single tree or volume per hectare and tree numbers per hectare are as following formulas: $Log_e$ stem volume=9.5026-1.6800 $Log_e$ tree numbers per hectare $Log_e$ stem volume per hectare=9.4911-0.6784 $Log_e$ tree numbers per hectare. Stem volume of mean tree, tree numbers per hectare and stem volume per hectare correspond to the mean tree height are calculated to slender class as table 5, 6, 7. Through the above steps, the diagram for density control of Japanese larch are produced as fig. 9. It is thought that this diagram could be applied to control the density of Japanese larch stands.