• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.51-55
• /
• 2000

The woodceramics which are new porous carbon materials were obtained by carbonizing from thinned small log of Aomori HIBA (Thujopsis dolabrata S. et. Z. var. hondae M.) impregnated with phenol resin in a vacuum furnace. During the carbonization process, the resin changes into glassy carbon, which has superior property. The resin impregnation rate and bending strength depend on the types of board and density. In this paper, the manufacturing method of woodceramics made from thinned small logs of Aomori HIBA was introduced and some properties were examined.

• Journal of Forest and Environmental Science
• /
• 제9권1호
• /
• pp.33-43
• /
• 1993

우리나라 전체 산림(山林)의 약 67%가 II 영급(齡級)이하의 유령림(幼齡林)이며 흉고직경(胸高直徑) 16cm이하의 간벌(間伐) 소경재(小徑材)를 생산할 수 있는 III 영급(齡級)까지 합산하면 전체 산림(山林)의 90%이상을 차지한다. 그러므로 본연구에서는 간벌재(間伐材)와 소경재(小徑材)가 밀접한 연계성(連繫性)을 가지고 있음을 감안하여 우리나라 간벌재(間伐材) 생산(生産)의 실태분석(實態分析), 문제점(問題點) 및 개선책(改善策), 그리고 건의사항(建議事項)등을 제시해 보았다.

• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.7-17
• /
• 1991

The feasibility of treating three softwood(Japanese larch pitch pine, and Korean pine) thinned logs by double-diffusion treatment processes was investigated. Some posts were incised before immersion, and others were imersed in hot copper sulfate solution. Comparison among species indicated that. in general, pitch pine was most treatable and Japanese larch least treatable. For all three species, almost all treatment schedules gave consistently good penetration and high net retention, but very steep gradient of preservative distribution. As expected, the treatability was increased by the extension of immersion time, increased concentration of treating solution, incising. and heating of the first solution. Of the variables tested, it appears that heating of the first solution is the most important. From the data in this paper, it may be concluded that, if the first solution is not heated, the best schedule is #3. If the first solution is healed. it appears the best schedules are #10 or #11. Since heating of the first solution improves the treatability. schedules # 10 or :#11 are recommended if the cost of heating might be justified. The data presented in this paper indicate that double-diffusion treatment processes seem to offer a promise as a comparatively effective and easy-operating method of treating thinned logs for the small-scale production of treated stock.

• 농업과학연구
• /
• 제37권3호
• /
• pp.457-464
• /
• 2010

The low melting alloy impregnated wood composites with natural grain of thinned Juglans mandshurica was made and evaluated in this study. And the proper manufacturing conditions was also investigated in this study. The low melting alloy with bismuth(Bi) and tin(Sn) which are harmless to humans, was applied for this novel composites, which showed not only no defects of discoloration, delamination, swelling, and cracking, because of high dimensional stability and low thickness swelling, but also much improved performance such as high bending strength, high hardness, low abrasion, high thermal conductivity as floor materials. This study also suggested the proper impregnating condition, such as 10 minutes of the preliminary vacuum time, $187^{\circ}C$ of the heating temperature and 10 minutes of the maintaining pressure time at the pressure of 30kgf/$cm^2$. The produced composites showed 9 times higher density for small specimen, 6.6 times for actual size sample and great increase in bending strength from 102.05N/$mm^2$ to 189.47N/$mm^2$ for small size sample and to 205.4N/$mm^2$ for actual size sample, also great increase in hardness from 15.1N/$mm^2$ to 73.38N/$mm^2$ for small size sample and 64.87N/$mm^2$ for actual size sample. And the composites demonstrated great decrease in abrasion depth and in water absorption.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.56-60
• /
• 2000

A new porous carbon material "woodceramics" was developed by carbonizing wood or woody materials impregnated with thermosetting resin. Steamed board and non-steamed board were made from thinned small log of Aomori Hiba (Thujopsis dolabrata S. et. Z. var. hondae M.). They were impregnated with phenol resin and sintered in a vacuum furnace at $650^{\circ}C$. In this paper, the manufacturing method of woodceramics and changes of dimension, weight and compressive strength were investigated. The changes of dimension, weight and compressive strength depend on the types of board and density.

• Journal of the Korean Wood Science and Technology
• /
• 제30권4호
• /
• pp.58-65
• /
• 2002

본 연구는 수액치환법을 이용한 침엽수 간벌소경재나 미(저)이용 활엽수재의 산지 보존처리 기술을 개발하기 위하여 수행되었다. 본 논문에서는 증산법과 원구법을 이용한 3종 침엽수와 3종 활엽수의 방부제, 난연제, 치수 안정제 처리 가능성을 조사하여 보고한다. 수종과 처리약제의 조합에 관계없이 원구법이 증산법에 비하여 약제의 목재내 침투가 양호할 뿐만 아니라 약제의 침투가 균일한 관계로 수분 이동경로를 이용한 처리재 생산은 원구법의 사용이 바람직하였다. 원구법 처리는 수관부를 절단한 후 실시하기 때문에 증산법에 비하여 처리가 용이할 뿐만 아니라 벌채 및 조재 후 산지의 일정 장소로 운재 후 처리를 실시하기 때문에 증산법과 비교할 때 집약적 처리로 단위시간당 처리재 생산량이 높고 산지 환경오염 문제도 예방할 수 있는 장점이 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.547-556
• /
• 2019

Thinned, small larch logs have small diameters and no value-added final use, except as wood chips, pallets, or fuel wood, which are products with very low economic value; however, their mechanical strength is suitable for structural applications. In this study, small larch logs were sawed, dried, and cut into square timbers (with a $90mm{\times}90mm$ cross section) that were laterally glued to form core panels used to manufacture cross-laminated timber (CLT) wall panels. The surface and back of these core panels were covered with 12-mm-thick structural plywood panels, used as cross bands to obtain three-ply CLT wall panels. This attachment procedure was conducted in two different ways: gluing and pressing (CGCLT) or gluing and nailing (NGCLT). The size of the as-manufactured CLT panels was $1,220mm{\times}2,440mm$, the same as that of the plywood panels. The final wall panels were tested under lateral shear force in accordance with KS F 2154. As the lateral load resistance test required $2,440mm{\times}2,440mm$ specimens, two CLT wall panels had to be attached in parallel. In addition, the final CLT panels had tongued and grooved edges to allow parallel joints between adjacent pieces. For comparison, conventional light-frame timber shear walls and midply wall systems were also tested under the same conditions. Shear walls with edge nail spacing of 150 mm and 100 mm, the midply wall system, and the fabricated CGCLT and NGCLT wall panels exhibited maximum lateral resistances of 6.1 kN/m (100%), 9.7 kN/m (158%), 16.9 kN/m (274%), 29.6 kN/m (482%), and 35.8 kN/m (582%), respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.41-48
• /
• 1985

In near future about 500,000 hectares of Japanese larch and pitch pine need thinning to improve crop-tree spacing and reasonable species composition in Korea. Although thinned trees show very little high quality wood, in fact, all the sawed products are suitable for construction and farming materials. Studies on the utilization of thinned small-diameter trees have been implemented in order to increase lumber yield and display the skeleton of farm buildings. The results obtained in this study were summarized as follows: 1. According to Korean Conifers Log Grading System, log grade 3 was 87.4 percent in Japanese larch bolts and 95.8 percent in pitch pine bolts from thinned trees. The ability to identify defects was essential for grading logs. 2. Cutting diagrams of sawing were developed for 1-sided sawing, 2-sided sawing and 3-sided sawing by small end diameter class of bolt and cutting sizes also were found to use effectively lumber with wane. 3. Lumber recovery of Pitch pine was a little higher than that of Japanese larch. The maximum lumber yields of pitch pine by sawing patterns were 87.2 percent for 1-sided sawing, 80.8 percent for 2-sided sawing an 64.1 percent for 3-sided sawing, up yield compared with 58.1 percent for 4-sided sawing. The lumber yield of 1, 2 and 3-sided sawing significantly was higher value than that of 4-sided sawing. 4. Lumber was inspected and graded. Lumber quality of diameter class 12cm was a little better than that of diameter class 8cm, but 90 percent of lumber in diameter c1ass 16cm fell into grade 3. The lumber grade was classified by Korean standard grades of confiers lumber. 5. Lumber from 1, 2 and 3-sided sawing was used to build the skeleton of a farm house ($53m^2$) and greenhouse ($60m^2$) in order to display more efficient use of small diameter trees from thinning 6. Total volume of timber for building a farm house was $8.1m^3$ of imported timber. Timber of $7m^3$, 70 percent of total volume would be substituted imported timber for domestic timber.